1 2
Audio-Technica

Audio-Technica AT-VM95E, kartridžas

59.00 €

Siuntimas ir pristatymas

Prekes visoje Lietuvoje (išskyrus Kuršių Neriją) pristato skubių siuntų tarnyba "Venipak" per 1-2 darbo dienas, tiesiai į namus ar darbovietę. Pristatymas yra nemokamas, jeigu prekių suma viršija 100€, kitu atveju taikomas 4,99€ pristatymo mokestis. Kurjeris pieš atveždamas prekes su Jumis susisieks Jūsų nurodytu telefono numeriu ir suderins pristatymo laiką.

VM95 serijos eliptinis stereo kartridžas (su dvigubu magnetu).

  • Dažnių juosta: 20 - 20.000 Hz.
  • Kantileveris: Aliuminis.
  • Kanalų atskirtis: 20 dB (1 kHz).
  • VM tipo kartridžas.

 

The AT-VM95E, the new Audio-Technica entry model Elliptical cartridge will replace the legendary AT95E and take advantage of the developments of the AT95EX introduced in 2015. The AT-VM95E features an improved and distinctive design resulting in a more rigid low resonance housing, and two threaded inserts in the cartridge body enabling it to be mounted to the headshell or on an integral tonearm with just two screws, no nuts.

  • Aluminium cantilever
  • 4.0mV output voltage
  • Compatible body with all VM95 Series stylus assemblies
  • Replacement for AT95E and AT95EX
  • 20 to 22,000Hz frequency response
  

VM95 Series - Styli compatibility

Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VM9E Series compatibility with the AT-XP Series DJ Cartridges

  • The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers.
  • VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers.
  • Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli.
  • The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing.
  • The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction.


      SPECIFIKACIJOS

      Model AT-VM95E
      Type VM Stereo Dual Magnet
      Mounting 1/2” centres
      Frequency Response 20 - 22,000 Hz
      Channel Separation 20 dB (1 kHz)
      Output Channel Balance 2.0 dB (1 kHz)
      Output Voltage 4.0 mV (@ 1 kHz, 5 cm/sec)
      Vertical Tracking Angle 23°
      Vertical Tracking Force Range 1.8 - 2.2g (standard 2.0 g)
      Stylus Shape Elliptical
      Stylus Size 0.3 x 0.7 mil
      Stylus Construction Bonded Round Shank
      Cantilever Aluminium Pipe
      Coil Impedance 3.3 kΩ (1 kHz)
      Coil Inductance 550 mH (1 kHz)
      DC Resistance 485 Ω
      Static Compliance 17 x 10 – 6 cm / dyne
      Dynamic Compliance 7 x 10 – 6 cm / dyne (100 Hz)
      Wire Used for Coil T.P. Copper
      Recommended Load Impedance 47,000 Ω
      Recommended Load Capacitance 100-200 pF
      Cartridge Weight 6.1g
      Dimensions 17.2 x 18.9 x 28.3 ( H x W x D mm)
      Replacement Stylus AT-VMN95E
      Accessories Included Two 11 mm installation screws;
      Two 8 mm installation screws;
      Two washers


      Kategorijos

      Audio-Technica AT-VM95E, kartridžas
      Audio-Technica

      Audio-Technica AT-VM95E, kartridžas

      59.00 €

      VM95 serijos eliptinis stereo kartridžas (su dvigubu magnetu).

       

      APRAŠYMAS

      The AT-VM95E, the new Audio-Technica entry model Elliptical cartridge will replace the legendary AT95E and take advantage of the developments of the AT95EX introduced in 2015. The AT-VM95E features an improved and distinctive design resulting in a more rigid low resonance housing, and two threaded inserts in the cartridge body enabling it to be mounted to the headshell or on an integral tonearm with just two screws, no nuts.

      • Aluminium cantilever
      • 4.0mV output voltage
      • Compatible body with all VM95 Series stylus assemblies
      • Replacement for AT95E and AT95EX
      • 20 to 22,000Hz frequency response
       

      VM95 Series - Styli compatibility

      Every cartridge diamond stylus becomes worn after a period of play.

      Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

      Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

      The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

      AT-VM9E Series compatibility with the AT-XP Series DJ Cartridges

      • The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers.
      • VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers.
      • Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli.
      • The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing.
      • The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction.


