1 2
Silent Coat  |  Bar code: 4751011240720

Silent Coat Bulk, 40 pcs, vibration damping material

Silent Coat - 2mm thick vibration damping material uses self-mass loading to reduce panel resonance and absorb body vibration, converting them into a small amount of heat.
€73.00 EUR

▪️ Do you have questions about this product?❓We can consult by phone +370 683 90000 or come to our salon Armatūrinininkų St. 1, Kaunas.

Free delivery in Lithuania from € 100

In Lithuania, Venipak courier delivery is available via 1-2 business days.
Delivery outside Lithuania within 4-10 business days.

Pick up the goods in the store for € 0

Armatūrinininkų St. 1, Kaunas
Working hours: Thursday 9:00-18:00

INFORMACIJA

Silent Coat - 2mm thick vibration damping material uses self-mass loading to reduce panel resonance and absorb body vibration, converting them into a small amount of heat. By using this material, you can stop interior trim rattling, eliminate road and other external noise in the car, and significantly improve the sound quality of your car audio system.

We recommend using a noise level meter before and after installing vibration and sound insulation materials. This way, you will clearly see the differences, as the human ear does not always notice these differences.






Silent Coat is a polymer-based vibration damping material with an extremely adhesive surface. Thanks to the aluminum foil top layer and unique structure, it is highly effective in converting vibration into thermal energy. Silent Coat is very flexible, which is especially important as it allows it to be applied to any surface contour. It can be applied in the car on all metal surfaces, including the engine hood.

USAGE: Applied in the car on all internal sheet metal surfaces: floor, roof, trunk, wheel arches, pillars, bulkhead between engine and cabin, doors, and engine hood. The adhesive surface is made of highly adhesive mastic. The material does not absorb moisture and has anti-corrosion properties. Additionally, it is recommended to apply sound insulation material Silent Coat Noise Isolator over the vibration damping.

If working in temperatures between 15-55°C, additional heating of the material is not necessary. When heated, the material becomes more flexible, making it easier to adhere to uneven surfaces. Additional heating of the material is only recommended if the ambient working temperature is below 10°C. The surface to be glued must be clean, rust-free, and degreased if necessary.

To facilitate work, you can additionally purchase a 3cm or 5cm roller for bituminous material.



Silent Coat vibration damping material features:
• 2mm thick
• Made from Butyl
• Extremely adhesive mastic
• 0.1mm aluminum foil top surface
• Special, highly elastic anti-resonance surface
• Sheet size 375x 250mm
• 40 sheets included
• Covered area 3.75m²
• Weight 2.9 kg/m²

Manufacturer: Silent Coat, Latvia
Back to top