1 3
Brax

BRAX MATRIX ML8 SUB, automobilinis žemų dažnių garsiakalbis

1,120.00 €

BRAX MATRIX ML8 SUB, automobilinis žemų dažnių garsiakalbis yra užsakytas ir bus išsiųstas, kai tik bus sandėlyje.

Siuntimas ir pristatymas

Prekes visoje Lietuvoje (išskyrus Kuršių Neriją) pristato skubių siuntų tarnyba "Venipak" per 1-2 darbo dienas, tiesiai į namus ar darbovietę. Pristatymas yra nemokamas, jeigu prekių suma viršija 100€, kitu atveju taikomas 4,99€ pristatymo mokestis. Kurjeris pieš atveždamas prekes su Jumis susisieks Jūsų nurodytu telefono numeriu ir suderins pristatymo laiką.

Legendinė BRAX MATRIX garsiakalbių serija, kuri jau daugelį metų yra moderniausios garso kokybės sinonimas, dabar papildyta modeliu ML8 SUB.

  • Rekomend. stiprintuvo galia: 400W.
  • Rezonansinis dažnis: 32 Hz.
  • Varža: 2 x 2 Ω.

BRAX MATRIX ML8 SUB

The legendary BRAX MATRIX loudspeaker series – since many years the synonym for state-of-the-art sound quality – is now expanded with the ML8 SUB. Just as uncompromisingly developed and manufactured as all BRAX loudspeakers, it pursues the goal of acoustic perfection.

Precision in perfection!

For years, our BRAX subwoofer has been the benchmark for precision and unconditionally controlled bass reproduction. It was even more demanding to create a BRAX subwoofer that uncompromisingly reproduces deep bass even in smallest possible enclosures. Each component of this exceptional driver is not only made for dynamics and perfect tonality, but is also designed to convert even huge loads of amplifier power into sound pressure without compression.

MicroSphere – a material for two opposing requirements

The demand for maximum cone stiffness in combination with highest innner damping seems like the attempt to square the circle – actually the unique "MicroSphere" coating, where ceramic micro-hollow spheres with a diameter of only 75 microns are embedded in a polymer layer and applied to the diaphragm makes the impossible possible. It warrants for maximum acoustic precision and unrivaled sound quality. 

Timeless elegance

The clear, reduced design language is the distinguishing feature of every BRAX product – the ML8 SUB follows this philosophy unconditionally. The combination of the finest materials is underlined once more by the optionally available MR8 stainless steel ring, which can be used as a mounting ring or to fix the grille, depending on the installation position. Of course, the ML8 SUB comes in a noble wooden box with its own serial number, which is recorded in a service database.

Features
  • Exceptional stiff hand-scooped paper cone with unique “MicroSphere” coating consisting of micro ceramic hollow spheres embedded in a polymer layer offers best possible impulse response
  • Specially shaped rubber surround for long linear cone excursion
  • 2 x 2 Ohms dual voice coil with exceptional winding height for high linear excursion and lowest possible distortion
  • Optimized voice coil ventilation through large, mesh-protected holes in T-yoke and basket for almost zero compression effects and maximum heat dissipation
  • Specially developed, aerodynamically optimized and extremely solid aluminum diecast basket
  • Extremely powerful and precisely machined magnet system for highest magnetic flux linearity
  • Massive push-terminals for large wire gauge

      SPECIFIKACIJOS

      Power RMS / max.   400 / 800 Watt
      Impedance  Z 2 x 2 Ω
      DC resistance  Re 2 x 1.9 Ω
      Resonance frequency  Fs 32 Hz
      Mechanical Q factor  Qms 9.63
      Electrical Q factor  Qes 0.60
      Total Q factor Qts 0.56
      Compliance Cms 323 µm/N
      Equivalent air volume Vas 22 L
      Force factor  B*I 10.3 Tm
      Efficiency 1 W / 1 m SPL 85 dB
      Cone area  Sd 219 cm²
      Moving mass  Mms 83 g
      Cone material   Paper cone with “MicroSphere” coating consisting of micro ceramic hollow spheres embedded in a polymer layer
      Mechanical resistance  Rms 1.67 kg/s
      Voice coil diameter ø 50 mm / 2.0"
      Voice coil winding height   26.4 mm / 1.0"
      Max. linear excursion  Xmax +/- 9,2 mm
      Outer diameter ø 222 mm / 8.7"
      Installation diameter ø 191 mm / 7.5"
      Installation depth   95.6 mm / 3.8"
             
