1 8
HDL

Šviesos reguliatorius HDL-MDT0203.433, 2x3A

359.00 €

Siuntimas ir pristatymas

Prekes visoje Lietuvoje (išskyrus Kuršių Neriją) pristato skubių siuntų tarnyba "Venipak" per 1-2 darbo dienas, tiesiai į namus ar darbovietę. Pristatymas yra nemokamas, jeigu prekių suma viršija 100€, kitu atveju taikomas 4,99€ pristatymo mokestis. Kurjeris pieš atveždamas prekes su Jumis susisieks Jūsų nurodytu telefono numeriu ir suderins pristatymo laiką.

The HDL-MDT0203.433 is a MOSFET dimmer which supports leading edge and trailing edge dimming. Four selectable dimming curves are available, and the module is able to control inductive, resistive, and capacitive loads. Immediate controlling is possible via on-board manual buttons.

  • Each output channel has LED indicator for status and manual switch
  • Maximum 2 separate areas, and maximum 12 scenes can be set for each area
  • Maximum 6 sequences, and 12 steps for each sequence
  • Low Threshold, High Threshold, Maximum Threshold are all available for each channel
  • You can select specified scene or scene before power off when the device restarts
  • Short circuit and over heat protection
  • 4 dimming curves
  • Supports online upgrading

         

        Elektriniai parametrai:

        • Power input: AC110/240V
        • Working power: DC12~30V
        • Power consumption: 25mA/DC24V
        • Output channel: 2CH/3A
        • Maximum output channel current in total: 6A
        • Dimming mode: Leading edge, trailing edge
        • Dimming curves: Linear, 1.5 exponent, 2.0 exponent, 3.0 exponent

              Patvirtinta:

              • CE
              • RoHS

              Produkto informacija:

              • Dimensions: 216×90×66 (mm)
              • Weight: 851.5(g)
              • Housing material: nylon,PC
              • Installation: 35mm DIN rail installation

                    Product Description
                    The HDL-MDT0203.433 is a MOSFET dimmer which supports leading edge and trailing edge dimming. Four selectable dimming curves are available, and the module is able to control inductive, resistive, and capacitive loads. Immediate controlling is possible via on-board manual buttons.

                    Different load Types
                    Both leading and trailing edge modes are available. The leading edge supports both Inductive loads and resistive loads, while the trailing edge supports capacitive loads and resistive loads. This enables the operation of incandescent bulbs, motors, and dimmable LED lamps.

                    Selectable Dimming Curves
                    With 4 different dimming curves, and a dimming accuracy of 512 steps, the dimming actuator operates smoothly giving total control to the end user.

                    Protection
                    To prevent damage to the system and unit a variety of protective features are included. With an over heat sink, electronic short circuit protection, internal overheat protection, and overload protection, safety is guaranteed.

                    Scene Recovery
                    When the dimmer has been powered off, it is able to automatically restore the last scene used when powered on again. This gives the user a system that remembers their previous scene, and requires no further control.

                    Manual control
                    With the ability to bypass the main control interface, and manually control each channel, this unit gives an end user the ability to adjust and switch the dimming controller on & off.

                    Duomenų lapas

                    Kategorijos

                    Šviesos reguliatorius HDL-MDT0203.433, 2x3A Išmanūs namai HDL AUTOGARSAS.LT
                    HDL

                    Šviesos reguliatorius HDL-MDT0203.433, 2x3A

                    359.00 €

                    The HDL-MDT0203.433 is a MOSFET dimmer which supports leading edge and trailing edge dimming. Four selectable dimming curves are available, and the module is able to control inductive, resistive, and capacitive loads. Immediate controlling is possible via on-board manual buttons.

                    VIDEO

                    TECHNINIAI DUOMENYS

                    Elektriniai parametrai:

                    Patvirtinta:

                    Produkto informacija:

                    APRAŠYMAS

                    Product Description
                    The HDL-MDT0203.433 is a MOSFET dimmer which supports leading edge and trailing edge dimming. Four selectable dimming curves are available, and the module is able to control inductive, resistive, and capacitive loads. Immediate controlling is possible via on-board manual buttons.

