1 3
Monitor Audio

Monitor Audio Platinum In-Wall 3G, į sieną montuojama garso kolonėlė (montavimo gylis: 97.5 mm)

5,500.00 €

Monitor Audio Platinum In-Wall 3G, į sieną montuojama garso kolonėlė (montavimo gylis: 97.5 mm) yra užsakytas ir bus išsiųstas, kai tik bus sandėlyje.

Siuntimas ir pristatymas

Prekes visoje Lietuvoje (išskyrus Kuršių Neriją) pristato skubių siuntų tarnyba "Venipak" per 1-2 darbo dienas, tiesiai į namus ar darbovietę. Pristatymas yra nemokamas, jeigu prekių suma viršija 100€, kitu atveju taikomas 4,99€ pristatymo mokestis. Kurjeris pieš atveždamas prekes su Jumis susisieks Jūsų nurodytu telefono numeriu ir suderins pristatymo laiką.

"Platinum In-Wall 3G" yra "Monitor Audio"aukštos kokybės architektūrinė sieninė kolonėlė.

  • Rekomend. stiprintuvo galia: 150 – 600 W​.
  • Dažnių juosta: 41 Hz – >60 kHz​.
  • Jautrumas: 88 dB.
  • Varža: 4 Omai.

 

Platinum In-Wall 3G is Monitor Audio’s flagship high-performance, architectural, in-wall speaker. It is designed for use in high-end audio and movie systems, where accurate, clear and lifelike sound is required. With the minimum of room intrusion but with maximum scale and sonic impact.

Platinum In-Wall 3G can be installed either vertically or horizontally, which means it can be used on any channel within a system and is ideal for LCR applications and for seamless tonal accuracy within a theatre system.

Key Features
  • 1 x MPD III high-frequency transducer for a larger, clearer, and more lifelike sound
  • 1 x 4” RDT III mid-bass driver for incredible levels of clarity and scale
  • 2 x 6” RDT III bass drivers for exceptional weight and depth
  • Patented 'DCF' (Dynamic Coupling Filter) mechanism for more natural sound
  • Bespoke speaker terminals and footings
  • Underhung, edge-wound voice coils: greater driver efficiency and lifelike dynamics, less distortion
  • Rigid cabinet construction made from 25 mm MDF with steel back
  • Extensive internal bracing using thick MDF cross bracing techniques

 

SPECIFIKACIJOS

System Format

3-Way
Frequency Response, Free-Field (-6dB)​

41 Hz – >60 kHz​
Frequency Response, In-Room (-6dB)

27 Hz – >60 kHz​
Sensitivity (2.83 Vrms @ 1m, Free-Field)​​

88 dB
Nominal Impedance

4 Ohms
Minimum Impedance

4.1 Ohms​ @ 1.6 kHz​
Continuous Power Handling​ ​(RMS into 4 Ohms, Pink Noise with 6dB Crest Factor)

300 W​
Recommended Amplifier Power​ (RMS into 4 Ohm, Music Signal)

150 – 600 W​
Bass Alignment

Sealed
Port Tuning Frequency

N/A
Crossover Frequency

LF/MF: 825 Hz​
MF/HF: 3 kHz​
Drive Unit Complement

2 x 6” RDT III bass driver,
1 x 4” RDT III mid-range driver, 
1 x MPD III tweeter​​
External Dimensions (Including Grille and Terminals (H x W x D))

1207 x 332 x 105.5 mm (479/16 x 131/16 x 44/16”)
Cut-Out Dimensions

1175 x 300 x 97.5 mm (461/4 x 1113/16 x 313/16“)
Weight (each)

27.7 kg (61 lb)

 

INSTRUKCIJOS

User Manual (EN).

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Kategorijos

Monitor Audio

Monitor Audio Platinum In-Wall 3G, į sieną montuojama garso kolonėlė (montavimo gylis: 97.5 mm)

5,500.00 €

"Platinum In-Wall 3G" yra "Monitor Audio"aukštos kokybės architektūrinė sieninė kolonėlė.

 

APRAŠYMAS

Platinum In-Wall 3G is Monitor Audio’s flagship high-performance, architectural, in-wall speaker. It is designed for use in high-end audio and movie systems, where accurate, clear and lifelike sound is required. With the minimum of room intrusion but with maximum scale and sonic impact.

Platinum In-Wall 3G can be installed either vertically or horizontally, which means it can be used on any channel within a system and is ideal for LCR applications and for seamless tonal accuracy within a theatre system.

