Monitor Audio Bronze W10, žemų dažnių garso kolonėlė (įvairių spalvų)

780.00 €

Monitor Audio Bronze W10, žemų dažnių garso kolonėlė (įvairių spalvų) - Urban Grey yra užsakytas ir bus išsiųstas, kai tik bus sandėlyje.


Siuntimas ir pristatymas

Prekes visoje Lietuvoje (išskyrus Kuršių Neriją) pristato skubių siuntų tarnyba "Venipak" per 1-2 darbo dienas, tiesiai į namus ar darbovietę. Pristatymas yra nemokamas, jeigu prekių suma viršija 100€, kitu atveju taikomas 4,99€ pristatymo mokestis. Kurjeris pieš atveždamas prekes su Jumis susisieks Jūsų nurodytu telefono numeriu ir suderins pristatymo laiką.

Monitor Audio Bronze W10 tai naujos kartos žemų dažnių garso kolonėlė. Atnaujinant kolonėlę paliktos visos geriausios pirmtako garso savybės ir išlaikytas kokybiškas bei galingas žemų dažnių garsas!

  • Galia: 220 W.
  • D klasės stiprintuvas.
  • 10" flat panel ABR.
  • Konstrukcijos panaudota 18 mm. MDF plokštė.

 

The Bronze W10’s long-throw 10" C-CAM subwoofer driver combines with the 10" auxiliary bass radiator to bring a vivid realism to any performance.

Our engineers have acoustically improved the driver and bass radiator by reducing the moving masses and tuning the compliances in the system to improve the transient response - kick drumsand explosions now have much more punch and precision. Reduced moving mass and improved rubber feet allows more energy to be transmitted directly into the room rather than being lost through mechanical vibrations through the floor and walls.

The Bronze W10 is a stunning addition to any room.

Key Features

  • Long-throw 10" (250 mm) driver featuring ‘dished’ C-CAM
  • 10" (250 mm) flat panel Auxiliary Bass Radiator (ABR) positioned underneath the unit
  • Class D amplifier with high current Switch Mode Power Supply (SMPSU)

     

        SPECIFIKACIJOS

        System Format

        Long-throw 10" driver featuring ‘dished’ C-CAM cone. 10" flat panel ABR (Auxiliary Bass Radiator).
        18 mm M.D.F. internally braced construction

        Lower Frequency Limit

        -3 dB @ 33 Hz / -10 dB @ 28 Hz (Free Field) Default preset: Music, -3 dB @ 29 Hz / -10 dB @ 25 Hz (In Room)

        Upper Frequency Limit

        -6 dB @ 150 Hz

        Drive Unit Complement

        1 x 250 mm (10") C-CAM subwoofer driver featuring a 2" long throw voice coil

        Linear Driver Excursion

        17 mm peak to peak

        Amplifier Output

        220 W

        Amplifier Classification

        Class D with high current Switch mode power supply (SMPSU)

        Phase Control

        0 Degrees & 180 Degree pure Invert

        Low Pass Filter Alignment

        4th order (24 dB/Octave), from 50 Hz to 120 Hz

        Equalisation DSP

        3 pre-set modes: Music, Movie, Impact

        Auto Sensing

        Line Level >3mV. Auto Standby feature after 20 mins

        Audio Input/Outputs

        LFE unbalanced input RCA
        Stereo unbalanced inputs RCA

        Input Impedance

        20 kOhms input impedance

        12 V Trigger

        3.5 mm mono mini-jack. 6 V threshold

        Electrical Certifications

        CE / CB / ETL / Fcc / CCC / ErP (Energy saving compliant)

        Mains Input Voltage

        110 – 120 Vac 50 – 60 Hz / 220 – 240 Vac 50 – 60 Hz (Manually selected)

        Power Consumption

        Maximum 300 W, Standby <0.5 W (ErP compliance)

        Fuse Type

        20 mm T4AL 250 VAC

        External Dimensions (Including Amp, Drivers and Terminals (H x W x D))

        321 x 321 x 364 mm (125/8 x 125/8 x 145/16")

        External Dimensions (Including Amp, Drivers, Terminals and Feet (H x W x D))

        366.5 x 321 x 364 mm (147/16 x 125/8 x 145/16")

        Weight (unpacked)

        13.4 kg (29 lb 9 oz)


        INSTRUKCIJOS

        User Manual (EN).

