1 3
Pro-Ject

Pro-Ject T1, patefonas

369.00 €

Pro-Ject T1, patefonas - Juoda yra užsakytas ir bus išsiųstas, kai tik bus sandėlyje.

Siuntimas ir pristatymas

Prekes visoje Lietuvoje (išskyrus Kuršių Neriją) pristato skubių siuntų tarnyba "Venipak" per 1-2 darbo dienas, tiesiai į namus ar darbovietę. Pristatymas yra nemokamas, jeigu prekių suma viršija 100€, kitu atveju taikomas 4,99€ pristatymo mokestis. Kurjeris pieš atveždamas prekes su Jumis susisieks Jūsų nurodytu telefono numeriu ir suderins pristatymo laiką.

T1 pasžymi tikromis High-End produktams būdingomis funkcijomis. Tikras Audiofilinis garsas- Gera kainą!

  • Galimi greičiai: 33, 45 Aps/Min.
  • Mechaninis greičio keitiklis.
  • Diržinė pavara.
  • Greičio variacijos: 33: 0.25% 45: 0.23%.

 

The stylish CNC-machined plinth of the T1 features no plastic parts and is carefully manufactured to ensure there are no hollow spaces inside, therefore avoiding unwanted vibrations within the chassis. Carrying this philosophy through the design, the glass platter is also a heavy, zero-resonance design. Finally, the purpose-chosen turntable feet also do a good job of isolating the T1 from ambient vibrations around your hi-fi system. In the T1 the motor drives a belt-system, attached to a newly designed sub-platter, which is mounted into an ultra-precise 0.001mm main bearing with a hardened steel axle and brass bushing – just like our Essential III turntables. The tonearm new tonearm has an effective length of 8.6”. This one-piece aluminium tonearm also features low-friction bearings for absolute accuracy in use. The T1 comes with a pre-adjusted Ortofon OM 5E Moving Magnet cartridge and is ready to use right out of the box. Also super shielded, semi-symmetrical, low-capacitance Pro-Ject phono cables are included.

Pakuotėje?:
  • T1 with Ortofon OM 5E cartridge
  • Directly soldered Connect it E Phono Cable
  • Felt mat
  • Dust cover
  • Adapter for 7“ singles
  • Power supply
  • Allen key, stylus pressure gauge

 

Savybės

  • Belt-driven
  • Anti-resonant sub-platter design
  • Heavy 8mm, zero-resonance blasted-glass platter
  • Precision CNC‘d heavy full chassis: NO hollow spaces, NO plastic
  • Ortofon OM5e moving magnet pickup
  • 8,6“ highly precise and light aluminium tonearm
  • Low friction, vibration free tonearm bearing
  • One-piece tonearm design with integrated headshell
  • Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject
  • Vibration absorbing feet
  • Elegant dustcover with adjustable hinges
  • Available in High-Gloss Black, Matt White and Walnut
  • Hand-made in Europe

SPECIFIKACIJOS

Speed 33,45 (manual speed change)
Principle Belt drive
Speed variance 33: 0.7% 45: 0.6%
Wow & Flutter 33: 0.25% 45: 0.23%
Platter Heavy 8mm, blasted-glass platter with felt mat
Main bearing Stainless steel/brass
Signal to noise 65dB
Tonearm 8.6” aluminium
Effective arm length 218.5 mm
Overhang 22.0 mm
Effective tonearm mass 8.0 g
Counterweight for mass 5 - 10g (pre-mounted)
Tracking force range 0 - 50mN (17.5 mN pre-adjusted)
Included accessories dustcover, feltmat
Built-in Power Supply 230V 50Hz (US: 110V 60Hz)
Power consumption 3 Watt max
Dimensions 415x100x335 mm (WxHxD)
Weight 3.8 kg net

 

Naudotojo instrukcija / User manual.

Kategorijos

Pro-Ject T1, patefonas - Balta
Pro-Ject

Pro-Ject T1, patefonas

369.00 €

T1 pasžymi tikromis High-End produktams būdingomis funkcijomis. Tikras Audiofilinis garsas- Gera kainą!

 

APRAŠYMAS

The stylish CNC-machined plinth of the T1 features no plastic parts and is carefully manufactured to ensure there are no hollow spaces inside, therefore avoiding unwanted vibrations within the chassis. Carrying this philosophy through the design, the glass platter is also a heavy, zero-resonance design. Finally, the purpose-chosen turntable feet also do a good job of isolating the T1 from ambient vibrations around your hi-fi system. In the T1 the motor drives a belt-system, attached to a newly designed sub-platter, which is mounted into an ultra-precise 0.001mm main bearing with a hardened steel axle and brass bushing – just like our Essential III turntables. The tonearm new tonearm has an effective length of 8.6”. This one-piece aluminium tonearm also features low-friction bearings for absolute accuracy in use. The T1 comes with a pre-adjusted Ortofon OM 5E Moving Magnet cartridge and is ready to use right out of the box. Also super shielded, semi-symmetrical, low-capacitance Pro-Ject phono cables are included.

