1 3
Monitor Audio

Monitor Audio IV140, sieninė garso kolonėlė

715.00 €

Monitor Audio IV140, sieninė garso kolonėlė yra užsakytas ir bus išsiųstas, kai tik bus sandėlyje.

Siuntimas ir pristatymas

Prekes visoje Lietuvoje (išskyrus Kuršių Neriją) pristato skubių siuntų tarnyba "Venipak" per 1-2 darbo dienas, tiesiai į namus ar darbovietę. Pristatymas yra nemokamas, jeigu prekių suma viršija 100€, kitu atveju taikomas 4,99€ pristatymo mokestis. Kurjeris pieš atveždamas prekes su Jumis susisieks Jūsų nurodytu telefono numeriu ir suderins pristatymo laiką.

Monitor Audio IV140 tai į sieną montuojama ir po apdaila paslepiama garso kolonėlė. Kolonėlė perteikia visas geriausios gamintojo akustines savybes!

  • Rekomenduojama stiprintuvo galia: 20-50W.
  • Dažnių juosta: 75 Hz — 18 kHz (sumontuotos).
  • Jautrumas: 82 dB.
  • Varža: 8 Omai.

 

Concealed in-wall or in-ceilings, the speaker fits into all conventional 4" stud bays, leaving enough room for cabling. Once installed and skimmed with plaster, the speaker is completely out of sight, with paint, light wallpaper or fabric hiding it from view.

A large low-frequency transducer and two high frequency transducers provide punchy, high power bass and sound vibration. This two-way transducer design also features an integrated crossover to generate a wider frequency range and deliver crystal clear sound quality with smoother overall balance and character.

An integrated back box design isolates sound and ensures consistent, controlled performance. This rigid back box reduces sound emitted from the rear of the speaker, minimising leakage into other rooms.

Monitor Audio’s IV140 is protected against overload by automatic re-setting circuit breakers (PTC). These will attenuate output for a specific time period to allow the system to cool until normal operation can safely resume.

Technology
  • 2-way system with integrated crossover
  • Pre-construction speaker designed to be plastered in to create ‘invisible’ appearance
  • Low-frequency transducer, featuring high power ceramic magnetics and 40 mm voice coil
  • Dual High-frequency transducers, incorporating high power Neo magnets and 30 mm voice coils
  • Rigid MDF back box construction
  • Integrated ‘hybrid’ controlled performance back box system – Fully sealed or open-back
  • High Quality crossover – including metallised film capacitors and low loss steel core inductors
  • Protected against overload by PTC’s (automatically re-setting breakers)
  • Ideal for home cinema, distributed audio, hospitality, retail and commercial background music applications (where visible discretion is key)

      SPECIFIKACIJOS

      Fequency Response (-6 dB)

      75 Hz — 18 kHz (CP sealed)
      55 Hz — 18 kHz (Open back)
      Sensitivity (1W@1M)

      82 dB (when installed as directed)
      Nominal Impedance

      8 ohms
      Maximum SPL

      102.8 dBA
      Power Handling (RMS)

      50 Watts (full range – IEC268-5 rating)
      100 Watts Music program (Using Minimum 80Hz High Pass filter)
      Recommended Amplifier Requirements

      20-50 Watts (full range)
      20-100 Watts (Using Minimum 80 Hz High Pass filter)
      Drive Unit Complement

      1 x Low-Frequency transducer
      2 x High-Frequency transducer
      Overall Dimensions (Including Grille (H x W x D))

      642 x 401.5 mm (251/4 x 1513/16")
      Overall Depth

      106 mm (43/16")
      Cut-Out Dimensions

      591 x 350.5 mm (231/4 x 1313/16")
      Mounting Depth

      94 mm (311/16")
      Connection

      Sprung push type terminals – Gold plated
      Fixing Type

      Self-tapping screw
      Construction Material

      9 mm MDF
      Colour / Finish

      Black painted, white membrane
      Weight

      9 kg (20 lb)
      Sold As

      Single Unit

      INSTRUKCIJOS

      User Manual (EN).

      Kategorijos

      Monitor Audio IV140, sieninė garso kolonėlė
      Monitor Audio

      Monitor Audio IV140, sieninė garso kolonėlė

      715.00 €

      Monitor Audio IV140 tai į sieną montuojama ir po apdaila paslepiama garso kolonėlė. Kolonėlė perteikia visas geriausios gamintojo akustines savybes!

       

      APRAŠYMAS

      Concealed in-wall or in-ceilings, the speaker fits into all conventional 4" stud bays, leaving enough room for cabling. Once installed and skimmed with plaster, the speaker is completely out of sight, with paint, light wallpaper or fabric hiding it from view.

      A large low-frequency transducer and two high frequency transducers provide punchy, high power bass and sound vibration. This two-way transducer design also features an integrated crossover to generate a wider frequency range and deliver crystal clear sound quality with smoother overall balance and character.

      An integrated back box design isolates sound and ensures consistent, controlled performance. This rigid back box reduces sound emitted from the rear of the speaker, minimising leakage into other rooms.

      Monitor Audio’s IV140 is protected against overload by automatic re-setting circuit breakers (PTC). These will attenuate output for a specific time period to allow the system to cool until normal operation can safely resume.

