1 3
Audio-Technica

Audio-Technica AT-OC9XEN, kartridžas

339.00 €

Siuntimas ir pristatymas

Prekes visoje Lietuvoje (išskyrus Kuršių Neriją) pristato skubių siuntų tarnyba "Venipak" per 1-2 darbo dienas, tiesiai į namus ar darbovietę. Pristatymas yra nemokamas, jeigu prekių suma viršija 100€, kitu atveju taikomas 4,99€ pristatymo mokestis. Kurjeris pieš atveždamas prekes su Jumis susisieks Jūsų nurodytu telefono numeriu ir suderins pristatymo laiką.

Naujos kartos kartridžas iš legendinės OC9 serijos kartridžas su dviguba judančia rite ir dangteliu.

  • Dažnių juosta: 20 - 30,000 Hz.
  • Kantileveris: Aliuminis.
  • Kanalų atskirtis: 25 dB (1 kHz).
  • DC varža: 12 omų.

 

Since its introduction more than 30 years ago, Audio-Technica’s pioneering moving coil OC9 cartridge series has been prized by demanding vinyl listeners and professional critics alike for its musical transparency, expression of sound and precise construction. Featuring a square shank for accurate stylus alignment and nude diamond for increased fine detail retrieval.

  • Features low mass nude elliptical stylus and aluminium cantilever
  • A neodymium magnet and pure iron yoke provide increased magnetic energy
  • Threaded inserts in the cartridge body enable the cartridge to be mounted on to the headshell or integral tonearm with just two screws – no nuts required 
  • Aluminium body minimizes unwanted vibration for reduced resonance and a superior audio reproduction
  • Pure Copper by Ohno Continuous Casting process (PCOCC) is used for the coils to achieve the purest signal possible

         

        SPECIFIKACIJOS

        Model AT-OC9XEN
        Mounting 1/2” centers / Threaded inserts
        Frequency Response 20 - 30,000 Hz
        Body Material Aluminium
        Channel Separation 25 dB (1 kHz)
        Output Channel Balance 1.5 dB (1 kHz)
        Output Voltage 0.35 mV (@ 1 kHz, 5 cm/sec)
        Vertical Tracking Angle 20 degrees
        Vertical Tracking Force Range 1.8 to 2.2 g (standard 2.0 g)
        Stylus Shape Elliptical Nude
        Stylus Size 0.3 x 0.7 mil
        Stylus Construction Nude square shank
        Cantilever Aluminium pipe
        Coil Impedance 12 Ohms (1 kHz)
        Coil Inductance 25 μH (1 kHz)
        DC Resistance 12 Ohms
        Static Compliance 20 x 10 – 6 cm / dyne
        Dynamic Compliance 9 x 10 – 6 cm / dyne (100 Hz)
        Terminal Pins Brass
        Wire Used for Coil PCOCC (Copper by Ohno Continuous Casting process.)
        Recommended Load Impedance Min 100 Ohms
        Cartridge Weight 7.6 g
        Dimensions 17.3 (H) x 16.8 (W) x 25.7 (L) mm
        Accessories Included 1 non magnetic screw driver
        1 brush
        2 washers
        4 pairs of mounting screws: 5mm, 8mm, 10mm, 12mm
        1 plastic protector

         

        Kategorijos

        Audio-Technica AT-OC9XEN, kartridžas
        Audio-Technica

        Audio-Technica AT-OC9XEN, kartridžas

        339.00 €

        Naujos kartos kartridžas iš legendinės OC9 serijos kartridžas su dviguba judančia rite ir dangteliu.

         

        APRAŠYMAS

        Since its introduction more than 30 years ago, Audio-Technica’s pioneering moving coil OC9 cartridge series has been prized by demanding vinyl listeners and professional critics alike for its musical transparency, expression of sound and precise construction. Featuring a square shank for accurate stylus alignment and nude diamond for increased fine detail retrieval.

