Smart lighting control module FIBARO Dimmer 2, 250W
€68.24 EUR
Unit price /
Unavailable
Smart lighting control module FIBARO Dimmer 2, 250W
is backordered and will ship as soon as it is back in stock.
Home delivery from €4.99
Venipak courier within 1-2 working days.
Collect in store €0
Armaturininkai str. 1, Kaunas Working hours: IV 9:00-18:00
Share:
INFORMACIJA
VIDEO
DESCRIPTION
TECHNICAL DATA
DOCUMENTS
INFORMACIJA
This device can adjust the intensity of the lighting and either turn on/off the light source either wirelessly or via a switch connected to it. This new Fibar dimmer has a new algorithm to recognize smart light sources, which makes it even easier to configure and has a wider application.
Automatic light source detection and adaptation
Electricity consumption measurement
Suitable for 2 and 3 wire systems
Supports two lighting control technologies
New generation, powerful 500 Z-Wave processor
Control of lighting scenarios
It has protection and the ability to signal deviations
Certified by DEKRA and Z-Wave
VIDEO
DESCRIPTION
The fibar remote lighting control module is designed to fit in a standard flush-mounted switch box or in areas where lighting control is required. The device can control the lighting electrical circuit with or without grounding. Lighting is controlled by switching on or off, brightening or dimming the lamps remotely or manually. In order to control extremely low-power lamps, it is necessary to install a Fibar shunt in the electric circuit (see the user manual).
The control module can communicate with any z-wave controller or device. It is possible to control the device with smart devices and a computer, as well as manually with bistable or monostable switches.
The device communicates with the central controller and other devices via radio communication - Z-Wave protocol. Communication between the user and the device takes place via Wi-Fi or the Internet through a central controller.
A few things
Control of lighting scenarios
It has protection and the ability to signal deviations
Certified by DEKRA and Z-Wave
A new level of intelligence
Using a unique algorithm, this controller automatically recognizes the connected light source and adapts to it. As a result, you can rest assured that your lighting will be optimally controlled.
Ability to connect to 2 and 3 wire systems
You can also use it with old-style electrical installation systems.
Electricity consumption measurement
With the help of the smart Fibar Dimmer 2 controller, you can monitor the electricity consumption of light sources. And thus control costs.
Control various light sources
Light intensity control is possible with two technologies ("Leading edge" and "Trailing edge").
New possibilities
You can create individual lighting scenarios depending on your needs. For example, when the lighting is turned on at night, it can start to light up gently without annoying eyes accustomed to the dark.
Control of lighting scenarios
The smart Dimmer 2 controller allows you to manage predefined lighting scenarios in a very convenient way.
Intellectual protection
The smart regulator has protection systems. If the device overheats, the voltage drops, the load increases - you will receive messages about this.
Even more convenient connection
The smart Fibaro Dimmer 2 is very easy to connect, thanks to the built-in even larger contacts that allow you to connect large diameter wires.
Convenient configuration
Built-in RGB diode helps during installation. The RGB diode built into the Fibaro dimmer 2 controller shows when the device is connected to the network, you can see if the settings were made correctly or if the software update was successful. You can also see if the Z wave network signal is strong enough.
Z Wave Network Coverage Tester
Fibar's smart regulator can be used to test Z Wave network signal strength. The built-in RGB diode will report the quality of the network. You will be sure that you have chosen the right place for the installation of the controller.
Software update
A software update is available. As updates become available, you will be able to use the new features without having to purchase a new controller.
Summary
Smart universal lighting regulator Fibaro Dimmer 2 is a revolution in lighting regulation. Thanks to the unique technology, the regulator knows the type of educational source and adapts to it. New processor, new Z-Wave Plus protocol provides new possibilities. The ability to track electricity consumption allows you to optimize electricity consumption. Controlling lighting scenarios allows you to create an even cozier home.
TECHNICAL DATA
Power supply: 100-240 V~ 50/60 Hz
Control distance: up to 50m outdoors; up to 30m inside (depending on building materials)
Smart lighting control module FIBARO Dimmer 2, 250W
€68.24 EUR
Unit price /
Unavailable
This device can adjust the intensity of the lighting and either turn on/off the light source either wirelessly or via a switch connected to it. This new Fibar dimmer has a new algorithm to recognize smart light sources, which makes it even easier to configure and has a wider application.
Automatic light source detection and adaptation
Electricity consumption measurement
Suitable for 2 and 3 wire systems
Supports two lighting control technologies
New generation, powerful 500 Z-Wave processor
Control of lighting scenarios
It has protection and the ability to signal deviations
Certified by DEKRA and Z-Wave
VIDEO
DESCRIPTION
The fibar remote lighting control module is designed to fit in a standard flush-mounted switch box or in areas where lighting control is required. The device can control the lighting electrical circuit with or without grounding. Lighting is controlled by switching on or off, brightening or dimming the lamps remotely or manually. In order to control extremely low-power lamps, it is necessary to install a Fibar shunt in the electric circuit (see the user manual).
The control module can communicate with any z-wave controller or device. It is possible to control the device with smart devices and a computer, as well as manually with bistable or monostable switches.
The device communicates with the central controller and other devices via radio communication - Z-Wave protocol. Communication between the user and the device takes place via Wi-Fi or the Internet through a central controller.
A few things
Control of lighting scenarios
It has protection and the ability to signal deviations
Certified by DEKRA and Z-Wave
A new level of intelligence
Using a unique algorithm, this controller automatically recognizes the connected light source and adapts to it. As a result, you can rest assured that your lighting will be optimally controlled.
