Alpine APF-X303VW, CAN- UART adapteris

€160.00 EUR

Alpine APF-X303VW, CAN- UART adapteris - prieš pirkdami pasiteiraukite ar šią prekę turime sandėlyje, jei neturime ji gali būti užsakyta ir atvykti per 2-21 dieną.

Pristatymas į namus nuo 4.99 €

Venipak kurjeriu per 1-2 darbo dienas.

Atsiimkite parduotuvėje 0 €

Armatūrininkų g. 1, Kaunas
Darbo laikas: I-V 9:00-18:00

APF-X303VW - tai naujausios kartos „Alpine“ sąsajos, skirtos „Volkswagen“ platformos automobiliams (įskaitant „Škoda“ ir „Seat“), kuriomis „Alpine“ navigacijos arba skaitmeninės medijos stotį galima sklandžiai prijungti prie automobilio elektronikos / CAN magistralės. Nors originalios įrangos pakeitimas neapribos funkcijų, vairuotojai įvertins galimybę išsaugoti tokias vizualizacijas ir valdiklius. 

  • VW platformos (MIB-PQ) automobiliams skirta „Plug-and-play“ laidų jungtis.
  • CAN magistralės sąsaja naujausios kartos transporto priemonėms.
  • Oro kondicionavimo ir (arba) šildymo nustatymų rodymas „Alpine“ ekrane.
  • Vairo nuotolinio valdymo pulto išlaikymas.
  • Daugiafunkcinio ekrano (MFD) palaikymas prietaisų skydelyje.
  • Parkavimo jutiklio rodymas ir galinės kameros jungtis.


The APF-X303VW is the latest generation of Alpine interfaces for Volkswagen platform vehicles (including Skoda and Seat) to connect an Alpine navigation or Digital Media Station seamlessly to your vehicle’s electronics / CAN-bus. While replacing the original equipment will not limit the functions, drivers will appreciate the ability to retain such visualisations and controls. The APF-X303VW is our solution that allows the customer to receive the same kind of images while operating the heater or air condition controls and also during parking. The interface will also support the VW radio display in the instrument cluster (MFD) and VW Steering Wheel Remote Control. It includes a complete plug-and-play wiring harness for adaptation to the original VW connectors.

  • Plug-and-play wiring harness for VW platform (MIB-PQ) vehicles
  • CAN-bus interface for latest generation of vehicles
  • Display of air condition / heater settings on Alpine screen
  • Steering wheel remote control retention
  • Support of Multi-Function Display (MFD) in instrument cluster
  • Parking sensor display and rear camera connectivity
  • Pre-flight Check for Camper Vans
  • Original hands-free microphone adaptation
  • Compatible with all Alpine Head Units featuring “Vehicle Data-Bus Interface Ready” functionality

 


Steering Wheel Button Compatibility

With this useful interface, your Alpine system gets connected to your steering wheel control buttons. This means you do not lose this convenient feature when upgrading to Alpine and you will have control over volume, phone (accept / decline calls), audio track forward/backward and many other commands. You can even activate Siri voice control if you have an iPhone connected to the system.

Multi-Function Display (MFD) Support

The APF-X303VW supports the Multi-Function Display (MFD) in the instrument cluster. When connected to an Alpine Head Unit, the MFD will display radio station names, song titles and artist information, caller names and other useful information.

Parking Sensor & Camera Display

If your car is equipped with original parking sensors, you can continue to use this convenient feature after installing an Alpine Head Unit. The parking sensor system connects to your Alpine screen via the APF-X303VW, showing convenient distance indications. If your car has a rear-view camera installed 2), you can of course show the camera image on the Alpine screen as well – in split-screen with the parking sensor display or in full-screen.

Pre-Flight Check for Camper vans

Most damages to camper vans occur, because the vehicle was not fully prepared for the road. Alpine’s on-screen Pre-Flight Check can be fully customized to match your vehicle and reminds you before you start driving, to ensure that the gas is shut off, all tables and doors are secured, satellite antennas are retracted, etc. and it is safe to drive.

Air Condition & Heater Settings Display

Compatible with many Alpine Head Units

Air Condition & Heater Settings Display

Get visual feedback for the selected interior temperature of driver and co-driver, air condition status, seat heating level, selected air vents and more. This screen will automatically appear for a few seconds on the Alpine screen if any of the named settings are changed.

