Laverna  |  Bar code: 6312559873290

Nano coating for helmet visor

A product specially designed for motorcyclists, intended for the external coating of plastic helmet visors.
€10.89 EUR 12.99 €

▪️ Do you have questions about this product?❓We can consult by phone +370 683 90000 or come to our salon Armatūrinininkų St. 1, Kaunas.

Free delivery in Lithuania from € 100

In Lithuania, Venipak courier delivery is available via 1-2 business days.
Delivery outside Lithuania within 4-10 business days.

Pick up the goods in the store for € 0

Armatūrinininkų St. 1, Kaunas
Working hours: Thursday 9:00-18:00

INFORMACIJA

The coated surface acquires hydrophobic and oleophobic properties.

After impregnating the helmet visor with a nano-coating, the surface becomes easy to clean and maintain. Visibility improves when driving in the rain, and when driving at speeds faster than 60 km/h, an "invisible wiper effect" appears.

Conditions required for coating:

The product must not be used at temperatures below 5 degrees Celsius. During coating, we recommend wearing gloves, as the denatured alcohol in the composition can dry out the skin of the hands.

Product effectiveness: 2-3 months, depending on the harshness of environmental conditions and the intensity of impact on the coated surface (e.g., wears out faster when driving at high speeds, constantly experiencing physical friction).

Preparation:

The surface must be thoroughly cleaned, dry, clean, and grease-free. Do not touch the surface being coated during application (unless you are wearing protective gloves).

Coating:

1. Spray the nano cleaner onto a cloth and wipe the desired area in circular motions. Ensure that the entire surface has been wiped evenly.

2. Take the nano-coating bottle, spray 4-5 times onto a cloth, and rub evenly over the entire cleaned area.

3. The coated surface must not be touched or wetted for at least 2 hours.

Product yield:

8-10 ml/sq.m

Attention:

The product should only be used according to the instructions provided above. If the helmet visor has been impregnated with other products, first apply to a small area and ensure that the product will not react with the previous one.

If you notice that the nano-coating effect is weak in certain areas, repeat the application procedure. Keep out of reach of children! Under no circumstances leave the product in direct sunlight or at temperatures below +5°C. Do not leave near open flames, light sources, electrical appliances. If using the product indoors, the room must be well ventilated. The product must not be transferred to other containers – it may lose its effectiveness.
Back to top