Upgrade your motorhome or camper with the HCS-T100 Alpine 360° camera system and get a great view while parking or maneuvering your vehicle.
The new system includes 4 HD cameras with silver mounts, a main control unit and all necessary cables to complete the installation.
When used with Alpine's touchscreen, you can simply touch-control the video settings directly from the head unit (feature will be enabled after a software update in summer 2023). It is also compatible with third-party displays (analog video signal and remote control).
You can expand the system even further with up to 4 additional cameras: monitor your pets traveling with you at the back of the cabin, monitor greywater disposal or even height clearance on narrow bridges. There are several additional cameras to choose from.
Get the maximum overview with the top view and even use the split screen setting to show 2 camera angles at once. The system also completely eliminates all blind spots in a turn to prevent accidents.
Alpine 360° video experience
360° camera systems used to be exclusive to the latest high-end passenger cars, but now they can also be fitted to campervans and motorhomes. The all-new Alpine HCS-T100 camera system provides maximum visibility, visibility and safety, and can be installed in virtually any motorhome. 4 HD cameras on the front, sides and rear of the vehicle allow the control unit to create a complete 360° view of the vehicle's environment.
View from above
The overhead view shows your motorhome and the surrounding area directly from above. This gives you maximum visibility when parking or maneuvering to prevent accidents and reduce driver stress.
Split screen
One of the key features of the HCS-T100 camera system is the ability to display 2 camera modes simultaneously. For example, you can display an overhead view and a corner view in a split screen to increase overall driving awareness.
4 HD widescreen cameras
The package includes 4 HD widescreen cameras with 1280 x 720p resolution and 190° (H) / 119° (V) viewing angles. Each camera comes with a silver universal mounting bracket (note that your vehicle must have holes drilled in the body for the video signal cables) and has a cable of sufficient length (5mx 1 front camera, 10mx 2 side cameras, 18mx 1 rear camera).
Choice of camera angle
You can switch camera angles using the included wired remote control. in 2023 a software update coming in the summer to allow full touch control of all settings and camera angles when using a system with a compatible Alpine Head Unit with touch screen. If you use the HCS-T100 with a third-party monitor, you can control all settings with the remote control.
Eliminates blind spots
This camera system contributes significantly to driving safety by virtually eliminating blind spots. If you are using your vehicle's left or right turn indicators, the camera view instantly turns on and shows the full view of the side of your vehicle in the direction you intend to turn. No cyclist or object will be forgotten in the turning process.
Additional cameras
You can connect up to 4 additional cameras for the best monitoring. Check your pets or kids in the back of your motor home, pay attention to gray water disposal, check height clearance on narrow bridges, the possibilities are endless. There are plenty of extra cameras and other accessories available - check out the features and spec area below.
Compatible with any motor home
The HCS-T100 360° camera system can be installed in virtually any motorhome or camper because it is designed for universal use. The camera cables are very long enough for even very large motorhomes (front camera: 5m, side cameras: 10m, rear camera 18m).
Sold and installed by certified dealers
The HCS-T100 camera system must be installed by certified installers and requires special calibration tools and software. System calibration is not possible without these special tools.
