Monitor Audio CP-IW460X, sieninis garsiakalbis

2,180.00 €

Monitor Audio CP-IW460X, sieninis garsiakalbis yra užsakytas ir bus išsiųstas, kai tik bus sandėlyje.


Neišsirenkate garso kolonėlių namams? Turime Jums sprendimą!
Kviečiame atvykti garso aparatūros perklausai.

Siuntimas ir pristatymas

Prekes visoje Lietuvoje (išskyrus Kuršių Neriją) pristato skubių siuntų tarnyba "Venipak" per 1-2 darbo dienas, tiesiai į namus ar darbovietę. Pristatymas yra nemokamas, jeigu prekių suma viršija 100€, kitu atveju taikomas 4,99€ pristatymo mokestis. Kurjeris pieš atveždamas prekes su Jumis susisieks Jūsų nurodytu telefono numeriu ir suderins pristatymo laiką.

3-jų juostų į sieną montuojamas garsiakalbis iš Monitor Audio.  Garsiakalbis demonstruoja viena geriausių našumo rodiklių savo klasėje ir yra bene geriausiai skambantis variantas!

  • Galia: 150 W.
  • Dažnių juosta: 50 Hz – 60 kHz.
  • Jautrumas: 89 dB.
  • Varža: 6 Omai.

Technology

  • Dual 6.5” C-CAM bass drivers featuring RST ‘dimpled’ cone technology
  • Die-cast alloy bass driver chassis provides rigidity; results in punch bass and clean mid-range performance due to reduced transfer of vibrations
  • Dual 4” C-CAM mid-range drivers featuring RST ‘dimpled’ cone and underhung voice coil technologies
  • C-CAM Ribbon High Frequency transducer
  • Innovative HF rotating system to facilitate portrait or landscape orientation
  • Integrated back-box to provide rear sound isolation resulting in ‘controlled performance’
  • Cast Polymer enclosure – designed to provide high degree of rigidity and acoustic damping properties
  • High overall efficiency and maximum SPL for powerful home theatre installations
  • High power handling
  • Three-way design in a symmetrical ‘B-M-T-M-B’ configuration
  • High-end crossover design – featuring low loss inductors and audiophile grade Polypropylene capacitors
  • Patented Tri-Grip fixing system is easier to install than conventional clamping systems providing three times the surface area and improved sealing
  • Trim-less, low profile magnetic grilles provide attractive, discreet visual aspect and easy installation and servicing

SPECIFIKACIJOS

Frequency Response

50 Hz – 60 kHz (-6 dB typical in room response)

Nominal Impedance

6 ohms

Sensitivity (1W@1M)

89 dB

Maximum SPL

113.8 dBA

Power Handling (RMS)

150 W

Recommended Amplifier Requirements

60 – 150 W

Crossover Frequency

L.F - 500 Hz @ 12 dB/Octave M.F -500 Hz @ 12 dB/Octave. 3 kHz @ 18 dB/Octave H.F - 3 kHz @ 18 dB/Octave

Drive Unit Complement

2 x 6.5” C-CAM Bass drivers with RST cone technology
2 x 4” C-CAM Mid-range drivers with RST cone technology
1 x C-CAM H.F ribbon transducer

Adjustment Controls

Boundary Compensation (On/Off)
MF Level: +1/0/-1 (dB)
HF Level: +1/0/-1 (dB)

Overall Dimensions (H x W x D)

907 x 257 mm (353/4 x 101/8")

Overall Depth (Including Grille)

102 mm (4")

Cut-Out Dimensions

880 x 230 mm (3421/32 x 9")

Mounting Depth

96 mm (33/4")

Fixing Type

10 x Tri-Grip Dog leg fixings

Construction Material

Cast Polymer enclosure with die-cast Aluminium baffle (RoHS2 Compliant)

Weight

12.98 kg (28 lb 6 oz)

Pre-Construction Bracket

WB12 Pre-Construction Bracket (Green)

Sold As

Single Unit


INSTRUKCIJOS

User Manual (EN).
Monitor Audio CP-IW460X, sieninis garsiakalbis
Monitor Audio

Monitor Audio CP-IW460X, sieninis garsiakalbis

2,180.00 €

3-jų juostų į sieną montuojamas garsiakalbis iš Monitor Audio.  Garsiakalbis demonstruoja viena geriausių našumo rodiklių savo klasėje ir yra bene geriausiai skambantis variantas!

