BRAX MATRIX ML10 SUB, automobilinis žemų dažnių garsiakalbis

1,200.00 €

BRAX MATRIX ML10 SUB, automobilinis žemų dažnių garsiakalbis yra užsakytas ir bus išsiųstas, kai tik bus sandėlyje.


Siuntimas ir pristatymas

Prekes visoje Lietuvoje (išskyrus Kuršių Neriją) pristato skubių siuntų tarnyba "Venipak" per 1-2 darbo dienas, tiesiai į namus ar darbovietę. Pristatymas yra nemokamas, jeigu prekių suma viršija 100€, kitu atveju taikomas 4,99€ pristatymo mokestis. Kurjeris pieš atveždamas prekes su Jumis susisieks Jūsų nurodytu telefono numeriu ir suderins pristatymo laiką.

Legendinė BRAX MATRIX garsiakalbių serija, kuri jau daugelį metų yra moderniausios garso kokybės sinonimas, dabar papildyta modeliu ML8 SUB.

  • Rekomend. stiprintuvo galia: 600W.
  • Rezonansinis dažnis: 34 Hz.
  • Varža: 2 x 2 Ω.

BRAX MATRIX ML10 SUB

The legendary BRAX MATRIX loudspeaker series – since many years the synonym for state-of-the-art sound quality is now completed with the ML10 SUB. Developed and manufactured just as uncompromisingly as all BRAX loudspeakers, this subwoofer is the acoustic benchmark against which it is to be measured.

Perfection meets maximum flexibility
Thanks to the use of the new 2 x 2 Ohms dual voice coil, the ML10 SUB enables most flexible connection configurations and therefore allows to achieve an extremely clean and maximally controlled bass reproduction easier than ever before. The separate voice coils with the four massive connection terminals allow three different configurations – 1 x 4 Ohms, 2 x 2 Ohms or 1 x 1 Ohm with an extraordinary maximum power handling up to 1,200 Watts.
 
MicroSphere – the perfect synthesis of weight and stiffness
One of the secrets of the BRAX ML10 SUB lies in its unique diaphragm, more precisely in its "MicroSphere" coating. It gives the hand-scooped cone the highest level of acoustic precision for an incomparable reproduction. This patented technology embeds ceramic hollow spheres with a diameter of solely 75 µm in a polyamide layer that is applied to the cone. That special coating not only improves the stiffness, but the cones inner damping as well. However, these stabilizing measures do not increase the moving mass. Compared to other subs the cone is even lighter, which not only leads to a lower total Q factor but also further improves the impulse response.

“Engineering at its best” in harmony with timeless elegance
Each BRAX product impresses with a puristic design and perfect workmanship in every detail - and of course the BRAX ML10 SUB is no exception! Its extremely linear magnet drive with precisely machined pole plates for lowest level of distortion, the large, multi-ventilated voice coil for maximum electrical power handling and the aerodynamically shaped and stable die-cast basket warrant for uncompromising bass reproduction at the very highest level.  
Of course, the ML10 SUB comes in a noble wooden box with its own serial number, which is recorded in a service database.

Features

  • Exceptional stiff hand-scooped paper cone with unique “MicroSphere” coating consisting of micro ceramic hollow spheres embedded in a polymer layer offers best possible impulse response
  • Specially shaped rubber surround for long linear cone excursion
  • 2 x 2 Ohms dual voice coil with exceptional winding height for high linear excursion and lowest possible distortion
  • Optimized voice coil ventilation through large, mesh-protected holes in T-yoke and basket for almost zero compression effects and maximum heat dissipation
  • Specially developed, aerodynamically optimized and extremely solid aluminum diecast basket
  • Extremely powerful and precisely machined magnet system for highest magnetic flux linearity
  • Massive push-terminals for large wire gauge

    SPECIFIKACIJOS

    Power RMS / max.   600 / 1200 Watts
    Impedance  Z 2 x 2 Ω
    DC resistance  Re 2 x 1.9 Ω
    Resonance frequency  Fs 34 Hz
    Mechanical Q factor  Qms 7.78
    Electrical Q factor  Qes 0,55
    Total Q factor Qts 0.51
    Compliance Cms 265 µm/N
    Equivalent air volume Vas 46 L
    Force factor  B*I 11.30 Tm
    Efficiency 1 W / 1 m SPL 87 dB
    Cone area  Sd 346 cm²
    Moving mass  Mms 83 g
    Cone material   Paper cone with “MicroSphere” coating consisting of micro ceramic hollow spheres embedded in a polymer layer
    Mechanical resistance  Rms 2,26 kg/s
    Voice coil diameter ø 65 mm / 2.6"
    Voice coil winding height   33 mm / 1.3"
    Max. linear excursion  Xmax +/- 12.5 mm
    Outer diameter ø 275 mm / 10.8"
    Installation diameter ø 235 mm / 9.3"
    Installation depth   114 mm / 4.5"
         
    Recommended enclosure volumes    
    Sealed box    
    Net volume   28 L
    Lower limiting frequency (-3dB)   43 Hz
    DSP setting highpass filter   Frequency: 32 Hz
    Characteristic: “Self-define”
    Q-Factor: 1.0


     

    INSTRUKCIJOS

    User Manual (EN).

