Ortofon

Ortofon MC Cadenza Red turntable head

€1,573.95 EUR

Ortofon MC Cadenza Red turntable head is backordered and will ship as soon as it is back in stock.

▪️ Turite klausimų dėl šios prekės❓Galime pakonsultuoti telefonu +370 683 90000 arba atvykite į mūsų saloną Armatūrininkų g. 1, Kaunas.

Home delivery from €4.99

Venipak courier within 1-2 working days.

Collect in store €0

Armaturininkai str. 1, Kaunas
Working hours: IV 9:00-18:00

The Cadenza Red model uses a Nude Fine Line stylus with a cylindrical aluminum cantilever. The radius of the sensor tip is r/R 8/40 µm.

  • Stylus type: Nude Fine Line on Alu cantilever .
  • Frequency band: - 20 Hz - 20 kHz - +3/-1 .
  • Pressure power: 2.2-2.7 g (22-27 mN).

The Cadenza Mono model is made with a Nude Fine Line stylus and a cylindrical aluminum cantilever. The stylus radius is r/R 8/40 µm.
The coils are made from 6NX (99.9999%) pure silver wire. An improved winding process on the armature allows a better channel balance.
For easy use the pins are connected so you get the same signal from both pairs of connecting pins.
Sharing internal build with the Cadenza Red and with optimized adjustments for mono playback the sound is relaxed, homogeneous and moderate.


SPECIFICATIONS

  • Output voltage at 1 kHz 5 cm/sec - 0.45 mV
  • Frequency response 20 Hz - 20 kHz - +3/-1
  • Tracking ability at 315 Hz at recommended tracking force *) - 70 μm
  • Compliance, dynamic, lateral - 12 μm/mN
  • Stylus type - Nude Fine Line on Alu cantilever
  • Stylus tip radius - r/R 8/40 μm
  • Tracking force range - 2.2-2.7 g (22-27 mN)
  • Tracking force recommended - 2.5 g (25 mN)
  • Tracking angle - 20º
  • Internal impedance, DC resistance - 5 Ohm
  • Recommended load impedance - 50-500 Ohm
  • Cartridge body material - Stainless steel Aluminum
  • Cartridge color - Natural/Black
  • Cartridge weight - 10.7 g

INSTRUCTIONS

User Manual (EN).

  • Live chat

    Expert opinion and advice

  • Delivery

    2-6 days, depends on country

  • Working hours

    On working days 9.00 - 18.00

  • Billing

    The most convenient ways
Back to top

The Cadenza Red model uses a Nude Fine Line stylus with a cylindrical aluminum cantilever. The radius of the sensor tip is r/R 8/40 µm.

  • Stylus type: Nude Fine Line on Alu cantilever .
  • Frequency band: - 20 Hz - 20 kHz - +3/-1 .
  • Pressure power: 2.2-2.7 g (22-27 mN).

The Cadenza Mono model is made with a Nude Fine Line stylus and a cylindrical aluminum cantilever. The stylus radius is r/R 8/40 µm.
The coils are made from 6NX (99.9999%) pure silver wire. An improved winding process on the armature allows a better channel balance.
For easy use the pins are connected so you get the same signal from both pairs of connecting pins.
Sharing internal build with the Cadenza Red and with optimized adjustments for mono playback the sound is relaxed, homogeneous and moderate.


SPECIFICATIONS

  • Output voltage at 1 kHz 5 cm/sec - 0.45 mV
  • Frequency response 20 Hz - 20 kHz - +3/-1
  • Tracking ability at 315 Hz at recommended tracking force *) - 70 μm
  • Compliance, dynamic, lateral - 12 μm/mN
  • Stylus type - Nude Fine Line on Alu cantilever
  • Stylus tip radius - r/R 8/40 μm
  • Tracking force range - 2.2-2.7 g (22-27 mN)
  • Tracking force recommended - 2.5 g (25 mN)
  • Tracking angle - 20º
  • Internal impedance, DC resistance - 5 Ohm
  • Recommended load impedance - 50-500 Ohm
  • Cartridge body material - Stainless steel Aluminum
  • Cartridge color - Natural/Black
  • Cartridge weight - 10.7 g

INSTRUCTIONS

User Manual (EN).