        Monitor Audio Bronze W10, žemų dažnių garso kolonėlė (įvairių spalvų)- Urban Grey
        Monitor Audio

        Monitor Audio Bronze W10, žemų dažnių garso kolonėlė (įvairių spalvų)

        780.00 €

        Monitor Audio Bronze W10 tai naujos kartos žemų dažnių garso kolonėlė. Atnaujinant kolonėlę paliktos visos geriausios pirmtako garso savybės ir išlaikytas kokybiškas bei galingas žemų dažnių garsas!

         

        APRAŠYMAS

        The Bronze W10’s long-throw 10" C-CAM subwoofer driver combines with the 10" auxiliary bass radiator to bring a vivid realism to any performance.

        Our engineers have acoustically improved the driver and bass radiator by reducing the moving masses and tuning the compliances in the system to improve the transient response - kick drumsand explosions now have much more punch and precision. Reduced moving mass and improved rubber feet allows more energy to be transmitted directly into the room rather than being lost through mechanical vibrations through the floor and walls.

        The Bronze W10 is a stunning addition to any room.

        Key Features

        • Long-throw 10" (250 mm) driver featuring ‘dished’ C-CAM
        • 10" (250 mm) flat panel Auxiliary Bass Radiator (ABR) positioned underneath the unit
        • Class D amplifier with high current Switch Mode Power Supply (SMPSU)

           

          TECHNINIAI DUOMENYS

          SPECIFIKACIJOS

          System Format

          Long-throw 10" driver featuring ‘dished’ C-CAM cone. 10" flat panel ABR (Auxiliary Bass Radiator).
          18 mm M.D.F. internally braced construction

          Lower Frequency Limit

          -3 dB @ 33 Hz / -10 dB @ 28 Hz (Free Field) Default preset: Music, -3 dB @ 29 Hz / -10 dB @ 25 Hz (In Room)

          Upper Frequency Limit

          -6 dB @ 150 Hz

          Drive Unit Complement

          1 x 250 mm (10") C-CAM subwoofer driver featuring a 2" long throw voice coil

          Linear Driver Excursion

          17 mm peak to peak

          Amplifier Output

          220 W

          Amplifier Classification

          Class D with high current Switch mode power supply (SMPSU)

          Phase Control

          0 Degrees & 180 Degree pure Invert

          Low Pass Filter Alignment

          4th order (24 dB/Octave), from 50 Hz to 120 Hz

          Equalisation DSP

          3 pre-set modes: Music, Movie, Impact

          Auto Sensing

          Line Level >3mV. Auto Standby feature after 20 mins

          Audio Input/Outputs

          LFE unbalanced input RCA
          Stereo unbalanced inputs RCA

          Input Impedance

          20 kOhms input impedance

          12 V Trigger

          3.5 mm mono mini-jack. 6 V threshold

          Electrical Certifications

          CE / CB / ETL / Fcc / CCC / ErP (Energy saving compliant)

          Mains Input Voltage

          110 – 120 Vac 50 – 60 Hz / 220 – 240 Vac 50 – 60 Hz (Manually selected)

          Power Consumption

          Maximum 300 W, Standby <0.5 W (ErP compliance)

          Fuse Type

          20 mm T4AL 250 VAC

          External Dimensions (Including Amp, Drivers and Terminals (H x W x D))

          321 x 321 x 364 mm (125/8 x 125/8 x 145/16")

          External Dimensions (Including Amp, Drivers, Terminals and Feet (H x W x D))

          366.5 x 321 x 364 mm (147/16 x 125/8 x 145/16")

          Weight (unpacked)

          13.4 kg (29 lb 9 oz)


          DOKUMENTAI

          INSTRUKCIJOS

          User Manual (EN).