     

    BRAX MATRIX ML10 SUB, automobilinis žemų dažnių garsiakalbis
    Brax

    BRAX MATRIX ML10 SUB, automobilinis žemų dažnių garsiakalbis

    1,200.00 €

    Legendinė BRAX MATRIX garsiakalbių serija, kuri jau daugelį metų yra moderniausios garso kokybės sinonimas, dabar papildyta modeliu ML8 SUB.

    APRAŠYMAS

    BRAX MATRIX ML10 SUB

    The legendary BRAX MATRIX loudspeaker series – since many years the synonym for state-of-the-art sound quality is now completed with the ML10 SUB. Developed and manufactured just as uncompromisingly as all BRAX loudspeakers, this subwoofer is the acoustic benchmark against which it is to be measured.

    Perfection meets maximum flexibility
    Thanks to the use of the new 2 x 2 Ohms dual voice coil, the ML10 SUB enables most flexible connection configurations and therefore allows to achieve an extremely clean and maximally controlled bass reproduction easier than ever before. The separate voice coils with the four massive connection terminals allow three different configurations – 1 x 4 Ohms, 2 x 2 Ohms or 1 x 1 Ohm with an extraordinary maximum power handling up to 1,200 Watts.
     
    MicroSphere – the perfect synthesis of weight and stiffness
    One of the secrets of the BRAX ML10 SUB lies in its unique diaphragm, more precisely in its "MicroSphere" coating. It gives the hand-scooped cone the highest level of acoustic precision for an incomparable reproduction. This patented technology embeds ceramic hollow spheres with a diameter of solely 75 µm in a polyamide layer that is applied to the cone. That special coating not only improves the stiffness, but the cones inner damping as well. However, these stabilizing measures do not increase the moving mass. Compared to other subs the cone is even lighter, which not only leads to a lower total Q factor but also further improves the impulse response.

    “Engineering at its best” in harmony with timeless elegance
    Each BRAX product impresses with a puristic design and perfect workmanship in every detail - and of course the BRAX ML10 SUB is no exception! Its extremely linear magnet drive with precisely machined pole plates for lowest level of distortion, the large, multi-ventilated voice coil for maximum electrical power handling and the aerodynamically shaped and stable die-cast basket warrant for uncompromising bass reproduction at the very highest level.  
    Of course, the ML10 SUB comes in a noble wooden box with its own serial number, which is recorded in a service database.

    Features

    • Exceptional stiff hand-scooped paper cone with unique “MicroSphere” coating consisting of micro ceramic hollow spheres embedded in a polymer layer offers best possible impulse response
    • Specially shaped rubber surround for long linear cone excursion
    • 2 x 2 Ohms dual voice coil with exceptional winding height for high linear excursion and lowest possible distortion
    • Optimized voice coil ventilation through large, mesh-protected holes in T-yoke and basket for almost zero compression effects and maximum heat dissipation
    • Specially developed, aerodynamically optimized and extremely solid aluminum diecast basket
    • Extremely powerful and precisely machined magnet system for highest magnetic flux linearity
    • Massive push-terminals for large wire gauge

      TECHNINIAI DUOMENYS

      SPECIFIKACIJOS

      Power RMS / max.   600 / 1200 Watts
      Impedance  Z 2 x 2 Ω
      DC resistance  Re 2 x 1.9 Ω
      Resonance frequency  Fs 34 Hz
      Mechanical Q factor  Qms 7.78
      Electrical Q factor  Qes 0,55
      Total Q factor Qts 0.51
      Compliance Cms 265 µm/N
      Equivalent air volume Vas 46 L
      Force factor  B*I 11.30 Tm
      Efficiency 1 W / 1 m SPL 87 dB
      Cone area  Sd 346 cm²
      Moving mass  Mms 83 g
      Cone material   Paper cone with “MicroSphere” coating consisting of micro ceramic hollow spheres embedded in a polymer layer
      Mechanical resistance  Rms 2,26 kg/s
      Voice coil diameter ø 65 mm / 2.6"
      Voice coil winding height   33 mm / 1.3"
      Max. linear excursion  Xmax +/- 12.5 mm
      Outer diameter ø 275 mm / 10.8"
      Installation diameter ø 235 mm / 9.3"
      Installation depth   114 mm / 4.5"
           
      Recommended enclosure volumes    
      Sealed box    
      Net volume   28 L
      Lower limiting frequency (-3dB)   43 Hz
      DSP setting highpass filter   Frequency: 32 Hz
      Characteristic: “Self-define”
      Q-Factor: 1.0


       

      DOKUMENTAI

      INSTRUKCIJOS

      User Manual (EN).

