HELIX S 3M, vidutinių dažnių garsiakalbis

139.00 €

HELIX S 3M, vidutinių dažnių garsiakalbis yra užsakytas ir bus išsiųstas, kai tik bus sandėlyje.


Siuntimas ir pristatymas

Prekes visoje Lietuvoje (išskyrus Kuršių Neriją) pristato skubių siuntų tarnyba "Venipak" per 1-2 darbo dienas, tiesiai į namus ar darbovietę. Pristatymas yra nemokamas, jeigu prekių suma viršija 100€, kitu atveju taikomas 4,99€ pristatymo mokestis. Kurjeris pieš atveždamas prekes su Jumis susisieks Jūsų nurodytu telefono numeriu ir suderins pristatymo laiką.

S 3M garsiakalbis yra tobulas komponentas kiekvienai kokybiškai 2-jų juostų garso sistemai.

  • Rekomenduojama stiprintuvo galia: 75W.
  • Dažnių juosta: 400 Hz - 6,000 Hz.
  • Rezonansinis dažnis: 130 Hz.
  • Varža: 4 Omai.

 

HELIX S 3M

A cone midrange driver in an elegant design, trimmed for maximum sound quality – and thus the perfect addition to any fully active 3-way speaker system.

The highly rigid membrane consists of a novel basalt fiber-paper compound. An ideal combination to ensure clear and precise sound even at high volumes  In addition to maximum uncoloured mid-range reproduction, the S 3M also offers extremely low distortion thanks to the linear neodymium magnet system.

The dream team is the combination with the S 1T tweeter and a S 6B or S 4B woofer. Driven by a power amplifier from Audiotec Fischer, the S loudspeakers perform at their best and provide the perfect basis for absolute top sound systems!

Features

  • 3” / 75 mm cone midrange speaker with novel basaltfiberpaper compound cone – a perfect combination of lowest weight, high stiffness and perfect inner damping
  • Highly efficient, compact neodymium magnet system for linear drive and minimum distortion
  • Low-resonant basket made from glassfiber reinforced plastic with optimized voice coil cooling for high power handling
  • Grille included

    SPECIFIKACIJOS

    Power RMS / max.

    P

    75 / 150 Watts
    (highpass > 400 Hz at 24 dB/Oct.)
    Impedance  Z 4 Ω
    DC resistance  Re 3.2 Ω
    Frequency response   400 Hz - 6,000 Hz
    Resonance frequency  Fs 130 Hz
    Mechanical Q factor  Qms 4.47
    Electrical Q factor  Qes 0.48
    Total Q factor Qts 0.43
    Compliance Cms 396 µm/N
    Equivalent air volume Vas 0.57 L
    Force factor  B*I 4.6 Tm
    Efficiency 1 W / 1 m SPL 86 dB
    Cone area  Sd 32 cm²
    Moving mass  Mms 3.8 g
    Cone material   Basalt-fiber-paper compound
    Mechanical resistance  Rms 0.69 kg/s
    Voice coil diameter ø 25 mm
    Voice coil winding height   8 mm
    Max. linear excursion  Xmax +/- 2 mm
    Outer diameter ø 90 mm / 3.54"
    Installation diameter ø 73 mm / 2.87"
    Installation depth   37 mm / 1.46"
         
    Recommended enclosure volumes    
    Sealed box with minimum 200 ml net volume    
    Net volumes   Recommended DSP / amplifier settings
    0.2 liter (System resonance: 230 Hz)   Crossover frequency: 500 Hz
    Min. filter slope: 12 dB/Oct.
    0.4 liter (System resonance: 190 Hz)   Crossover frequency: 450 Hz
    Min. filter slope: 18 dB/Oct.
    0.6 liter (System resonance: 170 Hz)   Crossover frequency: 400 Hz
    Min. filter slope: 24 dB/Oct.

    Note: The enclosure should always be filled with appropriate damping material.

    Kas pakuotėje?

    2 x Midrange speaker HELIX S 3M
    2 x Grille
    1 x Data sheet
    1 x Mounting pattern

     

    INSTRUKCIJOS

    User Manual (EN).

    HELIX S 3M, vidutinių dažnių garsiakalbis
    Helix

    HELIX S 3M, vidutinių dažnių garsiakalbis

    139.00 €

    S 3M garsiakalbis yra tobulas komponentas kiekvienai kokybiškai 2-jų juostų garso sistemai.

     

    APRAŠYMAS

    HELIX S 3M

    A cone midrange driver in an elegant design, trimmed for maximum sound quality – and thus the perfect addition to any fully active 3-way speaker system.

    The highly rigid membrane consists of a novel basalt fiber-paper compound. An ideal combination to ensure clear and precise sound even at high volumes  In addition to maximum uncoloured mid-range reproduction, the S 3M also offers extremely low distortion thanks to the linear neodymium magnet system.

    The dream team is the combination with the S 1T tweeter and a S 6B or S 4B woofer. Driven by a power amplifier from Audiotec Fischer, the S loudspeakers perform at their best and provide the perfect basis for absolute top sound systems!

    Features

    • 3” / 75 mm cone midrange speaker with novel basaltfiberpaper compound cone – a perfect combination of lowest weight, high stiffness and perfect inner damping
    • Highly efficient, compact neodymium magnet system for linear drive and minimum distortion
    • Low-resonant basket made from glassfiber reinforced plastic with optimized voice coil cooling for high power handling
    • Grille included

      TECHNINIAI DUOMENYS

      SPECIFIKACIJOS

      Power RMS / max.

