Lentyninė garso kolonėlė KEF Q150, 100W

249.50 €


Siuntimas ir pristatymas

Prekes visoje Lietuvoje (išskyrus Kuršių Neriją) pristato skubių siuntų tarnyba "Venipak" per 1-2 darbo dienas, tiesiai į namus ar darbovietę. Pristatymas yra nemokamas, jeigu prekių suma viršija 100€, kitu atveju taikomas 4,99€ pristatymo mokestis. Kurjeris pieš atveždamas prekes su Jumis susisieks Jūsų nurodytu telefono numeriu ir suderins pristatymo laiką.

Kaip pagrindinės kolonėlės, kolonėlės foniniam garsui ar galinės namų kino sistemoje - naujosios Q serijos lentyninės kolonėlės atveria audiofilinės kokybės garso pasaulį už stebinančiai prieinamą kainą.

Kaina nurodyta be grotelių.

"Sit anywhere" Uni-Q Sound

At the heart of the evolved Q Series is the Uni-Q driver array. KEF's signature innovation places the tweeter in the acoustic center of the midrange cone, bringing the acoustic ideal of a single point source closer than ever to realisation. The result is a more detailed, more accurate three-dimensional sound image, which is dispersed more evenly throughout the room than is possible with a conventional speaker. Uni-Q's ultra-wide dispersion is further enhanced by KEF's 'tangerine' waveguide over the tweeter dome.

Uni-Q sound taken to the next level

With the addition of the damped tweeter loading tube providing a gentle termination of sound produced from the back of the tweeter, lower treble performance is improved dramatically and a new low-distortion inductor on the crossover provides cleaner bass.
To optimize the resolution and purity of the Q Series bookshelf speakers, the Uni-Q driver has been repositioned to the center of the cabinet to reduce unwanted internal resonance and adds refinement to their sonic clarity and detail.

CFD Designed Port

Featuring a Computational Fluid Dyanmics (CFD) port design with the port repositioned to the rear of the speaker, clarity is improved by reducing the audibility of the midrange leakage through the port. The geometry of the ports have been tuned to minimize turbulence at higher levels resulting in a reduction in port noise and less LF compression.

MODEL Q150
DESIGN Two-way bass reflex
DRIVE UNITS 130mm (5.25in.) aluminium Uni-Q
25mm (1in.)vented aluminium dome HF
FREQUENCY RANGE FREE FIELD 47Hz (-6dB)
FREQUENCY RESPONSE 51Hz-28kHz (±3dB)
CROSSOVER FREQUENCIES 2.5kHz
MAXIMUM OUTPUT 108dB
AMPLIFIER REQUIREMENTS 10-100W
SENSITIVITY 86dB (2.83V/1m)
NOMINAL IMPEDANCE 8 Ohms (min.3.7 Ohms)
DIMENSIONS H x W x D:
303 x 180 x 278 mm
307 x 180 x 278 mm (with Rubber Feet)
WEIGHT 5.6kg (12.3lbs)
UNIT MEASUREMENT Unit
Lentyninė garso kolonėlė KEF Q150, 100W Kolonėlės KEF AUTOGARSAS.LT
KEF

Lentyninė garso kolonėlė KEF Q150, 100W

249.50 €

Kaip pagrindinės kolonėlės, kolonėlės foniniam garsui ar galinės namų kino sistemoje - naujosios Q serijos lentyninės kolonėlės atveria audiofilinės kokybės garso pasaulį už stebinančiai prieinamą kainą.

Kaina nurodyta be grotelių.

VIDEO

APRAŠYMAS

"Sit anywhere" Uni-Q Sound

At the heart of the evolved Q Series is the Uni-Q driver array. KEF's signature innovation places the tweeter in the acoustic center of the midrange cone, bringing the acoustic ideal of a single point source closer than ever to realisation. The result is a more detailed, more accurate three-dimensional sound image, which is dispersed more evenly throughout the room than is possible with a conventional speaker. Uni-Q's ultra-wide dispersion is further enhanced by KEF's 'tangerine' waveguide over the tweeter dome.