      Recommended enclosure volumes      
      Sealed box   Optimal enclosure size Minimal enclosure size
      Net volume   17 L 10 L
      Lower limiting frequency (-3dB)   43 Hz 48 Hz
      DSP setting highpass filter   Frequency: 32 Hz
      Characteristic: “Self-define”
      Q-Factor: 1.0      		 Frequenz: 35 Hz
      Charakteristik: “Self-define”
      Q-Faktor: 1,0
             
      Vented box      
      Net volume   - 
      Port diameter ø - 
      Port area   - 
      Port length   - 
      Port tuning frequency Fb - 
      Lower limiting frequency (-3dB)   - 

       

      Our specifications for the net volume of sealed enclosures always refer to unfilled cabinets without any damping material inside. The net volumes can be reduced if the cabinet will be filled completely (not stuffed) with suitable materials. The following materials can be used for this purpose:

      • polyester wadding achieves a volume reduction of up to 5%
      • mineral wool or rock wool achieves a volume reduction of up to 10%
      • sheep wool achieves a volume reduction of up to 20% come

      Note:
      Damping of vented enclosure (as long as they are solely used in the frequency range up to 150 Hz) is counterproductive because the damping material generally reduces the effectiveness of the bassreflex port.

       

      Scope of delivery

      1 x High-End Subwoofer BRAX MATRIX ML8 SUB
      1 x Certificate
      1 x Data sheet

       

      INSTRUKCIJOS

      User Manual (EN).

       

      Kategorijos

      BRAX MATRIX ML8 SUB, automobilinis žemų dažnių garsiakalbis
      Brax

      BRAX MATRIX ML8 SUB, automobilinis žemų dažnių garsiakalbis

      1,120.00 €

      Legendinė BRAX MATRIX garsiakalbių serija, kuri jau daugelį metų yra moderniausios garso kokybės sinonimas, dabar papildyta modeliu ML8 SUB.

      APRAŠYMAS

      BRAX MATRIX ML8 SUB

      The legendary BRAX MATRIX loudspeaker series – since many years the synonym for state-of-the-art sound quality – is now expanded with the ML8 SUB. Just as uncompromisingly developed and manufactured as all BRAX loudspeakers, it pursues the goal of acoustic perfection.

      Precision in perfection!

      For years, our BRAX subwoofer has been the benchmark for precision and unconditionally controlled bass reproduction. It was even more demanding to create a BRAX subwoofer that uncompromisingly reproduces deep bass even in smallest possible enclosures. Each component of this exceptional driver is not only made for dynamics and perfect tonality, but is also designed to convert even huge loads of amplifier power into sound pressure without compression.

      MicroSphere – a material for two opposing requirements

      The demand for maximum cone stiffness in combination with highest innner damping seems like the attempt to square the circle – actually the unique "MicroSphere" coating, where ceramic micro-hollow spheres with a diameter of only 75 microns are embedded in a polymer layer and applied to the diaphragm makes the impossible possible. It warrants for maximum acoustic precision and unrivaled sound quality. 

      Timeless elegance

      The clear, reduced design language is the distinguishing feature of every BRAX product – the ML8 SUB follows this philosophy unconditionally. The combination of the finest materials is underlined once more by the optionally available MR8 stainless steel ring, which can be used as a mounting ring or to fix the grille, depending on the installation position. Of course, the ML8 SUB comes in a noble wooden box with its own serial number, which is recorded in a service database.

