Monitor Audio IA60-12, instaliacinis garso stiprintuvas

1,755.00 €

Monitor Audio IA60-12, instaliacinis garso stiprintuvas yra užsakytas ir bus išsiųstas, kai tik bus sandėlyje.


Siuntimas ir pristatymas

Prekes visoje Lietuvoje (išskyrus Kuršių Neriją) pristato skubių siuntų tarnyba "Venipak" per 1-2 darbo dienas, tiesiai į namus ar darbovietę. Pristatymas yra nemokamas, jeigu prekių suma viršija 100€, kitu atveju taikomas 4,99€ pristatymo mokestis. Kurjeris pieš atveždamas prekes su Jumis susisieks Jūsų nurodytu telefono numeriu ir suderins pristatymo laiką.

Diskretiško dizaino, 12-likos kanalų instaliacinis garso stiprintuvas pasižymi puikiu technologiniu funkcionalumu ir puikiomis veikimo savybėmis.

  • Galia: 12 x 60 W.
  • Varža: 4 omai.
  • Įėjimo jautrumas: 100 mV / 1 W, 700 mV.
  • SN:R dažnis: -100 dB (20 Hz – 20 kHz).

From our line of distribution amplifiers, meticulously designed to satisfy the customer and the installer, the IA60-12 powers up to 12 channels (six stereo pairs) and is configurable to 1, 2, 3, 4, 5, 6, or 12 channels. Employing Hypex amplifier technology housed in a 2U case, we front-mount the power switch and the trigger input (– 3 – 30 V AC or DC) provides signal for additional amplifiers or other equipment.

This model offers Buss Inputs and A/B Loop Outputs – the Loop outputs are non-buffered, meaning that the maximum number of amplifiers that can be looped together will depend on the output capability of your source component. Smoothly delivering 60 watts per channel at 4 ohms, the IA60-12 lets you trust in Monitor Audio to successfully your project.



SPECIFIKACIJOS

'Connect' IP Control

N/A

Channel Number

12 (6 Stereo Pairs)

Power (W / Channel) | 4 ohms

60 W

Power (W / Channel) | 8 ohms

45 W

Power (W / Channel) | Bridge (8 ohms)

100 W (6CH)

Power (W / Channel) | 70V

N/A

Input Impedance

20 K ohms

Output Impedance (Loop RCA)

600 ohms

Input Sensitivity

100 mV / 1 W, 700 mV – Full power

Maximum Input Voltage

2.9 V

Signal to Noise (SN:R)

-100 dB (20 Hz – 20 kHz)

Frequency Response

5 Hz – 50 kHz

Total Harmonic Distortion THD + N@1 KHz

0.03%

Rack Height

2U

Dimensions (Excluding Feet (H x W x D))

86.8 x 438 x 427 mm (37/16 x 171/4 x 1613/16")

Dimensions (Including Feet (H x W x D))

97.2 x 438 x 427 mm (313/16 x 171/4 x 1613/16")

Width (including rack brackets)

482 mm (19")

IP Communication

N/A

Mains Operating Voltage

100 –120 V @ 60 Hz
220 – 240 V @ 50 Hz

Fuse Rating

10 A (T10AL ~ 250VAC)

Standby Power Consumption

<0.5 W (green mode)

Networked Standby Power Consumption

N/A

Weight

7.34 kg (16 lb 2 oz)

Sold As

Single Unit




INSTRUKCIJOS

User Manual (EN).
Monitor Audio IA60-12, instaliacinis garso stiprintuvas
Monitor Audio

Monitor Audio IA60-12, instaliacinis garso stiprintuvas

1,755.00 €

Diskretiško dizaino, 12-likos kanalų instaliacinis garso stiprintuvas pasižymi puikiu technologiniu funkcionalumu ir puikiomis veikimo savybėmis.

APRAŠYMAS

From our line of distribution amplifiers, meticulously designed to satisfy the customer and the installer, the IA60-12 powers up to 12 channels (six stereo pairs) and is configurable to 1, 2, 3, 4, 5, 6, or 12 channels. Employing Hypex amplifier technology housed in a 2U case, we front-mount the power switch and the trigger input (– 3 – 30 V AC or DC) provides signal for additional amplifiers or other equipment.

This model offers Buss Inputs and A/B Loop Outputs – the Loop outputs are non-buffered, meaning that the maximum number of amplifiers that can be looped together will depend on the output capability of your source component. Smoothly delivering 60 watts per channel at 4 ohms, the IA60-12 lets you trust in Monitor Audio to successfully your project.