Pakuotėje?:
  • T1 with Ortofon OM 5E cartridge
  • Directly soldered Connect it E Phono Cable
  • Felt mat
  • Dust cover
  • Adapter for 7“ singles
  • Power supply
  • Allen key, stylus pressure gauge

 

Savybės

  • Belt-driven
  • Anti-resonant sub-platter design
  • Heavy 8mm, zero-resonance blasted-glass platter
  • Precision CNC‘d heavy full chassis: NO hollow spaces, NO plastic
  • Ortofon OM5e moving magnet pickup
  • 8,6“ highly precise and light aluminium tonearm
  • Low friction, vibration free tonearm bearing
  • One-piece tonearm design with integrated headshell
  • Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject
  • Vibration absorbing feet
  • Elegant dustcover with adjustable hinges
  • Available in High-Gloss Black, Matt White and Walnut
  • Hand-made in Europe

TECHNINIAI DUOMENYS

SPECIFIKACIJOS

Speed 33,45 (manual speed change)
Principle Belt drive
Speed variance 33: 0.7% 45: 0.6%
Wow & Flutter 33: 0.25% 45: 0.23%
Platter Heavy 8mm, blasted-glass platter with felt mat
Main bearing Stainless steel/brass
Signal to noise 65dB
Tonearm 8.6” aluminium
Effective arm length 218.5 mm
Overhang 22.0 mm
Effective tonearm mass 8.0 g
Counterweight for mass 5 - 10g (pre-mounted)
Tracking force range 0 - 50mN (17.5 mN pre-adjusted)
Included accessories dustcover, feltmat
Built-in Power Supply 230V 50Hz (US: 110V 60Hz)
Power consumption 3 Watt max
Dimensions 415x100x335 mm (WxHxD)
Weight 3.8 kg net

 

Naudotojo instrukcija / User manual.

Spalva

Žiūrėti produktą

  • Gyvas pokalbis

    Ekspertų nuomonė ir patarimai

  • Pristatymas

    Lietuvoje per 1-2 d.d.

  • Darbo valandos

    Darbo dienomis 9.00 - 18.00

  • Atsiskaitymas

    Patogiausi būdai internetu
Atgal į viršų

T1 pasžymi tikromis High-End produktams būdingomis funkcijomis. Tikras Audiofilinis garsas- Gera kainą!

  • Galimi greičiai: 33, 45 Aps/Min.
  • Mechaninis greičio keitiklis.
  • Diržinė pavara.
  • Greičio variacijos: 33: 0.25% 45: 0.23%.

 

The stylish CNC-machined plinth of the T1 features no plastic parts and is carefully manufactured to ensure there are no hollow spaces inside, therefore avoiding unwanted vibrations within the chassis. Carrying this philosophy through the design, the glass platter is also a heavy, zero-resonance design. Finally, the purpose-chosen turntable feet also do a good job of isolating the T1 from ambient vibrations around your hi-fi system. In the T1 the motor drives a belt-system, attached to a newly designed sub-platter, which is mounted into an ultra-precise 0.001mm main bearing with a hardened steel axle and brass bushing – just like our Essential III turntables. The tonearm new tonearm has an effective length of 8.6”. This one-piece aluminium tonearm also features low-friction bearings for absolute accuracy in use. The T1 comes with a pre-adjusted Ortofon OM 5E Moving Magnet cartridge and is ready to use right out of the box. Also super shielded, semi-symmetrical, low-capacitance Pro-Ject phono cables are included.

Pakuotėje?:
  • T1 with Ortofon OM 5E cartridge
  • Directly soldered Connect it E Phono Cable
  • Felt mat
  • Dust cover
  • Adapter for 7“ singles
  • Power supply
  • Allen key, stylus pressure gauge

 

Savybės

  • Belt-driven
  • Anti-resonant sub-platter design
  • Heavy 8mm, zero-resonance blasted-glass platter
  • Precision CNC‘d heavy full chassis: NO hollow spaces, NO plastic
  • Ortofon OM5e moving magnet pickup
  • 8,6“ highly precise and light aluminium tonearm
  • Low friction, vibration free tonearm bearing
  • One-piece tonearm design with integrated headshell
  • Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject
  • Vibration absorbing feet
  • Elegant dustcover with adjustable hinges
  • Available in High-Gloss Black, Matt White and Walnut
  • Hand-made in Europe

SPECIFIKACIJOS

Speed 33,45 (manual speed change)
Principle Belt drive
Speed variance 33: 0.7% 45: 0.6%
Wow & Flutter 33: 0.25% 45: 0.23%
Platter Heavy 8mm, blasted-glass platter with felt mat
Main bearing Stainless steel/brass
Signal to noise 65dB
Tonearm 8.6” aluminium
Effective arm length 218.5 mm
Overhang 22.0 mm
Effective tonearm mass 8.0 g
Counterweight for mass 5 - 10g (pre-mounted)
Tracking force range 0 - 50mN (17.5 mN pre-adjusted)
Included accessories dustcover, feltmat
Built-in Power Supply 230V 50Hz (US: 110V 60Hz)
Power consumption 3 Watt max
Dimensions 415x100x335 mm (WxHxD)
Weight 3.8 kg net

 

Naudotojo instrukcija / User manual.