Monitor Audio IA200-2C, instaliacinis garso stiprintuvas

1,330.00 €

Monitor Audio IA200-2C, instaliacinis garso stiprintuvas yra užsakytas ir bus išsiųstas, kai tik bus sandėlyje.


Siuntimas ir pristatymas

Prekes visoje Lietuvoje (išskyrus Kuršių Neriją) pristato skubių siuntų tarnyba "Venipak" per 1-2 darbo dienas, tiesiai į namus ar darbovietę. Pristatymas yra nemokamas, jeigu prekių suma viršija 100€, kitu atveju taikomas 4,99€ pristatymo mokestis. Kurjeris pieš atveždamas prekes su Jumis susisieks Jūsų nurodytu telefono numeriu ir suderins pristatymo laiką.

Diskretiško dizaino, 2-jų kanalų instaliacinis garso stiprintuvas pasižymi puikiu technologiniu funkcionalumu.

  • Galia: 2 x 200 W.
  • Varža: 4 omai.
  • Palaikomas IP Valdymas.
  • SN:R dažnis: -100 dB (20 Hz – 20 kHz).

The IA200-2C Installation Amplifier supplies up to 200 watts per channel at 4 ohms. As a Monitor Audio ‘Connect’ amplifier, it utilises our Connect IP interface, a web application which can be accessed by any device connected to the internet with a web browser on the same network.

A slim 1U rack height, it universally fits into most racks whilst delivering 93% energy efficiency. The IP control is via the RJ-45 input, controlling power On/Off, volume, muting, and input source selections. A visual match for the rest of the Monitor Audio Installation Amplifier line, the IA200-2C is ready for any project.

Works with –


SPECIFIKACIJOS

'Connect' IP Control

Yes

Channel Number

2 (1 Stereo Pair)

Power (W / Channel) | 4 ohms

200 W

Power (W / Channel) | 8 ohms

150 W

Power (W / Channel) | Bridge (8 ohms)

470 W (1CH)

Power (W / Channel) | 70V

N/A

Input Impedance

20 K ohms

Output Impedance (Loop RCA)

600 ohms

Input Sensitivity

100 mV / 1 W, 1230 mV – Full power

Maximum Input Voltage

2.9 V

Signal to Noise (SN:R)

-100 dB (20 Hz – 20 kHz)

Frequency Response

5 Hz – 50 kHz

Total Harmonic Distortion THD + N@1 KHz

0.03%

Rack Height

1U

Dimensions (Excluding Feet (H x W x D))

42.4 x 438 x 427 mm (111/16 x 171/4 x 1613/16")

Dimensions (Including Feet (H x W x D))

52.8  x 438  x 427 mm (21/16 x 171/4 x 1613/16")

Width (including rack brackets)

482 mm (19")

IP Communication

TCP/IP (RJ-45 10/100 Base T)

Mains Operating Voltage

100 – 120 V @ 60 Hz
220 – 240 V @ 50 Hz

Fuse Rating

5 A (T5AL ~ 250VAC)

Standby Power Consumption

<0.5 W (green mode)

Networked Standby Power Consumption

<2 W

Weight

5.3 kg (11 lb 10 oz)

Sold As

Single Unit

INSTRUKCIJOS

User Manual (EN). Geram stiprintuvo veikimui užtiktrinti reikalingos naujausios tvarkyklės. Jas galite atsisiųsti iš čia: NAUJAUSIOS TVARKYKLĖS.
Monitor Audio IA200-2C, instaliacinis garso stiprintuvas
Monitor Audio

Monitor Audio IA200-2C, instaliacinis garso stiprintuvas

1,330.00 €

Diskretiško dizaino, 2-jų kanalų instaliacinis garso stiprintuvas pasižymi puikiu technologiniu funkcionalumu.

APRAŠYMAS

The IA200-2C Installation Amplifier supplies up to 200 watts per channel at 4 ohms. As a Monitor Audio ‘Connect’ amplifier, it utilises our Connect IP interface, a web application which can be accessed by any device connected to the internet with a web browser on the same network.

A slim 1U rack height, it universally fits into most racks whilst delivering 93% energy efficiency. The IP control is via the RJ-45 input, controlling power On/Off, volume, muting, and input source selections. A visual match for the rest of the Monitor Audio Installation Amplifier line, the IA200-2C is ready for any project.