      Features

      • Exceptional stiff hand-scooped paper cone with unique “MicroSphere” coating consisting of micro ceramic hollow spheres embedded in a polymer layer offers best possible impulse response
      • Specially shaped rubber surround for long linear cone excursion
      • 2 x 2 Ohms dual voice coil with exceptional winding height for high linear excursion and lowest possible distortion
      • Optimized voice coil ventilation through large, mesh-protected holes in T-yoke and basket for almost zero compression effects and maximum heat dissipation
      • Specially developed, aerodynamically optimized and extremely solid aluminum diecast basket
      • Extremely powerful and precisely machined magnet system for highest magnetic flux linearity
      • Massive push-terminals for large wire gauge

          TECHNINIAI DUOMENYS

          SPECIFIKACIJOS

          Power RMS / max.   400 / 800 Watt
          Impedance  Z 2 x 2 Ω
          DC resistance  Re 2 x 1.9 Ω
          Resonance frequency  Fs 32 Hz
          Mechanical Q factor  Qms 9.63
          Electrical Q factor  Qes 0.60
          Total Q factor Qts 0.56
          Compliance Cms 323 µm/N
          Equivalent air volume Vas 22 L
          Force factor  B*I 10.3 Tm
          Efficiency 1 W / 1 m SPL 85 dB
          Cone area  Sd 219 cm²
          Moving mass  Mms 83 g
          Cone material   Paper cone with “MicroSphere” coating consisting of micro ceramic hollow spheres embedded in a polymer layer
          Mechanical resistance  Rms 1.67 kg/s
          Voice coil diameter ø 50 mm / 2.0"
          Voice coil winding height   26.4 mm / 1.0"
          Max. linear excursion  Xmax +/- 9,2 mm
          Outer diameter ø 222 mm / 8.7"
          Installation diameter ø 191 mm / 7.5"
          Installation depth   95.6 mm / 3.8"
                 
          Recommended enclosure volumes      
          Sealed box   Optimal enclosure size Minimal enclosure size
          Net volume   17 L 10 L
          Lower limiting frequency (-3dB)   43 Hz 48 Hz
          DSP setting highpass filter   Frequency: 32 Hz
          Characteristic: “Self-define”
          Q-Factor: 1.0          		 Frequenz: 35 Hz
          Charakteristik: “Self-define”
          Q-Faktor: 1,0
                 
          Vented box      
          Net volume   - 
          Port diameter ø - 
          Port area   - 
          Port length   - 
          Port tuning frequency Fb - 
          Lower limiting frequency (-3dB)   - 

           

          Our specifications for the net volume of sealed enclosures always refer to unfilled cabinets without any damping material inside. The net volumes can be reduced if the cabinet will be filled completely (not stuffed) with suitable materials. The following materials can be used for this purpose:

          • polyester wadding achieves a volume reduction of up to 5%
          • mineral wool or rock wool achieves a volume reduction of up to 10%
          • sheep wool achieves a volume reduction of up to 20% come

          Note:
          Damping of vented enclosure (as long as they are solely used in the frequency range up to 150 Hz) is counterproductive because the damping material generally reduces the effectiveness of the bassreflex port.

           

          Scope of delivery

          1 x High-End Subwoofer BRAX MATRIX ML8 SUB
          1 x Certificate
          1 x Data sheet

           

          DOKUMENTAI

          INSTRUKCIJOS

          User Manual (EN).

           

          Žiūrėti produktą

          • Gyvas pokalbis

            Ekspertų nuomonė ir patarimai

          • Pristatymas

            Lietuvoje per 1-2 d.d.

          • Darbo valandos

            Darbo dienomis 9.00 - 18.00

          • Atsiskaitymas

            Patogiausi būdai internetu
          Atgal į viršų

          Legendinė BRAX MATRIX garsiakalbių serija, kuri jau daugelį metų yra moderniausios garso kokybės sinonimas, dabar papildyta modeliu ML8 SUB.

          • Rekomend. stiprintuvo galia: 400W.
          • Rezonansinis dažnis: 32 Hz.
          • Varža: 2 x 2 Ω.

          BRAX MATRIX ML8 SUB

          The legendary BRAX MATRIX loudspeaker series – since many years the synonym for state-of-the-art sound quality – is now expanded with the ML8 SUB. Just as uncompromisingly developed and manufactured as all BRAX loudspeakers, it pursues the goal of acoustic perfection.

          Precision in perfection!

          For years, our BRAX subwoofer has been the benchmark for precision and unconditionally controlled bass reproduction. It was even more demanding to create a BRAX subwoofer that uncompromisingly reproduces deep bass even in smallest possible enclosures. Each component of this exceptional driver is not only made for dynamics and perfect tonality, but is also designed to convert even huge loads of amplifier power into sound pressure without compression.

