1 11
Rega

Rega Planar 1 / Carbon Plokštelių grotuvas

339.00 € 399.00 €

Siuntimas ir pristatymas

Prekes visoje Lietuvoje (išskyrus Kuršių Neriją) pristato skubių siuntų tarnyba "Venipak" per 1-2 darbo dienas, tiesiai į namus ar darbovietę. Pristatymas yra nemokamas, jeigu prekių suma viršija 100€, kitu atveju taikomas 4,99€ pristatymo mokestis. Kurjeris pieš atveždamas prekes su Jumis susisieks Jūsų nurodytu telefono numeriu ir suderins pristatymo laiką.

  • Naujausias RB110 tonarmas ir Carbon galvutė
  • 24V mažatriukšmis sinchroninis variklis
  • Tonarme panaudoti dar tikslesni mažesnės trinties patentuoti guoliai
  • Naujas 23mm storio didesnės masės diskas iš fenolio
  • Blizgiu akrilu laminuotas korpusas

 

The new Planar 1 is the most user friendly Rega turntable to date. Now with preset bias force on the brand new RB110 tonearm, the Planar 1 is set up in seconds after unpacking. Simply slide the balance weight onto the rear of the tonearm as far as it will go, remove the stylus guard and start spinning your favourite vinyl.

Performance beyond price
Every single aspect of the Planar 1 has been meticulously designed to improve performance. For the first time the Planar 1 is now running a 24v, low noise, synchronous motor to reduce vibration transfer combined with our brand new RB110 tonearm fitted with Rega's bespoke zero play bearings. Only sharing the drive belt, sub platter and dust cover from the outgoing RP1, this is truly a new turntable for 2016.

If you are looking to get back into vinyl and want serious performance that will last you a lifetime, then look no further.

Tonearm
Brand new RB110 tonearm built with the new Rega designed, bespoke, zero play bearings with ultra-low friction performance (Patent Pending). New bias assembly and integrated arm clip. Includes automatic bias adjustment negating the need for the user to set bias, making this the most ‘Plug & Play’ turntable we have ever manufactured. New ergonomically, re-designed and stiffer headshell for improved usability and appearance.

Cartridge
Rega Carbon cartridge supplied fitted as standard.

24v synchronous motor
The first entry level Rega turntable to use a 24v, synchronous AC motor with a new motor PCB and aluminium pulley offering low noise and better speed stability.

Plinth
Brand new Thermoset, gloss laminated plinth with vastly improved appearance and new ergonomically positioned on/off switch located on the underside. Two stunning plinth finishes available, gloss black and gloss white.

Central Bearing housing
Re-designed brass main bearing, offering improved fit and removing stress on the bearing itself whilst minimising the transfer of potential energy. (Patent pending)

Platter
Brand new, 23mm, higher mass, phenolic platter with improved flywheel effect for improved speed stability.

Re-Designed feet
New improved feet to increase stability and reduce vibration transfer.

Motor cover tray
New motor cover tray with integrated cooling.

Balance Weight
New 111g ‘Plug and Play’ balance weight.

Vartotojo vadovas

    Kategorijos

    Rega

    Rega Planar 1 / Carbon Plokštelių grotuvas

    Nuo 339.00 € 399.00 €
    • Naujausias RB110 tonarmas ir Carbon galvutė
    • 24V mažatriukšmis sinchroninis variklis
    • Tonarme panaudoti dar tikslesni mažesnės trinties patentuoti guoliai
    • Naujas 23mm storio didesnės masės diskas iš fenolio
    • Blizgiu akrilu laminuotas korpusas

    VIDEO

    APRAŠYMAS

    The new Planar 1 is the most user friendly Rega turntable to date. Now with preset bias force on the brand new RB110 tonearm, the Planar 1 is set up in seconds after unpacking. Simply slide the balance weight onto the rear of the tonearm as far as it will go, remove the stylus guard and start spinning your favourite vinyl.

    Performance beyond price
    Every single aspect of the Planar 1 has been meticulously designed to improve performance. For the first time the Planar 1 is now running a 24v, low noise, synchronous motor to reduce vibration transfer combined with our brand new RB110 tonearm fitted with Rega's bespoke zero play bearings. Only sharing the drive belt, sub platter and dust cover from the outgoing RP1, this is truly a new turntable for 2016.

    If you are looking to get back into vinyl and want serious performance that will last you a lifetime, then look no further.