Compatible with many Alpine Head Units

The APF-X303VW is compatible with all Alpine Head Units and navigation systems that are “Vehicle Data-Bus Interface Ready” (with exception of iLX-W690D).

SPECIFIKACIJOS

General:

  • Compatible with VW platforms (MIB / MIB2 - Seat, Skoda and VW)
  • Steering wheel remote control interface with CAN to analogue conversion, retention of original car menu, addition of HVAC (Heating, Ventilation and Air Conditioning) and OPS (Optical Parking Sensor) screens and SIRI support.
  • Some vehicle settings or features are not supported, among them: Traffic Sign Recognition, Active Information Display

 

Compatible Cars

Maker* Model Model year Seat Alhambra (7N) 06/2015 - 01/2022 Seat Arona (KJ) 11/2017 - 06/2021 Seat Ateca (5FP, KH7) 04/2016 - 2022 Seat Ibiza V (6F/KJ) 06/2017 - 03/2021 Seat Mii (AA) 05/2015 - 02/2021 Seat Leon (5F) 11/2012 - 01/2020 Seat Toledo (NH) 2016 - 08/2018 Skoda Citigo (AA) 05/2017 - 06/2019 Skoda Fabia III (5J) 09/2014 - 05/2021 Skoda Karoq (NU7) 03/2017 - 11/2021 Skoda Kodiaq (NS7) 03/2017 - 06/2021 Skoda Octavia III (5E) 02/2013 - 01/2020 Skoda Rapid (NH) 04/2015 - 02/2019 Skoda Superb (3V) 03/2015 - 05/2019 Skoda Yeti (5L) 2016 - 07/2017 Volkswagen Amarok (2H) 09/2016 - 07/2020 Volkswagen Arteon (3H) 06/2017 - 06/2020 Volkswagen Beetle (16) 06/2016 - 03/2018 Volkswagen Caddy IV (DU) 06/2015 - 09/2020 Volkswagen Crafter II (SY/SZ) 03/2017 - 2022 Volkswagen Golf VII (AU) 08/2012 - 05/2020 Volkswagen Passat B8 (3G) 07/2014 - 05/2019 Volkswagen Polo V (6C) 04/2014 - 08/2017 Volkswagen Polo VI (AW) 11/2017 - 05/2021 Volkswagen Sharan II (7N) 07/2015 - 10/2021 Volkswagen Sportsvan (AU) 02/2014 - 06/2020 Volkswagen T6.1 (7H/7J) 11/2019 - 2022 Volkswagen T-Roc (A1) 11/2017 - 10/2021 Volkswagen Tiguan II (5N) 05/2016 - 05/2021 Volkswagen Touran (5T) 09/2015 - 2022 Volkswagen UP! (AA) 07/2016 - 2022

Please Note:

  • Only for vehicles with MIB/MIB2 radio platform (radios with CAR button). The interface is not compatible with the emergency call system, electric or hybrid vehicles and vehicles with Active Info Display (AID) or sound systems. Please note that vehicle menus may be lost (e.g. traffic sign recognition etc.). A few other functions or settings are retained but may be controlled in a different way. Not compatible with original OEM sound systems.

 

INSTRUKCIJOS

User Manual

 

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
Alpine APF-X303VW, CAN- UART adapteris
Alpine

Alpine APF-X303VW, CAN- UART adapteris

€160.00 EUR

APF-X303VW - tai naujausios kartos „Alpine“ sąsajos, skirtos „Volkswagen“ platformos automobiliams (įskaitant „Škoda“ ir „Seat“), kuriomis „Alpine“ navigacijos arba skaitmeninės medijos stotį galima sklandžiai prijungti prie automobilio elektronikos / CAN magistralės. Nors originalios įrangos pakeitimas neapribos funkcijų, vairuotojai įvertins galimybę išsaugoti tokias vizualizacijas ir valdiklius. 