Uni-Q sound taken to the next level

With the addition of the damped tweeter loading tube providing a gentle termination of sound produced from the back of the tweeter, lower treble performance is improved dramatically and a new low-distortion inductor on the crossover provides cleaner bass.
To optimize the resolution and purity of the Q Series bookshelf speakers, the Uni-Q driver has been repositioned to the center of the cabinet to reduce unwanted internal resonance and adds refinement to their sonic clarity and detail.

CFD Designed Port

Featuring a Computational Fluid Dyanmics (CFD) port design with the port repositioned to the rear of the speaker, clarity is improved by reducing the audibility of the midrange leakage through the port. The geometry of the ports have been tuned to minimize turbulence at higher levels resulting in a reduction in port noise and less LF compression.

TECHNINIAI DUOMENYS

MODEL Q150
DESIGN Two-way bass reflex
DRIVE UNITS 130mm (5.25in.) aluminium Uni-Q
25mm (1in.)vented aluminium dome HF
FREQUENCY RANGE FREE FIELD 47Hz (-6dB)
FREQUENCY RESPONSE 51Hz-28kHz (±3dB)
CROSSOVER FREQUENCIES 2.5kHz
MAXIMUM OUTPUT 108dB
AMPLIFIER REQUIREMENTS 10-100W
SENSITIVITY 86dB (2.83V/1m)
NOMINAL IMPEDANCE 8 Ohms (min.3.7 Ohms)
DIMENSIONS H x W x D:
303 x 180 x 278 mm
307 x 180 x 278 mm (with Rubber Feet)
WEIGHT 5.6kg (12.3lbs)
UNIT MEASUREMENT Unit

Spalva

Žiūrėti produktą

Kaip pagrindinės kolonėlės, kolonėlės foniniam garsui ar galinės namų kino sistemoje - naujosios Q serijos lentyninės kolonėlės atveria audiofilinės kokybės garso pasaulį už stebinančiai prieinamą kainą.

Kaina nurodyta be grotelių.

"Sit anywhere" Uni-Q Sound

At the heart of the evolved Q Series is the Uni-Q driver array. KEF's signature innovation places the tweeter in the acoustic center of the midrange cone, bringing the acoustic ideal of a single point source closer than ever to realisation. The result is a more detailed, more accurate three-dimensional sound image, which is dispersed more evenly throughout the room than is possible with a conventional speaker. Uni-Q's ultra-wide dispersion is further enhanced by KEF's 'tangerine' waveguide over the tweeter dome.

Uni-Q sound taken to the next level

With the addition of the damped tweeter loading tube providing a gentle termination of sound produced from the back of the tweeter, lower treble performance is improved dramatically and a new low-distortion inductor on the crossover provides cleaner bass.
To optimize the resolution and purity of the Q Series bookshelf speakers, the Uni-Q driver has been repositioned to the center of the cabinet to reduce unwanted internal resonance and adds refinement to their sonic clarity and detail.

CFD Designed Port

Featuring a Computational Fluid Dyanmics (CFD) port design with the port repositioned to the rear of the speaker, clarity is improved by reducing the audibility of the midrange leakage through the port. The geometry of the ports have been tuned to minimize turbulence at higher levels resulting in a reduction in port noise and less LF compression.

MODEL Q150
DESIGN Two-way bass reflex
DRIVE UNITS 130mm (5.25in.) aluminium Uni-Q
25mm (1in.)vented aluminium dome HF
FREQUENCY RANGE FREE FIELD 47Hz (-6dB)
FREQUENCY RESPONSE 51Hz-28kHz (±3dB)
CROSSOVER FREQUENCIES 2.5kHz
MAXIMUM OUTPUT 108dB
AMPLIFIER REQUIREMENTS 10-100W
SENSITIVITY 86dB (2.83V/1m)
NOMINAL IMPEDANCE 8 Ohms (min.3.7 Ohms)
DIMENSIONS H x W x D:
303 x 180 x 278 mm
307 x 180 x 278 mm (with Rubber Feet)
WEIGHT 5.6kg (12.3lbs)
UNIT MEASUREMENT Unit