                    Different load Types
                    Both leading and trailing edge modes are available. The leading edge supports both Inductive loads and resistive loads, while the trailing edge supports capacitive loads and resistive loads. This enables the operation of incandescent bulbs, motors, and dimmable LED lamps.

                    Selectable Dimming Curves
                    With 4 different dimming curves, and a dimming accuracy of 512 steps, the dimming actuator operates smoothly giving total control to the end user.

                    Protection
                    To prevent damage to the system and unit a variety of protective features are included. With an over heat sink, electronic short circuit protection, internal overheat protection, and overload protection, safety is guaranteed.

                    Scene Recovery
                    When the dimmer has been powered off, it is able to automatically restore the last scene used when powered on again. This gives the user a system that remembers their previous scene, and requires no further control.

                    Manual control
                    With the ability to bypass the main control interface, and manually control each channel, this unit gives an end user the ability to adjust and switch the dimming controller on & off.

                    DOKUMENTAI

                    Duomenų lapas

                    Žiūrėti produktą

                    • Gyvas pokalbis

                      Ekspertų nuomonė ir patarimai

                    • Pristatymas

                      Lietuvoje per 1-2 d.d.

                    • Darbo valandos

                      Darbo dienomis 9.00 - 18.00

                    • Atsiskaitymas

                      Patogiausi būdai internetu
                    Atgal į viršų

                    The HDL-MDT0203.433 is a MOSFET dimmer which supports leading edge and trailing edge dimming. Four selectable dimming curves are available, and the module is able to control inductive, resistive, and capacitive loads. Immediate controlling is possible via on-board manual buttons.

                    • Each output channel has LED indicator for status and manual switch
                    • Maximum 2 separate areas, and maximum 12 scenes can be set for each area
                    • Maximum 6 sequences, and 12 steps for each sequence
                    • Low Threshold, High Threshold, Maximum Threshold are all available for each channel
                    • You can select specified scene or scene before power off when the device restarts
                    • Short circuit and over heat protection
                    • 4 dimming curves
                    • Supports online upgrading

                           

                          Elektriniai parametrai:

                          • Power input: AC110/240V
                          • Working power: DC12~30V
                          • Power consumption: 25mA/DC24V
                          • Output channel: 2CH/3A
                          • Maximum output channel current in total: 6A
                          • Dimming mode: Leading edge, trailing edge
                          • Dimming curves: Linear, 1.5 exponent, 2.0 exponent, 3.0 exponent

                                Patvirtinta:

                                • CE
                                • RoHS

                                Produkto informacija:

                                • Dimensions: 216×90×66 (mm)
                                • Weight: 851.5(g)
                                • Housing material: nylon,PC
                                • Installation: 35mm DIN rail installation

                                      Product Description
                                      The HDL-MDT0203.433 is a MOSFET dimmer which supports leading edge and trailing edge dimming. Four selectable dimming curves are available, and the module is able to control inductive, resistive, and capacitive loads. Immediate controlling is possible via on-board manual buttons.

                                      Different load Types
                                      Both leading and trailing edge modes are available. The leading edge supports both Inductive loads and resistive loads, while the trailing edge supports capacitive loads and resistive loads. This enables the operation of incandescent bulbs, motors, and dimmable LED lamps.

                                      Selectable Dimming Curves
                                      With 4 different dimming curves, and a dimming accuracy of 512 steps, the dimming actuator operates smoothly giving total control to the end user.

                                      Protection
                                      To prevent damage to the system and unit a variety of protective features are included. With an over heat sink, electronic short circuit protection, internal overheat protection, and overload protection, safety is guaranteed.

                                      Scene Recovery
                                      When the dimmer has been powered off, it is able to automatically restore the last scene used when powered on again. This gives the user a system that remembers their previous scene, and requires no further control.

                                      Manual control
                                      With the ability to bypass the main control interface, and manually control each channel, this unit gives an end user the ability to adjust and switch the dimming controller on & off.

                                      Duomenų lapas