          MicroSphere – a material for two opposing requirements

          The demand for maximum cone stiffness in combination with highest innner damping seems like the attempt to square the circle – actually the unique "MicroSphere" coating, where ceramic micro-hollow spheres with a diameter of only 75 microns are embedded in a polymer layer and applied to the diaphragm makes the impossible possible. It warrants for maximum acoustic precision and unrivaled sound quality. 

          Timeless elegance

          The clear, reduced design language is the distinguishing feature of every BRAX product – the ML8 SUB follows this philosophy unconditionally. The combination of the finest materials is underlined once more by the optionally available MR8 stainless steel ring, which can be used as a mounting ring or to fix the grille, depending on the installation position. Of course, the ML8 SUB comes in a noble wooden box with its own serial number, which is recorded in a service database.

          Features
          • Exceptional stiff hand-scooped paper cone with unique “MicroSphere” coating consisting of micro ceramic hollow spheres embedded in a polymer layer offers best possible impulse response
          • Specially shaped rubber surround for long linear cone excursion
          • 2 x 2 Ohms dual voice coil with exceptional winding height for high linear excursion and lowest possible distortion
          • Optimized voice coil ventilation through large, mesh-protected holes in T-yoke and basket for almost zero compression effects and maximum heat dissipation
          • Specially developed, aerodynamically optimized and extremely solid aluminum diecast basket
          • Extremely powerful and precisely machined magnet system for highest magnetic flux linearity
          • Massive push-terminals for large wire gauge

              SPECIFIKACIJOS

              Power RMS / max.   400 / 800 Watt
              Impedance  Z 2 x 2 Ω
              DC resistance  Re 2 x 1.9 Ω
              Resonance frequency  Fs 32 Hz
              Mechanical Q factor  Qms 9.63
              Electrical Q factor  Qes 0.60
              Total Q factor Qts 0.56
              Compliance Cms 323 µm/N
              Equivalent air volume Vas 22 L
              Force factor  B*I 10.3 Tm
              Efficiency 1 W / 1 m SPL 85 dB
              Cone area  Sd 219 cm²
              Moving mass  Mms 83 g
              Cone material   Paper cone with “MicroSphere” coating consisting of micro ceramic hollow spheres embedded in a polymer layer
              Mechanical resistance  Rms 1.67 kg/s
              Voice coil diameter ø 50 mm / 2.0"
              Voice coil winding height   26.4 mm / 1.0"
              Max. linear excursion  Xmax +/- 9,2 mm
              Outer diameter ø 222 mm / 8.7"
              Installation diameter ø 191 mm / 7.5"
              Installation depth   95.6 mm / 3.8"
                     
              Recommended enclosure volumes      
              Sealed box   Optimal enclosure size Minimal enclosure size
              Net volume   17 L 10 L
              Lower limiting frequency (-3dB)   43 Hz 48 Hz
              DSP setting highpass filter   Frequency: 32 Hz
              Characteristic: “Self-define”
              Q-Factor: 1.0              		 Frequenz: 35 Hz
              Charakteristik: “Self-define”
              Q-Faktor: 1,0
                     
              Vented box      
              Net volume   - 
              Port diameter ø - 
              Port area   - 
              Port length   - 
              Port tuning frequency Fb - 
              Lower limiting frequency (-3dB)   - 

               

              Our specifications for the net volume of sealed enclosures always refer to unfilled cabinets without any damping material inside. The net volumes can be reduced if the cabinet will be filled completely (not stuffed) with suitable materials. The following materials can be used for this purpose:

              • polyester wadding achieves a volume reduction of up to 5%
              • mineral wool or rock wool achieves a volume reduction of up to 10%
              • sheep wool achieves a volume reduction of up to 20% come

              Note:
              Damping of vented enclosure (as long as they are solely used in the frequency range up to 150 Hz) is counterproductive because the damping material generally reduces the effectiveness of the bassreflex port.

               

              Scope of delivery

              1 x High-End Subwoofer BRAX MATRIX ML8 SUB
              1 x Certificate
              1 x Data sheet

               

              INSTRUKCIJOS

              User Manual (EN).