      P

      75 / 150 Watts
      (highpass > 400 Hz at 24 dB/Oct.)
      Impedance  Z 4 Ω
      DC resistance  Re 3.2 Ω
      Frequency response   400 Hz - 6,000 Hz
      Resonance frequency  Fs 130 Hz
      Mechanical Q factor  Qms 4.47
      Electrical Q factor  Qes 0.48
      Total Q factor Qts 0.43
      Compliance Cms 396 µm/N
      Equivalent air volume Vas 0.57 L
      Force factor  B*I 4.6 Tm
      Efficiency 1 W / 1 m SPL 86 dB
      Cone area  Sd 32 cm²
      Moving mass  Mms 3.8 g
      Cone material   Basalt-fiber-paper compound
      Mechanical resistance  Rms 0.69 kg/s
      Voice coil diameter ø 25 mm
      Voice coil winding height   8 mm
      Max. linear excursion  Xmax +/- 2 mm
      Outer diameter ø 90 mm / 3.54"
      Installation diameter ø 73 mm / 2.87"
      Installation depth   37 mm / 1.46"
           
      Recommended enclosure volumes    
      Sealed box with minimum 200 ml net volume    
      Net volumes   Recommended DSP / amplifier settings
      0.2 liter (System resonance: 230 Hz)   Crossover frequency: 500 Hz
      Min. filter slope: 12 dB/Oct.
      0.4 liter (System resonance: 190 Hz)   Crossover frequency: 450 Hz
      Min. filter slope: 18 dB/Oct.
      0.6 liter (System resonance: 170 Hz)   Crossover frequency: 400 Hz
      Min. filter slope: 24 dB/Oct.

      Note: The enclosure should always be filled with appropriate damping material.

      Kas pakuotėje?

      2 x Midrange speaker HELIX S 3M
      2 x Grille
      1 x Data sheet
      1 x Mounting pattern

       

      DOKUMENTAI

      INSTRUKCIJOS

      User Manual (EN).

      Žiūrėti produktą

      S 3M garsiakalbis yra tobulas komponentas kiekvienai kokybiškai 2-jų juostų garso sistemai.

      • Rekomenduojama stiprintuvo galia: 75W.
      • Dažnių juosta: 400 Hz - 6,000 Hz.
      • Rezonansinis dažnis: 130 Hz.
      • Varža: 4 Omai.

       

      HELIX S 3M

      A cone midrange driver in an elegant design, trimmed for maximum sound quality – and thus the perfect addition to any fully active 3-way speaker system.

      The highly rigid membrane consists of a novel basalt fiber-paper compound. An ideal combination to ensure clear and precise sound even at high volumes  In addition to maximum uncoloured mid-range reproduction, the S 3M also offers extremely low distortion thanks to the linear neodymium magnet system.

      The dream team is the combination with the S 1T tweeter and a S 6B or S 4B woofer. Driven by a power amplifier from Audiotec Fischer, the S loudspeakers perform at their best and provide the perfect basis for absolute top sound systems!

      Features

      • 3” / 75 mm cone midrange speaker with novel basaltfiberpaper compound cone – a perfect combination of lowest weight, high stiffness and perfect inner damping
      • Highly efficient, compact neodymium magnet system for linear drive and minimum distortion
      • Low-resonant basket made from glassfiber reinforced plastic with optimized voice coil cooling for high power handling
      • Grille included

        SPECIFIKACIJOS

        Power RMS / max.

        P

        75 / 150 Watts
        (highpass > 400 Hz at 24 dB/Oct.)
        Impedance  Z 4 Ω
        DC resistance  Re 3.2 Ω
        Frequency response   400 Hz - 6,000 Hz
        Resonance frequency  Fs 130 Hz
        Mechanical Q factor  Qms 4.47
        Electrical Q factor  Qes 0.48
        Total Q factor Qts 0.43
        Compliance Cms 396 µm/N
        Equivalent air volume Vas 0.57 L
        Force factor  B*I 4.6 Tm
        Efficiency 1 W / 1 m SPL 86 dB
        Cone area  Sd 32 cm²
        Moving mass  Mms 3.8 g
        Cone material   Basalt-fiber-paper compound
        Mechanical resistance  Rms 0.69 kg/s
        Voice coil diameter ø 25 mm
        Voice coil winding height   8 mm
        Max. linear excursion  Xmax +/- 2 mm
        Outer diameter ø 90 mm / 3.54"
        Installation diameter ø 73 mm / 2.87"
        Installation depth   37 mm / 1.46"
             
        Recommended enclosure volumes    
        Sealed box with minimum 200 ml net volume    
        Net volumes   Recommended DSP / amplifier settings
        0.2 liter (System resonance: 230 Hz)   Crossover frequency: 500 Hz
        Min. filter slope: 12 dB/Oct.
        0.4 liter (System resonance: 190 Hz)   Crossover frequency: 450 Hz
        Min. filter slope: 18 dB/Oct.
        0.6 liter (System resonance: 170 Hz)   Crossover frequency: 400 Hz
        Min. filter slope: 24 dB/Oct.

        Note: The enclosure should always be filled with appropriate damping material.

        Kas pakuotėje?

        2 x Midrange speaker HELIX S 3M
        2 x Grille
        1 x Data sheet
        1 x Mounting pattern

         

        INSTRUKCIJOS

        User Manual (EN).