Helix M ONE X 24V

INFORMACIJA

HELIX M ONE X - 24V edition
Small, efficient and uncompromisingly stable – the M ONE X – 24V edition is an ultra-compact monoblock for subwoofer applications. Designed with the latest Class D technology, this compact amplifier effortlessly drives loudspeakers with 1 Ω impedance. Its current capability makes the M ONE X – 24V edition an excellent partner for 2 x 2 Ω subwoofers when both voice coils are connected in parallel. And for even more output power, two M ONE X – 24V edition amplifiers can be combined into one powerful unit – thanks to TwinPower Link.
In addition, the comprehensive and practical set of features leaves nothing to be desired. Ultimately, the installation will be straightforward thanks to its minimal dimensions.

Features
Small footprint Class D amplifier with up to 1,180 W RMS output power @ 1 Ω for easy combination with all 2 x 2 Ω subwoofers connected in parallel
Start-Stop capability down to 12V supply voltage
Smart highlevel input with ADEP circuit and automatic turn-on function
Integrated active crossover with low-pass, bass boost, subsonic and phase control
TwinPower Link for connecting two amplifiers in bridged mode
Bass remote control for volume adjustment
Low heat dissipation thanks to extraordinary efficiency
Special features
Smart highlevel input
The latest generation of OE car radios incorporate sophisticated possibilities of diagnosing the connected loudspeakers. If a common amplifier will be hooked up, error messages and loss of specific features (e.g. fader function) often appear – but not with the M ONE X - 24V edition.
The new ADEP circuit (Advanced Diagnostics Error Protection) avoids all these problems without loading the OE radio’s loudspeaker outputs during high volumes.

Technical data

Power RMS ≤ 1% THD+N Normal operation
One amplifier
TwinPower Link (Two amplifiers)
- @ 4 Ohms 1 x 400 Watts ( 1 x 1,400 Watts )
- @ 2 Ohms 1 x 700 Watts ( 1 x 2,060 Watts )
- @ 1 Ohm 1 x 1,030 Watts -
- bridged @ 4 Ohms - -
- bridged @ 2 Ohms - -
Max. output power per channel*: Up to 1,180 Watts RMS @ 1 Ohm
Amplifier technology Class D
Inputs 2 x RCA / Cinch
2 x Highlevel speaker input
1 x Remote In
1 x Remote control input
Input sensitivity RCA / Cinch 0.5 - 6 Volts
Highlevel 1.1 - 13 Volts
Input impedance RCA / Cinch 20 kOhms
Input impedance highlevel 9 - 33 Ohms
Outputs 1 x Speaker output
Output voltage RCA / Cinch -
Signal converter for digital input -
Frequency response 10 Hz - 250 Hz
Bass boost 0 - 12 dB / 30 - 80 Hz
Highpass -
Lowpass 50 Hz - 250 Hz adjustable
Bandpass 10 Hz - 250 Hz adjustable
Subsonic 10 Hz - 50 Hz adjustable
Phase 0 - 180° adjustable
Slope high- / lowpass -
Slope subsonic / lowpass 12 / 24 dB/Oct.
Signal-to-noise ratio digital input -
Signal-to-noise ratio analog input 95 dB (A-weighted)
Distortion (THD) 0.20 %
Damping factor 150
Operating voltage 18 - 36 Volts (max. 5 sec. down to 12 Volts)
Idle current 400 mA
Fuse 3 x 20 A Maxi-fuse (APX)
Power rating DC 24 V ⎓ 53 A max.
Additional features Active, adjustable crossover, bass boost, phase shift, Start-Stop capability, highlevel input with automatic turn on function and Advanced Diagnostics Error Protection (ADEP), bass volume cable remote control
Dimensions (H x W x D) 50 x 320 x 154 mm /
2.00 x 12.60 x 6.06”