BOWERS & WILKINS CCM632, į lubas montuojamas garsiakalbis

279.00 €

BOWERS & WILKINS CCM632, į lubas montuojamas garsiakalbis yra užsakytas ir bus išsiųstas, kai tik bus sandėlyje.


Neišsirenkate garso kolonėlių namams? Turime Jums sprendimą!
Kviečiame atvykti garso aparatūros perklausai.

Siuntimas ir pristatymas

Prekes visoje Lietuvoje (išskyrus Kuršių Neriją) pristato skubių siuntų tarnyba "Venipak" per 1-2 darbo dienas, tiesiai į namus ar darbovietę. Pristatymas yra nemokamas, jeigu prekių suma viršija 100€, kitu atveju taikomas 4,99€ pristatymo mokestis. Kurjeris pieš atveždamas prekes su Jumis susisieks Jūsų nurodytu telefono numeriu ir suderins pristatymo laiką.

 

Į lubas montuojamas 75mm 3" garsiakalbis. Puikus kainos ir kokybės santykis norintiems itin kokybiško garso už protingą kainą.

  • Galia: 60W.
  • 75mm 3" plačiajuostis garsiakalbis
  • Dažnių juosta: 100Hz – 17kHz.
  • Jautrumas: 84dB (2.83V, 1m).
  • Varža: 8 omai.
  • Montavimo Dia 120mm 

 

In-ceiling speakers, designed to squeeze into small spaces or be used in multiples for diffuse, background sound, are really difficult to get right. If the driver’s too small, there won’t be enough bass without adding a bulky subwoofer, but the common alternative is a 2-way where the tweeter sits in front of a small bass/midrange driver. The problem with these is the driver fires around the tweeter’s body, inevitably leading to colouration. The new Bowers & Wilkins CCM632 is a single 75mm (3inch) full-range driver with a beautifully wellbalanced sound, that sidesteps traditional small speaker issues yet still takes up less than 150mm (6”) diameter space installed. The CCM632 also features Bowers & Wilkins new and innovative ZipDogs™ fixing method. These make short work of installation and cope with almost any thickness of mounting panel. Each speaker comes with an integral enclosure to minimise acoustic bleed into adjoining spaces. Speakers are supplied in pairs, with each pack including round and square magnetically fixed, and fully customisable, grille/bezel assemblies.

 

SPECIFIKACIJOS

Description

Single driver in-ceiling system

Drive Units

1x Ø75mm (3 in) paper cone full-range

Frequency range (-6dB)

100Hz – 17kHz

Frequency response (+/-3dB)

112Hz - 16kHz

Recommended Amplifier Power

10W – 60W

Sensitivity

84dB (2.83V, 1m)

Nominal Impedance

8Ω (5Ω minimum)

Frame

Ø147mm (5.8 in)

Cut-out

Ø120mm (4¾ in)

Depth behind surface

100mm (4 in)

Protrusion

5.5mm (0.22 in)

Pre-mount Kit

PMK C3

Back Box

Integral

Grille Options

Square and round grilles included

 

BOWERS & WILKINS CCM632, į lubas montuojamas garsiakalbis
Bowers & Wilkins

BOWERS & WILKINS CCM632, į lubas montuojamas garsiakalbis

279.00 €

 

Į lubas montuojamas 75mm 3" garsiakalbis. Puikus kainos ir kokybės santykis norintiems itin kokybiško garso už protingą kainą.

 

APRAŠYMAS

In-ceiling speakers, designed to squeeze into small spaces or be used in multiples for diffuse, background sound, are really difficult to get right. If the driver’s too small, there won’t be enough bass without adding a bulky subwoofer, but the common alternative is a 2-way where the tweeter sits in front of a small bass/midrange driver. The problem with these is the driver fires around the tweeter’s body, inevitably leading to colouration. The new Bowers & Wilkins CCM632 is a single 75mm (3inch) full-range driver with a beautifully wellbalanced sound, that sidesteps traditional small speaker issues yet still takes up less than 150mm (6”) diameter space installed. The CCM632 also features Bowers & Wilkins new and innovative ZipDogs™ fixing method. These make short work of installation and cope with almost any thickness of mounting panel. Each speaker comes with an integral enclosure to minimise acoustic bleed into adjoining spaces. Speakers are supplied in pairs, with each pack including round and square magnetically fixed, and fully customisable, grille/bezel assemblies.

 

TECHNINIAI DUOMENYS

SPECIFIKACIJOS

Description

Single driver in-ceiling system

Drive Units

1x Ø75mm (3 in) paper cone full-range

Frequency range (-6dB)

100Hz – 17kHz

Frequency response (+/-3dB)

112Hz - 16kHz

Recommended Amplifier Power

10W – 60W

Sensitivity

84dB (2.83V, 1m)

Nominal Impedance

8Ω (5Ω minimum)

Frame

Ø147mm (5.8 in)

Cut-out

Ø120mm (4¾ in)

Depth behind surface

100mm (4 in)

Protrusion

5.5mm (0.22 in)

Pre-mount Kit

PMK C3

Back Box

Integral

Grille Options

Square and round grilles included

 

DOKUMENTAI


User Manual (EN).

Žiūrėti produktą

 

Į lubas montuojamas 75mm 3" garsiakalbis. Puikus kainos ir kokybės santykis norintiems itin kokybiško garso už protingą kainą.

  • Galia: 60W.
  • 75mm 3" plačiajuostis garsiakalbis
  • Dažnių juosta: 100Hz – 17kHz.
  • Jautrumas: 84dB (2.83V, 1m).
  • Varža: 8 omai.
  • Montavimo Dia 120mm 

 

In-ceiling speakers, designed to squeeze into small spaces or be used in multiples for diffuse, background sound, are really difficult to get right. If the driver’s too small, there won’t be enough bass without adding a bulky subwoofer, but the common alternative is a 2-way where the tweeter sits in front of a small bass/midrange driver. The problem with these is the driver fires around the tweeter’s body, inevitably leading to colouration. The new Bowers & Wilkins CCM632 is a single 75mm (3inch) full-range driver with a beautifully wellbalanced sound, that sidesteps traditional small speaker issues yet still takes up less than 150mm (6”) diameter space installed. The CCM632 also features Bowers & Wilkins new and innovative ZipDogs™ fixing method. These make short work of installation and cope with almost any thickness of mounting panel. Each speaker comes with an integral enclosure to minimise acoustic bleed into adjoining spaces. Speakers are supplied in pairs, with each pack including round and square magnetically fixed, and fully customisable, grille/bezel assemblies.

 

SPECIFIKACIJOS

Description

Single driver in-ceiling system

Drive Units

1x Ø75mm (3 in) paper cone full-range

Frequency range (-6dB)

100Hz – 17kHz

Frequency response (+/-3dB)

112Hz - 16kHz

Recommended Amplifier Power

10W – 60W

Sensitivity

84dB (2.83V, 1m)

Nominal Impedance

8Ω (5Ω minimum)

Frame

Ø147mm (5.8 in)

Cut-out

Ø120mm (4¾ in)

Depth behind surface

100mm (4 in)

Protrusion

5.5mm (0.22 in)

Pre-mount Kit

PMK C3

Back Box

Integral

Grille Options

Square and round grilles included