APRAŠYMAS


The APF-X303VW is the latest generation of Alpine interfaces for Volkswagen platform vehicles (including Skoda and Seat) to connect an Alpine navigation or Digital Media Station seamlessly to your vehicle’s electronics / CAN-bus. While replacing the original equipment will not limit the functions, drivers will appreciate the ability to retain such visualisations and controls. The APF-X303VW is our solution that allows the customer to receive the same kind of images while operating the heater or air condition controls and also during parking. The interface will also support the VW radio display in the instrument cluster (MFD) and VW Steering Wheel Remote Control. It includes a complete plug-and-play wiring harness for adaptation to the original VW connectors.

  • Plug-and-play wiring harness for VW platform (MIB-PQ) vehicles
  • CAN-bus interface for latest generation of vehicles
  • Display of air condition / heater settings on Alpine screen
  • Steering wheel remote control retention
  • Support of Multi-Function Display (MFD) in instrument cluster
  • Parking sensor display and rear camera connectivity
  • Pre-flight Check for Camper Vans
  • Original hands-free microphone adaptation
  • Compatible with all Alpine Head Units featuring “Vehicle Data-Bus Interface Ready” functionality

 


Steering Wheel Button Compatibility

With this useful interface, your Alpine system gets connected to your steering wheel control buttons. This means you do not lose this convenient feature when upgrading to Alpine and you will have control over volume, phone (accept / decline calls), audio track forward/backward and many other commands. You can even activate Siri voice control if you have an iPhone connected to the system.

Multi-Function Display (MFD) Support

The APF-X303VW supports the Multi-Function Display (MFD) in the instrument cluster. When connected to an Alpine Head Unit, the MFD will display radio station names, song titles and artist information, caller names and other useful information.

Parking Sensor & Camera Display

If your car is equipped with original parking sensors, you can continue to use this convenient feature after installing an Alpine Head Unit. The parking sensor system connects to your Alpine screen via the APF-X303VW, showing convenient distance indications. If your car has a rear-view camera installed 2), you can of course show the camera image on the Alpine screen as well – in split-screen with the parking sensor display or in full-screen.

Pre-Flight Check for Camper vans

Most damages to camper vans occur, because the vehicle was not fully prepared for the road. Alpine’s on-screen Pre-Flight Check can be fully customized to match your vehicle and reminds you before you start driving, to ensure that the gas is shut off, all tables and doors are secured, satellite antennas are retracted, etc. and it is safe to drive.

Air Condition & Heater Settings Display

Compatible with many Alpine Head Units

Air Condition & Heater Settings Display

Get visual feedback for the selected interior temperature of driver and co-driver, air condition status, seat heating level, selected air vents and more. This screen will automatically appear for a few seconds on the Alpine screen if any of the named settings are changed.

Compatible with many Alpine Head Units

The APF-X303VW is compatible with all Alpine Head Units and navigation systems that are “Vehicle Data-Bus Interface Ready” (with exception of iLX-W690D).

TECHNINIAI DUOMENYS

SPECIFIKACIJOS

General:

  • Compatible with VW platforms (MIB / MIB2 - Seat, Skoda and VW)
  • Steering wheel remote control interface with CAN to analogue conversion, retention of original car menu, addition of HVAC (Heating, Ventilation and Air Conditioning) and OPS (Optical Parking Sensor) screens and SIRI support.
  • Some vehicle settings or features are not supported, among them: Traffic Sign Recognition, Active Information Display

 

Compatible Cars

Maker*
Model
Model year
Seat
Alhambra (7N)
06/2015 - 01/2022
Seat
Arona (KJ)
11/2017 - 06/2021
Seat
Ateca (5FP, KH7)
04/2016 - 2022
Seat
Ibiza V (6F/KJ)
06/2017 - 03/2021
Seat
Mii (AA)
05/2015 - 02/2021
Seat
Leon (5F)
11/2012 - 01/2020
Seat
Toledo (NH)
2016 - 08/2018
Skoda
Citigo (AA)
05/2017 - 06/2019
Skoda
Fabia III (5J)
09/2014 - 05/2021
Skoda
Karoq (NU7)
03/2017 - 11/2021
Skoda
Kodiaq (NS7)
03/2017 - 06/2021
Skoda
Octavia III (5E)
02/2013 - 01/2020
Skoda
Rapid (NH)
04/2015 - 02/2019
Skoda
Superb (3V)
03/2015 - 05/2019
Skoda
Yeti (5L)
2016 - 07/2017
Volkswagen
Amarok (2H)
09/2016 - 07/2020
Volkswagen
Arteon (3H)
06/2017 - 06/2020
Volkswagen
Beetle (16)
06/2016 - 03/2018
Volkswagen
Caddy IV (DU)
06/2015 - 09/2020
Volkswagen
Crafter II (SY/SZ)
03/2017 - 2022
Volkswagen
Golf VII (AU)
08/2012 - 05/2020
Volkswagen
Passat B8 (3G)
07/2014 - 05/2019
Volkswagen
Polo V (6C)
04/2014 - 08/2017
Volkswagen
Polo VI (AW)
11/2017 - 05/2021
Volkswagen
Sharan II (7N)
07/2015 - 10/2021
Volkswagen
Sportsvan (AU)
02/2014 - 06/2020
Volkswagen
T6.1 (7H/7J)
11/2019 - 2022
Volkswagen
T-Roc (A1)
11/2017 - 10/2021
Volkswagen
Tiguan II (5N)
05/2016 - 05/2021
Volkswagen
Touran (5T)
09/2015 - 2022
Volkswagen
UP! (AA)
07/2016 - 2022