       

      Žiūrėti produktą

      Legendinė BRAX MATRIX garsiakalbių serija, kuri jau daugelį metų yra moderniausios garso kokybės sinonimas, dabar papildyta modeliu ML8 SUB.

      • Rekomend. stiprintuvo galia: 600W.
      • Rezonansinis dažnis: 34 Hz.
      • Varža: 2 x 2 Ω.

      BRAX MATRIX ML10 SUB

      The legendary BRAX MATRIX loudspeaker series – since many years the synonym for state-of-the-art sound quality is now completed with the ML10 SUB. Developed and manufactured just as uncompromisingly as all BRAX loudspeakers, this subwoofer is the acoustic benchmark against which it is to be measured.

      Perfection meets maximum flexibility
      Thanks to the use of the new 2 x 2 Ohms dual voice coil, the ML10 SUB enables most flexible connection configurations and therefore allows to achieve an extremely clean and maximally controlled bass reproduction easier than ever before. The separate voice coils with the four massive connection terminals allow three different configurations – 1 x 4 Ohms, 2 x 2 Ohms or 1 x 1 Ohm with an extraordinary maximum power handling up to 1,200 Watts.
       
      MicroSphere – the perfect synthesis of weight and stiffness
      One of the secrets of the BRAX ML10 SUB lies in its unique diaphragm, more precisely in its "MicroSphere" coating. It gives the hand-scooped cone the highest level of acoustic precision for an incomparable reproduction. This patented technology embeds ceramic hollow spheres with a diameter of solely 75 µm in a polyamide layer that is applied to the cone. That special coating not only improves the stiffness, but the cones inner damping as well. However, these stabilizing measures do not increase the moving mass. Compared to other subs the cone is even lighter, which not only leads to a lower total Q factor but also further improves the impulse response.

      “Engineering at its best” in harmony with timeless elegance
      Each BRAX product impresses with a puristic design and perfect workmanship in every detail - and of course the BRAX ML10 SUB is no exception! Its extremely linear magnet drive with precisely machined pole plates for lowest level of distortion, the large, multi-ventilated voice coil for maximum electrical power handling and the aerodynamically shaped and stable die-cast basket warrant for uncompromising bass reproduction at the very highest level.  
      Of course, the ML10 SUB comes in a noble wooden box with its own serial number, which is recorded in a service database.

      Features

      • Exceptional stiff hand-scooped paper cone with unique “MicroSphere” coating consisting of micro ceramic hollow spheres embedded in a polymer layer offers best possible impulse response
      • Specially shaped rubber surround for long linear cone excursion
      • 2 x 2 Ohms dual voice coil with exceptional winding height for high linear excursion and lowest possible distortion
      • Optimized voice coil ventilation through large, mesh-protected holes in T-yoke and basket for almost zero compression effects and maximum heat dissipation
      • Specially developed, aerodynamically optimized and extremely solid aluminum diecast basket
      • Extremely powerful and precisely machined magnet system for highest magnetic flux linearity
      • Massive push-terminals for large wire gauge

        SPECIFIKACIJOS

        Power RMS / max.   600 / 1200 Watts
        Impedance  Z 2 x 2 Ω
        DC resistance  Re 2 x 1.9 Ω
        Resonance frequency  Fs 34 Hz
        Mechanical Q factor  Qms 7.78
        Electrical Q factor  Qes 0,55
        Total Q factor Qts 0.51
        Compliance Cms 265 µm/N
        Equivalent air volume Vas 46 L
        Force factor  B*I 11.30 Tm
        Efficiency 1 W / 1 m SPL 87 dB
        Cone area  Sd 346 cm²
        Moving mass  Mms 83 g
        Cone material   Paper cone with “MicroSphere” coating consisting of micro ceramic hollow spheres embedded in a polymer layer
        Mechanical resistance  Rms 2,26 kg/s
        Voice coil diameter ø 65 mm / 2.6"
        Voice coil winding height   33 mm / 1.3"
        Max. linear excursion  Xmax +/- 12.5 mm
        Outer diameter ø 275 mm / 10.8"
        Installation diameter ø 235 mm / 9.3"
        Installation depth   114 mm / 4.5"
             
        Recommended enclosure volumes    
        Sealed box    
        Net volume   28 L
        Lower limiting frequency (-3dB)   43 Hz
        DSP setting highpass filter   Frequency: 32 Hz
        Characteristic: “Self-define”
        Q-Factor: 1.0


         

        INSTRUKCIJOS

        User Manual (EN).