        TECHNINIAI DUOMENYS

        SPECIFIKACIJOS

        Model AT-VM95E
        Type VM Stereo Dual Magnet
        Mounting 1/2” centres
        Frequency Response 20 - 22,000 Hz
        Channel Separation 20 dB (1 kHz)
        Output Channel Balance 2.0 dB (1 kHz)
        Output Voltage 4.0 mV (@ 1 kHz, 5 cm/sec)
        Vertical Tracking Angle 23°
        Vertical Tracking Force Range 1.8 - 2.2g (standard 2.0 g)
        Stylus Shape Elliptical
        Stylus Size 0.3 x 0.7 mil
        Stylus Construction Bonded Round Shank
        Cantilever Aluminium Pipe
        Coil Impedance 3.3 kΩ (1 kHz)
        Coil Inductance 550 mH (1 kHz)
        DC Resistance 485 Ω
        Static Compliance 17 x 10 – 6 cm / dyne
        Dynamic Compliance 7 x 10 – 6 cm / dyne (100 Hz)
        Wire Used for Coil T.P. Copper
        Recommended Load Impedance 47,000 Ω
        Recommended Load Capacitance 100-200 pF
        Cartridge Weight 6.1g
        Dimensions 17.2 x 18.9 x 28.3 ( H x W x D mm)
        Replacement Stylus AT-VMN95E
        Accessories Included Two 11 mm installation screws;
        Two 8 mm installation screws;
        Two washers


        Žiūrėti produktą

        • Gyvas pokalbis

          Ekspertų nuomonė ir patarimai

        • Pristatymas

          Lietuvoje per 1-2 d.d.

        • Darbo valandos

          Darbo dienomis 9.00 - 18.00

        • Atsiskaitymas

          Patogiausi būdai internetu
        Atgal į viršų

        VM95 serijos eliptinis stereo kartridžas (su dvigubu magnetu).

        • Dažnių juosta: 20 - 20.000 Hz.
        • Kantileveris: Aliuminis.
        • Kanalų atskirtis: 20 dB (1 kHz).
        • VM tipo kartridžas.

         

        The AT-VM95E, the new Audio-Technica entry model Elliptical cartridge will replace the legendary AT95E and take advantage of the developments of the AT95EX introduced in 2015. The AT-VM95E features an improved and distinctive design resulting in a more rigid low resonance housing, and two threaded inserts in the cartridge body enabling it to be mounted to the headshell or on an integral tonearm with just two screws, no nuts.

        • Aluminium cantilever
        • 4.0mV output voltage
        • Compatible body with all VM95 Series stylus assemblies
        • Replacement for AT95E and AT95EX
        • 20 to 22,000Hz frequency response
                  

        VM95 Series - Styli compatibility

        Every cartridge diamond stylus becomes worn after a period of play.

        Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

        Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

        The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

        AT-VM9E Series compatibility with the AT-XP Series DJ Cartridges

        • The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers.
        • VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers.
        • Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli.
        • The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing.
        • The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction.


            SPECIFIKACIJOS

            Model AT-VM95E
            Type VM Stereo Dual Magnet
            Mounting 1/2” centres
            Frequency Response 20 - 22,000 Hz
            Channel Separation 20 dB (1 kHz)
            Output Channel Balance 2.0 dB (1 kHz)
            Output Voltage 4.0 mV (@ 1 kHz, 5 cm/sec)
            Vertical Tracking Angle 23°
            Vertical Tracking Force Range 1.8 - 2.2g (standard 2.0 g)
            Stylus Shape Elliptical
            Stylus Size 0.3 x 0.7 mil
            Stylus Construction Bonded Round Shank
            Cantilever Aluminium Pipe
            Coil Impedance 3.3 kΩ (1 kHz)
            Coil Inductance 550 mH (1 kHz)
            DC Resistance 485 Ω
            Static Compliance 17 x 10 – 6 cm / dyne
            Dynamic Compliance 7 x 10 – 6 cm / dyne (100 Hz)
            Wire Used for Coil T.P. Copper
            Recommended Load Impedance 47,000 Ω
            Recommended Load Capacitance 100-200 pF
            Cartridge Weight 6.1g
            Dimensions 17.2 x 18.9 x 28.3 ( H x W x D mm)
            Replacement Stylus AT-VMN95E
            Accessories Included Two 11 mm installation screws;
            Two 8 mm installation screws;
            Two washers