UBIQUITI UniFi Door Hub, door control device

UniFi Door Hub is a single door control device designed to fully control entry and exit processes.

It is compatible with UniFi Access readers and cameras, providing reliable and efficient access control.

• Two lock connections: 12V or dry contact.
• Additional AUX terminals: For external siren or automatic door opener.
• 4 additional inputs: For connecting sensors or buttons.
• PoE++ power supply: Simple and efficient installation.
• Compatibility:
  • Supports two UniFi Access readers.
  • Supports two UniFi Protect cameras or doorbell devices.

• Mechanical
  Dimensions 174.9 x 126 x 32.9 mm (6.9 x 5 x 1.3")
  Weight 363 g (12.8 oz)
  Enclosure material Polycarbonate
  Mounting material Polycarbonate
  Hardware
  Network interface (5) 10/100/1000 Base-T
  Power method PoE++
  UL 294 Power-limited Class 2 PSU
  UL 60950-1/62368-1 LPS/PS2 PSU
  Max. power consumption Without PoE output: 30W
  With PoE output: 50W
  PoE input 50V DC, 1A
  PoE output PoE passthrough, (4) PoE, 50V DC, total 20W
  LEDs White/blue (Learn more)
  Button (1) Factory reset
  Digital input Request to exit/request to enter/remote release/door position sensor
  Dry output relay Lock: 30V DC, 1A
  Aux: 30V DC, 1A
  Powered output relay Lock: 12V DC, 1A
  Aux: 12V DC, 0.33A
  12V DC, 0.33A
  Recommended max. cable length
  18 AWG
  UACC-Cable-DoorLockRelay length 20
  AWG length 22
  AWG length 24
  AWG length
  UA-Lock-Electric
  (400mA) 100m
  (328 ft) 66 m
  (217 ft) 42 m
  (138 ft) 25 m
  (82 ft)
  UA-Lock-Magnetic-270kg
  (800mA) 46m
  (151 ft) 30 m
  (98 ft) 20 m
  (66 ft) 12 m
  (29 ft)
  UA-Lock-Magnetic-540kg
  (500mA) 80m
  (262 ft) 51 m
  (167 ft) 32 m
  (105 ft) 20 m
  (66 ft)
  Other locks
  (1A) 36 m
  (118 ft) 24 m
  (79 ft) 15 m
  (49 ft) 9 m
  (30 ft)
  PoE cabling requirements Cat 5e cabling is the minimum performance category recommended. The performance category used should match the transmission speed required at the installation site.
  The minimum conductor gauge allowed to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm 2 ) for patch cords; 24 AWG (0.21 mm 2 ) for horizontal or riser cable.
  Operating environment Indoor use only
  Ambient operating temperature 0 to 40° C (32 to 104° F)
  Ambient operating humidity 5 to 95% non-condensing
  UL 294 level Destructive attack: Level I
  Line security: Level I
  Endurance: Level I
  Standby power: Level I
  UL 294 statement Compliance with IEEE 802.3 (at or af) specifications was not verified as part of UL 294.
  The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
  CAN/ULC-60839-11-1 Grade Grade assignment: 1
  Certifications CE, FCC, IC, UL 294, CAN/ULC-60839-11-1
  Document number, and issue date and/or revision level UA-Hub-Door002, V01