      Technology

      • 2-way system with integrated crossover
      • Pre-construction speaker designed to be plastered in to create ‘invisible’ appearance
      • Low-frequency transducer, featuring high power ceramic magnetics and 40 mm voice coil
      • Dual High-frequency transducers, incorporating high power Neo magnets and 30 mm voice coils
      • Rigid MDF back box construction
      • Integrated ‘hybrid’ controlled performance back box system – Fully sealed or open-back
      • High Quality crossover – including metallised film capacitors and low loss steel core inductors
      • Protected against overload by PTC’s (automatically re-setting breakers)
      • Ideal for home cinema, distributed audio, hospitality, retail and commercial background music applications (where visible discretion is key)

      TECHNINIAI DUOMENYS

      SPECIFIKACIJOS

      Fequency Response (-6 dB)

      75 Hz — 18 kHz (CP sealed)
      55 Hz — 18 kHz (Open back)

      Sensitivity (1W@1M)

      82 dB (when installed as directed)

      Nominal Impedance

      8 ohms

      Maximum SPL

      102.8 dBA

      Power Handling (RMS)

      50 Watts (full range – IEC268-5 rating)
      100 Watts Music program (Using Minimum 80Hz High Pass filter)

      Recommended Amplifier Requirements

      20-50 Watts (full range)
      20-100 Watts (Using Minimum 80 Hz High Pass filter)

      Drive Unit Complement

      1 x Low-Frequency transducer
      2 x High-Frequency transducer

      Overall Dimensions (Including Grille (H x W x D))

      642 x 401.5 mm (251/4 x 1513/16")

      Overall Depth

      106 mm (43/16")

      Cut-Out Dimensions

      591 x 350.5 mm (231/4 x 1313/16")

      Mounting Depth

      94 mm (311/16")

      Connection

      Sprung push type terminals – Gold plated

      Fixing Type

      Self-tapping screw

      Construction Material

      9 mm MDF

      Colour / Finish

      Black painted, white membrane

      Weight

      9 kg (20 lb)

      Sold As

      Single Unit

      DOKUMENTAI

      INSTRUKCIJOS

      User Manual (EN).

      Žiūrėti produktą

      • Gyvas pokalbis

        Ekspertų nuomonė ir patarimai

      • Pristatymas

        Lietuvoje per 1-2 d.d.

      • Darbo valandos

        Darbo dienomis 9.00 - 18.00

      • Atsiskaitymas

        Patogiausi būdai internetu
      Atgal į viršų

      Monitor Audio IV140 tai į sieną montuojama ir po apdaila paslepiama garso kolonėlė. Kolonėlė perteikia visas geriausios gamintojo akustines savybes!

      • Rekomenduojama stiprintuvo galia: 20-50W.
      • Dažnių juosta: 75 Hz — 18 kHz (sumontuotos).
      • Jautrumas: 82 dB.
      • Varža: 8 Omai.

       

      Concealed in-wall or in-ceilings, the speaker fits into all conventional 4" stud bays, leaving enough room for cabling. Once installed and skimmed with plaster, the speaker is completely out of sight, with paint, light wallpaper or fabric hiding it from view.

      A large low-frequency transducer and two high frequency transducers provide punchy, high power bass and sound vibration. This two-way transducer design also features an integrated crossover to generate a wider frequency range and deliver crystal clear sound quality with smoother overall balance and character.

      An integrated back box design isolates sound and ensures consistent, controlled performance. This rigid back box reduces sound emitted from the rear of the speaker, minimising leakage into other rooms.

      Monitor Audio’s IV140 is protected against overload by automatic re-setting circuit breakers (PTC). These will attenuate output for a specific time period to allow the system to cool until normal operation can safely resume.

      Technology
      • 2-way system with integrated crossover
      • Pre-construction speaker designed to be plastered in to create ‘invisible’ appearance
      • Low-frequency transducer, featuring high power ceramic magnetics and 40 mm voice coil
      • Dual High-frequency transducers, incorporating high power Neo magnets and 30 mm voice coils
      • Rigid MDF back box construction
      • Integrated ‘hybrid’ controlled performance back box system – Fully sealed or open-back
      • High Quality crossover – including metallised film capacitors and low loss steel core inductors
      • Protected against overload by PTC’s (automatically re-setting breakers)
      • Ideal for home cinema, distributed audio, hospitality, retail and commercial background music applications (where visible discretion is key)

          SPECIFIKACIJOS

          Fequency Response (-6 dB)

          75 Hz — 18 kHz (CP sealed)
          55 Hz — 18 kHz (Open back)
          Sensitivity (1W@1M)

          82 dB (when installed as directed)
          Nominal Impedance

          8 ohms
          Maximum SPL

          102.8 dBA
          Power Handling (RMS)

          50 Watts (full range – IEC268-5 rating)
          100 Watts Music program (Using Minimum 80Hz High Pass filter)
          Recommended Amplifier Requirements

          20-50 Watts (full range)
          20-100 Watts (Using Minimum 80 Hz High Pass filter)
          Drive Unit Complement

          1 x Low-Frequency transducer
          2 x High-Frequency transducer
          Overall Dimensions (Including Grille (H x W x D))

          642 x 401.5 mm (251/4 x 1513/16")
          Overall Depth

          106 mm (43/16")
          Cut-Out Dimensions

          591 x 350.5 mm (231/4 x 1313/16")
          Mounting Depth

          94 mm (311/16")
          Connection

          Sprung push type terminals – Gold plated
          Fixing Type

          Self-tapping screw
          Construction Material

          9 mm MDF
          Colour / Finish

          Black painted, white membrane
          Weight

          9 kg (20 lb)
          Sold As

          Single Unit

          INSTRUKCIJOS

          User Manual (EN).