Please Note:

  • Only for vehicles with MIB/MIB2 radio platform (radios with CAR button). The interface is not compatible with the emergency call system, electric or hybrid vehicles and vehicles with Active Info Display (AID) or sound systems. Please note that vehicle menus may be lost (e.g. traffic sign recognition etc.). A few other functions or settings are retained but may be controlled in a different way. Not compatible with original OEM sound systems.

 

DOKUMENTAI

INSTRUKCIJOS

User Manual

 

Žiūrėti produktą

APF-X303VW - tai naujausios kartos „Alpine“ sąsajos, skirtos „Volkswagen“ platformos automobiliams (įskaitant „Škoda“ ir „Seat“), kuriomis „Alpine“ navigacijos arba skaitmeninės medijos stotį galima sklandžiai prijungti prie automobilio elektronikos / CAN magistralės. Nors originalios įrangos pakeitimas neapribos funkcijų, vairuotojai įvertins galimybę išsaugoti tokias vizualizacijas ir valdiklius. 

  • VW platformos (MIB-PQ) automobiliams skirta „Plug-and-play“ laidų jungtis.
  • CAN magistralės sąsaja naujausios kartos transporto priemonėms.
  • Oro kondicionavimo ir (arba) šildymo nustatymų rodymas „Alpine“ ekrane.
  • Vairo nuotolinio valdymo pulto išlaikymas.
  • Daugiafunkcinio ekrano (MFD) palaikymas prietaisų skydelyje.
  • Parkavimo jutiklio rodymas ir galinės kameros jungtis.


The APF-X303VW is the latest generation of Alpine interfaces for Volkswagen platform vehicles (including Skoda and Seat) to connect an Alpine navigation or Digital Media Station seamlessly to your vehicle’s electronics / CAN-bus. While replacing the original equipment will not limit the functions, drivers will appreciate the ability to retain such visualisations and controls. The APF-X303VW is our solution that allows the customer to receive the same kind of images while operating the heater or air condition controls and also during parking. The interface will also support the VW radio display in the instrument cluster (MFD) and VW Steering Wheel Remote Control. It includes a complete plug-and-play wiring harness for adaptation to the original VW connectors.

  • Plug-and-play wiring harness for VW platform (MIB-PQ) vehicles
  • CAN-bus interface for latest generation of vehicles
  • Display of air condition / heater settings on Alpine screen
  • Steering wheel remote control retention
  • Support of Multi-Function Display (MFD) in instrument cluster
  • Parking sensor display and rear camera connectivity
  • Pre-flight Check for Camper Vans
  • Original hands-free microphone adaptation
  • Compatible with all Alpine Head Units featuring “Vehicle Data-Bus Interface Ready” functionality

 


Steering Wheel Button Compatibility

With this useful interface, your Alpine system gets connected to your steering wheel control buttons. This means you do not lose this convenient feature when upgrading to Alpine and you will have control over volume, phone (accept / decline calls), audio track forward/backward and many other commands. You can even activate Siri voice control if you have an iPhone connected to the system.

Multi-Function Display (MFD) Support

The APF-X303VW supports the Multi-Function Display (MFD) in the instrument cluster. When connected to an Alpine Head Unit, the MFD will display radio station names, song titles and artist information, caller names and other useful information.