Key Features

  • 1 x MPD III high-frequency transducer for a larger, clearer, and more lifelike sound
  • 1 x 4” RDT III mid-bass driver for incredible levels of clarity and scale
  • 2 x 6” RDT III bass drivers for exceptional weight and depth
  • Patented 'DCF' (Dynamic Coupling Filter) mechanism for more natural sound
  • Bespoke speaker terminals and footings
  • Underhung, edge-wound voice coils: greater driver efficiency and lifelike dynamics, less distortion
  • Rigid cabinet construction made from 25 mm MDF with steel back
  • Extensive internal bracing using thick MDF cross bracing techniques

 

TECHNINIAI DUOMENYS

SPECIFIKACIJOS

System Format

3-Way

Frequency Response, Free-Field (-6dB)​

41 Hz – >60 kHz​

Frequency Response, In-Room (-6dB)

27 Hz – >60 kHz​

Sensitivity (2.83 Vrms @ 1m, Free-Field)​​

88 dB

Nominal Impedance

4 Ohms

Minimum Impedance

4.1 Ohms​ @ 1.6 kHz​

Continuous Power Handling​ ​(RMS into 4 Ohms, Pink Noise with 6dB Crest Factor)

300 W​

Recommended Amplifier Power​ (RMS into 4 Ohm, Music Signal)

150 – 600 W​

Bass Alignment

Sealed

Port Tuning Frequency

N/A

Crossover Frequency

LF/MF: 825 Hz​
MF/HF: 3 kHz​

Drive Unit Complement

2 x 6” RDT III bass driver,
1 x 4” RDT III mid-range driver, 
1 x MPD III tweeter​​

External Dimensions (Including Grille and Terminals (H x W x D))

1207 x 332 x 105.5 mm (479/16 x 131/16 x 44/16”)

Cut-Out Dimensions

1175 x 300 x 97.5 mm (461/4 x 1113/16 x 313/16“)

Weight (each)

27.7 kg (61 lb)

 

DOKUMENTAI

INSTRUKCIJOS

User Manual (EN).

Žiūrėti produktą

  • Gyvas pokalbis

    Ekspertų nuomonė ir patarimai

  • Pristatymas

    Lietuvoje per 1-2 d.d.

  • Darbo valandos

    Darbo dienomis 9.00 - 18.00

  • Atsiskaitymas

    Patogiausi būdai internetu
Atgal į viršų

"Platinum In-Wall 3G" yra "Monitor Audio"aukštos kokybės architektūrinė sieninė kolonėlė.

  • Rekomend. stiprintuvo galia: 150 – 600 W​.
  • Dažnių juosta: 41 Hz – >60 kHz​.
  • Jautrumas: 88 dB.
  • Varža: 4 Omai.

 

Platinum In-Wall 3G is Monitor Audio’s flagship high-performance, architectural, in-wall speaker. It is designed for use in high-end audio and movie systems, where accurate, clear and lifelike sound is required. With the minimum of room intrusion but with maximum scale and sonic impact.

Platinum In-Wall 3G can be installed either vertically or horizontally, which means it can be used on any channel within a system and is ideal for LCR applications and for seamless tonal accuracy within a theatre system.

Key Features
  • 1 x MPD III high-frequency transducer for a larger, clearer, and more lifelike sound
  • 1 x 4” RDT III mid-bass driver for incredible levels of clarity and scale
  • 2 x 6” RDT III bass drivers for exceptional weight and depth
  • Patented 'DCF' (Dynamic Coupling Filter) mechanism for more natural sound
  • Bespoke speaker terminals and footings
  • Underhung, edge-wound voice coils: greater driver efficiency and lifelike dynamics, less distortion
  • Rigid cabinet construction made from 25 mm MDF with steel back
  • Extensive internal bracing using thick MDF cross bracing techniques

 

SPECIFIKACIJOS

System Format

3-Way
Frequency Response, Free-Field (-6dB)​

41 Hz – >60 kHz​
Frequency Response, In-Room (-6dB)

27 Hz – >60 kHz​
Sensitivity (2.83 Vrms @ 1m, Free-Field)​​

88 dB
Nominal Impedance

4 Ohms
Minimum Impedance

4.1 Ohms​ @ 1.6 kHz​
Continuous Power Handling​ ​(RMS into 4 Ohms, Pink Noise with 6dB Crest Factor)

300 W​
Recommended Amplifier Power​ (RMS into 4 Ohm, Music Signal)

150 – 600 W​
Bass Alignment

Sealed
Port Tuning Frequency

N/A
Crossover Frequency

LF/MF: 825 Hz​
MF/HF: 3 kHz​
Drive Unit Complement

2 x 6” RDT III bass driver,
1 x 4” RDT III mid-range driver, 
1 x MPD III tweeter​​
External Dimensions (Including Grille and Terminals (H x W x D))

1207 x 332 x 105.5 mm (479/16 x 131/16 x 44/16”)
Cut-Out Dimensions

1175 x 300 x 97.5 mm (461/4 x 1113/16 x 313/16“)
Weight (each)

27.7 kg (61 lb)

 

INSTRUKCIJOS

User Manual (EN).