TECHNINIAI DUOMENYS

SPECIFIKACIJOS

'Connect' IP Control

N/A

Channel Number

12 (6 Stereo Pairs)

Power (W / Channel) | 4 ohms

60 W

Power (W / Channel) | 8 ohms

45 W

Power (W / Channel) | Bridge (8 ohms)

100 W (6CH)

Power (W / Channel) | 70V

N/A

Input Impedance

20 K ohms

Output Impedance (Loop RCA)

600 ohms

Input Sensitivity

100 mV / 1 W, 700 mV – Full power

Maximum Input Voltage

2.9 V

Signal to Noise (SN:R)

-100 dB (20 Hz – 20 kHz)

Frequency Response

5 Hz – 50 kHz

Total Harmonic Distortion THD + N@1 KHz

0.03%

Rack Height

2U

Dimensions (Excluding Feet (H x W x D))

86.8 x 438 x 427 mm (37/16 x 171/4 x 1613/16")

Dimensions (Including Feet (H x W x D))

97.2 x 438 x 427 mm (313/16 x 171/4 x 1613/16")

Width (including rack brackets)

482 mm (19")

IP Communication

N/A

Mains Operating Voltage

100 –120 V @ 60 Hz
220 – 240 V @ 50 Hz

Fuse Rating

10 A (T10AL ~ 250VAC)

Standby Power Consumption

<0.5 W (green mode)

Networked Standby Power Consumption

N/A

Weight

7.34 kg (16 lb 2 oz)

Sold As

Single Unit




DOKUMENTAI

INSTRUKCIJOS

User Manual (EN).
Žiūrėti produktą

Diskretiško dizaino, 12-likos kanalų instaliacinis garso stiprintuvas pasižymi puikiu technologiniu funkcionalumu ir puikiomis veikimo savybėmis.

  • Galia: 12 x 60 W.
  • Varža: 4 omai.
  • Įėjimo jautrumas: 100 mV / 1 W, 700 mV.
  • SN:R dažnis: -100 dB (20 Hz – 20 kHz).

From our line of distribution amplifiers, meticulously designed to satisfy the customer and the installer, the IA60-12 powers up to 12 channels (six stereo pairs) and is configurable to 1, 2, 3, 4, 5, 6, or 12 channels. Employing Hypex amplifier technology housed in a 2U case, we front-mount the power switch and the trigger input (– 3 – 30 V AC or DC) provides signal for additional amplifiers or other equipment.

This model offers Buss Inputs and A/B Loop Outputs – the Loop outputs are non-buffered, meaning that the maximum number of amplifiers that can be looped together will depend on the output capability of your source component. Smoothly delivering 60 watts per channel at 4 ohms, the IA60-12 lets you trust in Monitor Audio to successfully your project.



SPECIFIKACIJOS

'Connect' IP Control

N/A

Channel Number

12 (6 Stereo Pairs)

Power (W / Channel) | 4 ohms

60 W

Power (W / Channel) | 8 ohms

45 W

Power (W / Channel) | Bridge (8 ohms)

100 W (6CH)

Power (W / Channel) | 70V

N/A

Input Impedance

20 K ohms

Output Impedance (Loop RCA)

600 ohms

Input Sensitivity

100 mV / 1 W, 700 mV – Full power

Maximum Input Voltage

2.9 V

Signal to Noise (SN:R)

-100 dB (20 Hz – 20 kHz)

Frequency Response

5 Hz – 50 kHz

Total Harmonic Distortion THD + N@1 KHz

0.03%

Rack Height

2U

Dimensions (Excluding Feet (H x W x D))

86.8 x 438 x 427 mm (37/16 x 171/4 x 1613/16")

Dimensions (Including Feet (H x W x D))

97.2 x 438 x 427 mm (313/16 x 171/4 x 1613/16")

Width (including rack brackets)

482 mm (19")

IP Communication

N/A

Mains Operating Voltage

100 –120 V @ 60 Hz
220 – 240 V @ 50 Hz

Fuse Rating

10 A (T10AL ~ 250VAC)

Standby Power Consumption

<0.5 W (green mode)

Networked Standby Power Consumption

N/A

Weight

7.34 kg (16 lb 2 oz)

Sold As

Single Unit




INSTRUKCIJOS

User Manual (EN).