Parking Sensor & Camera Display

If your car is equipped with original parking sensors, you can continue to use this convenient feature after installing an Alpine Head Unit. The parking sensor system connects to your Alpine screen via the APF-X303VW, showing convenient distance indications. If your car has a rear-view camera installed 2), you can of course show the camera image on the Alpine screen as well – in split-screen with the parking sensor display or in full-screen.

Pre-Flight Check for Camper vans

Most damages to camper vans occur, because the vehicle was not fully prepared for the road. Alpine’s on-screen Pre-Flight Check can be fully customized to match your vehicle and reminds you before you start driving, to ensure that the gas is shut off, all tables and doors are secured, satellite antennas are retracted, etc. and it is safe to drive.

Air Condition & Heater Settings Display

Compatible with many Alpine Head Units

Air Condition & Heater Settings Display

Get visual feedback for the selected interior temperature of driver and co-driver, air condition status, seat heating level, selected air vents and more. This screen will automatically appear for a few seconds on the Alpine screen if any of the named settings are changed.

Compatible with many Alpine Head Units

The APF-X303VW is compatible with all Alpine Head Units and navigation systems that are “Vehicle Data-Bus Interface Ready” (with exception of iLX-W690D).

SPECIFIKACIJOS

General:

  • Compatible with VW platforms (MIB / MIB2 - Seat, Skoda and VW)
  • Steering wheel remote control interface with CAN to analogue conversion, retention of original car menu, addition of HVAC (Heating, Ventilation and Air Conditioning) and OPS (Optical Parking Sensor) screens and SIRI support.
  • Some vehicle settings or features are not supported, among them: Traffic Sign Recognition, Active Information Display

 

Compatible Cars

Maker* Model Model year Seat Alhambra (7N) 06/2015 - 01/2022 Seat Arona (KJ) 11/2017 - 06/2021 Seat Ateca (5FP, KH7) 04/2016 - 2022 Seat Ibiza V (6F/KJ) 06/2017 - 03/2021 Seat Mii (AA) 05/2015 - 02/2021 Seat Leon (5F) 11/2012 - 01/2020 Seat Toledo (NH) 2016 - 08/2018 Skoda Citigo (AA) 05/2017 - 06/2019 Skoda Fabia III (5J) 09/2014 - 05/2021 Skoda Karoq (NU7) 03/2017 - 11/2021 Skoda Kodiaq (NS7) 03/2017 - 06/2021 Skoda Octavia III (5E) 02/2013 - 01/2020 Skoda Rapid (NH) 04/2015 - 02/2019 Skoda Superb (3V) 03/2015 - 05/2019 Skoda Yeti (5L) 2016 - 07/2017 Volkswagen Amarok (2H) 09/2016 - 07/2020 Volkswagen Arteon (3H) 06/2017 - 06/2020 Volkswagen Beetle (16) 06/2016 - 03/2018 Volkswagen Caddy IV (DU) 06/2015 - 09/2020 Volkswagen Crafter II (SY/SZ) 03/2017 - 2022 Volkswagen Golf VII (AU) 08/2012 - 05/2020 Volkswagen Passat B8 (3G) 07/2014 - 05/2019 Volkswagen Polo V (6C) 04/2014 - 08/2017 Volkswagen Polo VI (AW) 11/2017 - 05/2021 Volkswagen Sharan II (7N) 07/2015 - 10/2021 Volkswagen Sportsvan (AU) 02/2014 - 06/2020 Volkswagen T6.1 (7H/7J) 11/2019 - 2022 Volkswagen T-Roc (A1) 11/2017 - 10/2021 Volkswagen Tiguan II (5N) 05/2016 - 05/2021 Volkswagen Touran (5T) 09/2015 - 2022 Volkswagen UP! (AA) 07/2016 - 2022

Please Note:

  • Only for vehicles with MIB/MIB2 radio platform (radios with CAR button). The interface is not compatible with the emergency call system, electric or hybrid vehicles and vehicles with Active Info Display (AID) or sound systems. Please note that vehicle menus may be lost (e.g. traffic sign recognition etc.). A few other functions or settings are retained but may be controlled in a different way. Not compatible with original OEM sound systems.

 

INSTRUKCIJOS

User Manual