         

        TECHNINIAI DUOMENYS

        SPECIFIKACIJOS

        Model AT-OC9XEN
        Mounting 1/2” centers / Threaded inserts
        Frequency Response 20 - 30,000 Hz
        Body Material Aluminium
        Channel Separation 25 dB (1 kHz)
        Output Channel Balance 1.5 dB (1 kHz)
        Output Voltage 0.35 mV (@ 1 kHz, 5 cm/sec)
        Vertical Tracking Angle 20 degrees
        Vertical Tracking Force Range 1.8 to 2.2 g (standard 2.0 g)
        Stylus Shape Elliptical Nude
        Stylus Size 0.3 x 0.7 mil
        Stylus Construction Nude square shank
        Cantilever Aluminium pipe
        Coil Impedance 12 Ohms (1 kHz)
        Coil Inductance 25 μH (1 kHz)
        DC Resistance 12 Ohms
        Static Compliance 20 x 10 – 6 cm / dyne
        Dynamic Compliance 9 x 10 – 6 cm / dyne (100 Hz)
        Terminal Pins Brass
        Wire Used for Coil PCOCC (Copper by Ohno Continuous Casting process.)
        Recommended Load Impedance Min 100 Ohms
        Cartridge Weight 7.6 g
        Dimensions 17.3 (H) x 16.8 (W) x 25.7 (L) mm
        Accessories Included 1 non magnetic screw driver
        1 brush
        2 washers
        4 pairs of mounting screws: 5mm, 8mm, 10mm, 12mm
        1 plastic protector

         

        Žiūrėti produktą

        • Gyvas pokalbis

          Ekspertų nuomonė ir patarimai

        • Pristatymas

          Lietuvoje per 1-2 d.d.

        • Darbo valandos

          Darbo dienomis 9.00 - 18.00

        • Atsiskaitymas

          Patogiausi būdai internetu
        Atgal į viršų

        Naujos kartos kartridžas iš legendinės OC9 serijos kartridžas su dviguba judančia rite ir dangteliu.

        • Dažnių juosta: 20 - 30,000 Hz.
        • Kantileveris: Aliuminis.
        • Kanalų atskirtis: 25 dB (1 kHz).
        • DC varža: 12 omų.

         

        Since its introduction more than 30 years ago, Audio-Technica’s pioneering moving coil OC9 cartridge series has been prized by demanding vinyl listeners and professional critics alike for its musical transparency, expression of sound and precise construction. Featuring a square shank for accurate stylus alignment and nude diamond for increased fine detail retrieval.

        • Features low mass nude elliptical stylus and aluminium cantilever
        • A neodymium magnet and pure iron yoke provide increased magnetic energy
        • Threaded inserts in the cartridge body enable the cartridge to be mounted on to the headshell or integral tonearm with just two screws – no nuts required 
        • Aluminium body minimizes unwanted vibration for reduced resonance and a superior audio reproduction
        • Pure Copper by Ohno Continuous Casting process (PCOCC) is used for the coils to achieve the purest signal possible

               

              SPECIFIKACIJOS

              Model AT-OC9XEN
              Mounting 1/2” centers / Threaded inserts
              Frequency Response 20 - 30,000 Hz
              Body Material Aluminium
              Channel Separation 25 dB (1 kHz)
              Output Channel Balance 1.5 dB (1 kHz)
              Output Voltage 0.35 mV (@ 1 kHz, 5 cm/sec)
              Vertical Tracking Angle 20 degrees
              Vertical Tracking Force Range 1.8 to 2.2 g (standard 2.0 g)
              Stylus Shape Elliptical Nude
              Stylus Size 0.3 x 0.7 mil
              Stylus Construction Nude square shank
              Cantilever Aluminium pipe
              Coil Impedance 12 Ohms (1 kHz)
              Coil Inductance 25 μH (1 kHz)
              DC Resistance 12 Ohms
              Static Compliance 20 x 10 – 6 cm / dyne
              Dynamic Compliance 9 x 10 – 6 cm / dyne (100 Hz)
              Terminal Pins Brass
              Wire Used for Coil PCOCC (Copper by Ohno Continuous Casting process.)
              Recommended Load Impedance Min 100 Ohms
              Cartridge Weight 7.6 g
              Dimensions 17.3 (H) x 16.8 (W) x 25.7 (L) mm
              Accessories Included 1 non magnetic screw driver
              1 brush
              2 washers
              4 pairs of mounting screws: 5mm, 8mm, 10mm, 12mm
              1 plastic protector