          Spalva

          Žiūrėti produktą

          Monitor Audio Bronze W10 tai naujos kartos žemų dažnių garso kolonėlė. Atnaujinant kolonėlę paliktos visos geriausios pirmtako garso savybės ir išlaikytas kokybiškas bei galingas žemų dažnių garsas!

          • Galia: 220 W.
          • D klasės stiprintuvas.
          • 10" flat panel ABR.
          • Konstrukcijos panaudota 18 mm. MDF plokštė.

           

          The Bronze W10’s long-throw 10" C-CAM subwoofer driver combines with the 10" auxiliary bass radiator to bring a vivid realism to any performance.

          Our engineers have acoustically improved the driver and bass radiator by reducing the moving masses and tuning the compliances in the system to improve the transient response - kick drumsand explosions now have much more punch and precision. Reduced moving mass and improved rubber feet allows more energy to be transmitted directly into the room rather than being lost through mechanical vibrations through the floor and walls.

          The Bronze W10 is a stunning addition to any room.

          Key Features

          • Long-throw 10" (250 mm) driver featuring ‘dished’ C-CAM
          • 10" (250 mm) flat panel Auxiliary Bass Radiator (ABR) positioned underneath the unit
          • Class D amplifier with high current Switch Mode Power Supply (SMPSU)

             

                SPECIFIKACIJOS

                System Format

                Long-throw 10" driver featuring ‘dished’ C-CAM cone. 10" flat panel ABR (Auxiliary Bass Radiator).
                18 mm M.D.F. internally braced construction

                Lower Frequency Limit

                -3 dB @ 33 Hz / -10 dB @ 28 Hz (Free Field) Default preset: Music, -3 dB @ 29 Hz / -10 dB @ 25 Hz (In Room)

                Upper Frequency Limit

                -6 dB @ 150 Hz

                Drive Unit Complement

                1 x 250 mm (10") C-CAM subwoofer driver featuring a 2" long throw voice coil

                Linear Driver Excursion

                17 mm peak to peak

                Amplifier Output

                220 W

                Amplifier Classification

                Class D with high current Switch mode power supply (SMPSU)

                Phase Control

                0 Degrees & 180 Degree pure Invert

                Low Pass Filter Alignment

                4th order (24 dB/Octave), from 50 Hz to 120 Hz

                Equalisation DSP

                3 pre-set modes: Music, Movie, Impact

                Auto Sensing

                Line Level >3mV. Auto Standby feature after 20 mins

                Audio Input/Outputs

                LFE unbalanced input RCA
                Stereo unbalanced inputs RCA

                Input Impedance

                20 kOhms input impedance

                12 V Trigger

                3.5 mm mono mini-jack. 6 V threshold

                Electrical Certifications

                CE / CB / ETL / Fcc / CCC / ErP (Energy saving compliant)

                Mains Input Voltage

                110 – 120 Vac 50 – 60 Hz / 220 – 240 Vac 50 – 60 Hz (Manually selected)

                Power Consumption

                Maximum 300 W, Standby <0.5 W (ErP compliance)

                Fuse Type

                20 mm T4AL 250 VAC

                External Dimensions (Including Amp, Drivers and Terminals (H x W x D))

                321 x 321 x 364 mm (125/8 x 125/8 x 145/16")

                External Dimensions (Including Amp, Drivers, Terminals and Feet (H x W x D))

                366.5 x 321 x 364 mm (147/16 x 125/8 x 145/16")

                Weight (unpacked)

                13.4 kg (29 lb 9 oz)


                INSTRUKCIJOS

                User Manual (EN).