APRAŠYMAS

Technology

  • Dual 6.5” C-CAM bass drivers featuring RST ‘dimpled’ cone technology
  • Die-cast alloy bass driver chassis provides rigidity; results in punch bass and clean mid-range performance due to reduced transfer of vibrations
  • Dual 4” C-CAM mid-range drivers featuring RST ‘dimpled’ cone and underhung voice coil technologies
  • C-CAM Ribbon High Frequency transducer
  • Innovative HF rotating system to facilitate portrait or landscape orientation
  • Integrated back-box to provide rear sound isolation resulting in ‘controlled performance’
  • Cast Polymer enclosure – designed to provide high degree of rigidity and acoustic damping properties
  • High overall efficiency and maximum SPL for powerful home theatre installations
  • High power handling
  • Three-way design in a symmetrical ‘B-M-T-M-B’ configuration
  • High-end crossover design – featuring low loss inductors and audiophile grade Polypropylene capacitors
  • Patented Tri-Grip fixing system is easier to install than conventional clamping systems providing three times the surface area and improved sealing
  • Trim-less, low profile magnetic grilles provide attractive, discreet visual aspect and easy installation and servicing

TECHNINIAI DUOMENYS

SPECIFIKACIJOS

Frequency Response

50 Hz – 60 kHz (-6 dB typical in room response)

Nominal Impedance

6 ohms

Sensitivity (1W@1M)

89 dB

Maximum SPL

113.8 dBA

Power Handling (RMS)

150 W

Recommended Amplifier Requirements

60 – 150 W

Crossover Frequency

L.F - 500 Hz @ 12 dB/Octave M.F -500 Hz @ 12 dB/Octave. 3 kHz @ 18 dB/Octave H.F - 3 kHz @ 18 dB/Octave

Drive Unit Complement

2 x 6.5” C-CAM Bass drivers with RST cone technology
2 x 4” C-CAM Mid-range drivers with RST cone technology
1 x C-CAM H.F ribbon transducer

Adjustment Controls

Boundary Compensation (On/Off)
MF Level: +1/0/-1 (dB)
HF Level: +1/0/-1 (dB)

Overall Dimensions (H x W x D)

907 x 257 mm (353/4 x 101/8")

Overall Depth (Including Grille)

102 mm (4")

Cut-Out Dimensions

880 x 230 mm (3421/32 x 9")

Mounting Depth

96 mm (33/4")

Fixing Type

10 x Tri-Grip Dog leg fixings

Construction Material

Cast Polymer enclosure with die-cast Aluminium baffle (RoHS2 Compliant)

Weight

12.98 kg (28 lb 6 oz)

Pre-Construction Bracket

WB12 Pre-Construction Bracket (Green)

Sold As

Single Unit


DOKUMENTAI

INSTRUKCIJOS

User Manual (EN).
Žiūrėti produktą

3-jų juostų į sieną montuojamas garsiakalbis iš Monitor Audio.  Garsiakalbis demonstruoja viena geriausių našumo rodiklių savo klasėje ir yra bene geriausiai skambantis variantas!

  • Galia: 150 W.
  • Dažnių juosta: 50 Hz – 60 kHz.
  • Jautrumas: 89 dB.
  • Varža: 6 Omai.

Technology

  • Dual 6.5” C-CAM bass drivers featuring RST ‘dimpled’ cone technology
  • Die-cast alloy bass driver chassis provides rigidity; results in punch bass and clean mid-range performance due to reduced transfer of vibrations
  • Dual 4” C-CAM mid-range drivers featuring RST ‘dimpled’ cone and underhung voice coil technologies
  • C-CAM Ribbon High Frequency transducer
  • Innovative HF rotating system to facilitate portrait or landscape orientation
  • Integrated back-box to provide rear sound isolation resulting in ‘controlled performance’
  • Cast Polymer enclosure – designed to provide high degree of rigidity and acoustic damping properties
  • High overall efficiency and maximum SPL for powerful home theatre installations
  • High power handling
  • Three-way design in a symmetrical ‘B-M-T-M-B’ configuration
  • High-end crossover design – featuring low loss inductors and audiophile grade Polypropylene capacitors
  • Patented Tri-Grip fixing system is easier to install than conventional clamping systems providing three times the surface area and improved sealing
  • Trim-less, low profile magnetic grilles provide attractive, discreet visual aspect and easy installation and servicing

SPECIFIKACIJOS

Frequency Response

50 Hz – 60 kHz (-6 dB typical in room response)

Nominal Impedance

6 ohms

Sensitivity (1W@1M)

89 dB

Maximum SPL

113.8 dBA

Power Handling (RMS)

150 W

Recommended Amplifier Requirements

60 – 150 W

Crossover Frequency

L.F - 500 Hz @ 12 dB/Octave M.F -500 Hz @ 12 dB/Octave. 3 kHz @ 18 dB/Octave H.F - 3 kHz @ 18 dB/Octave

Drive Unit Complement

2 x 6.5” C-CAM Bass drivers with RST cone technology
2 x 4” C-CAM Mid-range drivers with RST cone technology
1 x C-CAM H.F ribbon transducer

Adjustment Controls

Boundary Compensation (On/Off)
MF Level: +1/0/-1 (dB)
HF Level: +1/0/-1 (dB)

Overall Dimensions (H x W x D)

907 x 257 mm (353/4 x 101/8")

Overall Depth (Including Grille)

102 mm (4")

Cut-Out Dimensions

880 x 230 mm (3421/32 x 9")

Mounting Depth

96 mm (33/4")

Fixing Type

10 x Tri-Grip Dog leg fixings

Construction Material

Cast Polymer enclosure with die-cast Aluminium baffle (RoHS2 Compliant)

Weight

12.98 kg (28 lb 6 oz)

Pre-Construction Bracket

WB12 Pre-Construction Bracket (Green)

Sold As

Single Unit


INSTRUKCIJOS

User Manual (EN).