Ability to connect to 2 and 3 wire systems
You can also use it with old-style electrical installation systems.
Electricity consumption measurement
With the help of the smart Fibar Dimmer 2 controller, you can monitor the electricity consumption of light sources. And thus control costs.
Control various light sources
Light intensity control is possible with two technologies ("Leading edge" and "Trailing edge").
New possibilities
You can create individual lighting scenarios depending on your needs. For example, when the lighting is turned on at night, it can start to light up gently without annoying eyes accustomed to the dark.
Control of lighting scenarios
The smart Dimmer 2 controller allows you to manage predefined lighting scenarios in a very convenient way.
Intellectual protection
The smart regulator has protection systems. If the device overheats, the voltage drops, the load increases - you will receive messages about this.
Even more convenient connection
The smart Fibaro Dimmer 2 is very easy to connect, thanks to the built-in even larger contacts that allow you to connect large diameter wires.
Convenient configuration
Built-in RGB diode helps during installation. The RGB diode built into the Fibaro dimmer 2 controller shows when the device is connected to the network, you can see if the settings were made correctly or if the software update was successful. You can also see if the Z wave network signal is strong enough.
Z Wave Network Coverage Tester
Fibar's smart regulator can be used to test Z Wave network signal strength. The built-in RGB diode will report the quality of the network. You will be sure that you have chosen the right place for the installation of the controller.
Software update
A software update is available. As updates become available, you will be able to use the new features without having to purchase a new controller.
Summary
Smart universal lighting regulator Fibaro Dimmer 2 is a revolution in lighting regulation. Thanks to the unique technology, the regulator knows the type of educational source and adapts to it. New processor, new Z-Wave Plus protocol provides new possibilities. The ability to track electricity consumption allows you to optimize electricity consumption. Controlling lighting scenarios allows you to create an even cozier home.
TECHNICAL DATA
Power supply: 100-240 V~ 50/60 Hz
Control distance: up to 50m outdoors; up to 30m inside (depending on building materials)
This device can adjust the intensity of the lighting and either turn on/off the light source either wirelessly or via a switch connected to it. This new Fibar dimmer has a new algorithm to recognize smart light sources, which makes it even easier to configure and has a wider application.
Automatic light source detection and adaptation
Electricity consumption measurement
Suitable for 2 and 3 wire systems
Supports two lighting control technologies
New generation, powerful 500 Z-Wave processor
Control of lighting scenarios
It has protection and the ability to signal deviations
Certified by DEKRA and Z-Wave
VIDEO
DESCRIPTION
The fibar remote lighting control module is designed to fit in a standard flush-mounted switch box or in areas where lighting control is required. The device can control the lighting electrical circuit with or without grounding. Lighting is controlled by switching on or off, brightening or dimming the lamps remotely or manually. In order to control extremely low-power lamps, it is necessary to install a Fibar shunt in the electric circuit (see the user manual).
The control module can communicate with any z-wave controller or device. It is possible to control the device with smart devices and a computer, as well as manually with bistable or monostable switches.
The device communicates with the central controller and other devices via radio communication - Z-Wave protocol. Communication between the user and the device takes place via Wi-Fi or the Internet through a central controller.
A few things
Control of lighting scenarios
It has protection and the ability to signal deviations
Certified by DEKRA and Z-Wave
A new level of intelligence
Using a unique algorithm, this controller automatically recognizes the connected light source and adapts to it. As a result, you can rest assured that your lighting will be optimally controlled.
Ability to connect to 2 and 3 wire systems
You can also use it with old-style electrical installation systems.
Electricity consumption measurement
With the help of the smart Fibar Dimmer 2 controller, you can monitor the electricity consumption of light sources. And thus control costs.
Control various light sources
Light intensity control is possible with two technologies ("Leading edge" and "Trailing edge").
New possibilities
You can create individual lighting scenarios depending on your needs. For example, when the lighting is turned on at night, it can start to light up gently without annoying eyes accustomed to the dark.
Control of lighting scenarios
The smart Dimmer 2 controller allows you to manage predefined lighting scenarios in a very convenient way.
Intellectual protection
The smart regulator has protection systems. If the device overheats, the voltage drops, the load increases - you will receive messages about this.
Even more convenient connection
The smart Fibaro Dimmer 2 is very easy to connect, thanks to the built-in even larger contacts that allow you to connect large diameter wires.
Convenient configuration
Built-in RGB diode helps during installation. The RGB diode built into the Fibaro dimmer 2 controller shows when the device is connected to the network, you can see if the settings were made correctly or if the software update was successful. You can also see if the Z wave network signal is strong enough.
Z Wave Network Coverage Tester
Fibar's smart regulator can be used to test Z Wave network signal strength. The built-in RGB diode will report the quality of the network. You will be sure that you have chosen the right place for the installation of the controller.
Software update
A software update is available. As updates become available, you will be able to use the new features without having to purchase a new controller.
Summary
Smart universal lighting regulator Fibaro Dimmer 2 is a revolution in lighting regulation. Thanks to the unique technology, the regulator knows the type of educational source and adapts to it. New processor, new Z-Wave Plus protocol provides new possibilities. The ability to track electricity consumption allows you to optimize electricity consumption. Controlling lighting scenarios allows you to create an even cozier home.
TECHNICAL DATA
Power supply: 100-240 V~ 50/60 Hz
Control distance: up to 50m outdoors; up to 30m inside (depending on building materials)