Works with –


TECHNINIAI DUOMENYS

SPECIFIKACIJOS

'Connect' IP Control

Yes

Channel Number

2 (1 Stereo Pair)

Power (W / Channel) | 4 ohms

200 W

Power (W / Channel) | 8 ohms

150 W

Power (W / Channel) | Bridge (8 ohms)

470 W (1CH)

Power (W / Channel) | 70V

N/A

Input Impedance

20 K ohms

Output Impedance (Loop RCA)

600 ohms

Input Sensitivity

100 mV / 1 W, 1230 mV – Full power

Maximum Input Voltage

2.9 V

Signal to Noise (SN:R)

-100 dB (20 Hz – 20 kHz)

Frequency Response

5 Hz – 50 kHz

Total Harmonic Distortion THD + N@1 KHz

0.03%

Rack Height

1U

Dimensions (Excluding Feet (H x W x D))

42.4 x 438 x 427 mm (111/16 x 171/4 x 1613/16")

Dimensions (Including Feet (H x W x D))

52.8  x 438  x 427 mm (21/16 x 171/4 x 1613/16")

Width (including rack brackets)

482 mm (19")

IP Communication

TCP/IP (RJ-45 10/100 Base T)

Mains Operating Voltage

100 – 120 V @ 60 Hz
220 – 240 V @ 50 Hz

Fuse Rating

5 A (T5AL ~ 250VAC)

Standby Power Consumption

<0.5 W (green mode)

Networked Standby Power Consumption

<2 W

Weight

5.3 kg (11 lb 10 oz)

Sold As

Single Unit

DOKUMENTAI

INSTRUKCIJOS

User Manual (EN).
Geram stiprintuvo veikimui užtiktrinti reikalingos naujausios tvarkyklės. Jas galite atsisiųsti iš čia: NAUJAUSIOS TVARKYKLĖS.
Žiūrėti produktą

Diskretiško dizaino, 2-jų kanalų instaliacinis garso stiprintuvas pasižymi puikiu technologiniu funkcionalumu.

  • Galia: 2 x 200 W.
  • Varža: 4 omai.
  • Palaikomas IP Valdymas.
  • SN:R dažnis: -100 dB (20 Hz – 20 kHz).

The IA200-2C Installation Amplifier supplies up to 200 watts per channel at 4 ohms. As a Monitor Audio ‘Connect’ amplifier, it utilises our Connect IP interface, a web application which can be accessed by any device connected to the internet with a web browser on the same network.

A slim 1U rack height, it universally fits into most racks whilst delivering 93% energy efficiency. The IP control is via the RJ-45 input, controlling power On/Off, volume, muting, and input source selections. A visual match for the rest of the Monitor Audio Installation Amplifier line, the IA200-2C is ready for any project.

Works with –


SPECIFIKACIJOS

'Connect' IP Control

Yes

Channel Number

2 (1 Stereo Pair)

Power (W / Channel) | 4 ohms

200 W

Power (W / Channel) | 8 ohms

150 W

Power (W / Channel) | Bridge (8 ohms)

470 W (1CH)

Power (W / Channel) | 70V

N/A

Input Impedance

20 K ohms

Output Impedance (Loop RCA)

600 ohms

Input Sensitivity

100 mV / 1 W, 1230 mV – Full power

Maximum Input Voltage

2.9 V

Signal to Noise (SN:R)

-100 dB (20 Hz – 20 kHz)

Frequency Response

5 Hz – 50 kHz

Total Harmonic Distortion THD + N@1 KHz

0.03%

Rack Height

1U

Dimensions (Excluding Feet (H x W x D))

42.4 x 438 x 427 mm (111/16 x 171/4 x 1613/16")

Dimensions (Including Feet (H x W x D))

52.8  x 438  x 427 mm (21/16 x 171/4 x 1613/16")

Width (including rack brackets)

482 mm (19")

IP Communication

TCP/IP (RJ-45 10/100 Base T)

Mains Operating Voltage

100 – 120 V @ 60 Hz
220 – 240 V @ 50 Hz

Fuse Rating

5 A (T5AL ~ 250VAC)

Standby Power Consumption

<0.5 W (green mode)

Networked Standby Power Consumption

<2 W

Weight

5.3 kg (11 lb 10 oz)

Sold As

Single Unit

INSTRUKCIJOS

User Manual (EN). Geram stiprintuvo veikimui užtiktrinti reikalingos naujausios tvarkyklės. Jas galite atsisiųsti iš čia: NAUJAUSIOS TVARKYKLĖS.