    FUNKCIJOS

    Tonearm
    Brand new RB110 tonearm built with the new Rega designed, bespoke, zero play bearings with ultra-low friction performance (Patent Pending). New bias assembly and integrated arm clip. Includes automatic bias adjustment negating the need for the user to set bias, making this the most ‘Plug & Play’ turntable we have ever manufactured. New ergonomically, re-designed and stiffer headshell for improved usability and appearance.

    Cartridge
    Rega Carbon cartridge supplied fitted as standard.

    24v synchronous motor
    The first entry level Rega turntable to use a 24v, synchronous AC motor with a new motor PCB and aluminium pulley offering low noise and better speed stability.

    Plinth
    Brand new Thermoset, gloss laminated plinth with vastly improved appearance and new ergonomically positioned on/off switch located on the underside. Two stunning plinth finishes available, gloss black and gloss white.

    Central Bearing housing
    Re-designed brass main bearing, offering improved fit and removing stress on the bearing itself whilst minimising the transfer of potential energy. (Patent pending)

    Platter
    Brand new, 23mm, higher mass, phenolic platter with improved flywheel effect for improved speed stability.

    Re-Designed feet
    New improved feet to increase stability and reduce vibration transfer.

    Motor cover tray
    New motor cover tray with integrated cooling.

    Balance Weight
    New 111g ‘Plug and Play’ balance weight.

    DOKUMENTAI

    Vartotojo vadovas

    APDOVANOJIMAI

    Spalva

    Žiūrėti produktą

    • Gyvas pokalbis

      Ekspertų nuomonė ir patarimai

    • Pristatymas

      Lietuvoje per 1-2 d.d.

    • Darbo valandos

      Darbo dienomis 9.00 - 18.00

    • Atsiskaitymas

      Patogiausi būdai internetu
    Atgal į viršų
    • Naujausias RB110 tonarmas ir Carbon galvutė
    • 24V mažatriukšmis sinchroninis variklis
    • Tonarme panaudoti dar tikslesni mažesnės trinties patentuoti guoliai
    • Naujas 23mm storio didesnės masės diskas iš fenolio
    • Blizgiu akrilu laminuotas korpusas

     

    The new Planar 1 is the most user friendly Rega turntable to date. Now with preset bias force on the brand new RB110 tonearm, the Planar 1 is set up in seconds after unpacking. Simply slide the balance weight onto the rear of the tonearm as far as it will go, remove the stylus guard and start spinning your favourite vinyl.

    Performance beyond price
    Every single aspect of the Planar 1 has been meticulously designed to improve performance. For the first time the Planar 1 is now running a 24v, low noise, synchronous motor to reduce vibration transfer combined with our brand new RB110 tonearm fitted with Rega's bespoke zero play bearings. Only sharing the drive belt, sub platter and dust cover from the outgoing RP1, this is truly a new turntable for 2016.

    If you are looking to get back into vinyl and want serious performance that will last you a lifetime, then look no further.

    Tonearm
    Brand new RB110 tonearm built with the new Rega designed, bespoke, zero play bearings with ultra-low friction performance (Patent Pending). New bias assembly and integrated arm clip. Includes automatic bias adjustment negating the need for the user to set bias, making this the most ‘Plug & Play’ turntable we have ever manufactured. New ergonomically, re-designed and stiffer headshell for improved usability and appearance.

    Cartridge
    Rega Carbon cartridge supplied fitted as standard.

    24v synchronous motor
    The first entry level Rega turntable to use a 24v, synchronous AC motor with a new motor PCB and aluminium pulley offering low noise and better speed stability.

    Plinth
    Brand new Thermoset, gloss laminated plinth with vastly improved appearance and new ergonomically positioned on/off switch located on the underside. Two stunning plinth finishes available, gloss black and gloss white.

    Central Bearing housing
    Re-designed brass main bearing, offering improved fit and removing stress on the bearing itself whilst minimising the transfer of potential energy. (Patent pending)

    Platter
    Brand new, 23mm, higher mass, phenolic platter with improved flywheel effect for improved speed stability.

    Re-Designed feet
    New improved feet to increase stability and reduce vibration transfer.

    Motor cover tray
    New motor cover tray with integrated cooling.

    Balance Weight
    New 111g ‘Plug and Play’ balance weight.

    Vartotojo vadovas