UBIQUITI UniFi G2 Reader Pro, NFC Reader and Video Doorbell

INFORMACIJA

UniFi G2 Reader Pro is a next-generation NFC reader and video doorbell designed for both indoor and outdoor use.

DESCRIPTION

The device features advanced features such as facial recognition, door unlocking via NFC card, PIN code or mobile app.

• Unlocking methods:
  • NFC card.
  • PIN code.
  • Facial recognition.
  • UniFi Identity mobile app.
• Intercom functionality:
  • Videos for visitors.
  • Two-way voice communication.
• Installation: ADA-compliant height.
• Resistance: IP55 weather protection.
• Power supply: PoE (Power over Ethernet).

TECHNICAL DATA

• Mechanical
  Dimensions 160 x 40.4 x 40.55 mm (6.3 x 1.59 x 1.6")
  Weight 136 g (4.8 oz)
  Enclosure material Polycarbonate, glass
  Mount material Aluminum alloy
  Wall mounting, gang box
  Weatherproofing IP55
  Hardware
  Network interface (1) GbE RJ45 port
  Connectivity BLE 4.2
  NFC
  Power method PoE
  UL 294 Power-limited Class 2 PSU
  UL 60950-1/62368-1 LPS/PS2 PSU
  Supported voltage range 48V DC
  Max. power consumption 6W
  ESD/EMP protection Air: ±15kV, contact: ±8kV
  Sensor Proximity sensor
  Camera view angle H: 96.67°, V: 123.15°, D: 153.11°
  Microphone Yes
  Speaker (1) 4 ohm, 1.5W
  LEDs R/G/B/W/Amber (Learn more)
  Button (1) Factory reset
  NFC frequency 13.56 MHz
  NFC reading range < 30 mm
  NFC technology ISO/IEC 14443A / 14443B / 15693 / 18092 (Ecma 340)
  MIFARE Classic / MIFARE DESFIRE
  Sony FeliCa™ (ID only)
  NFC Forum tags T1T, T2T, T3T, T4T and T5T
  Operating environment Outdoor use
  Ambient operating temperature Device: -30 to 45° C (-22 to 113° F)
  Display:* -10 to 45° C (14 to 113° F)
  *The display will turn off when the ambient temperature is above/below the display operating temperature, but other functions will remain functional. (Effective after firmware v1.3.28)
  Ambient operating humidity 5 to 90% non-condensing
  Software information The software version of a product can be checked at https://unifi.ui.com
  UL 294 level Destructive attack: Level I
  Line security: Level I
  Endurance: Level I
  Standby power: Level I
  UL 294 statement Compliance with IEEE 802.3 specifications was not verified as part of UL 294.
  The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
  PoE cabling requirements Cat 5e cabling is the minimum performance category recommended. The performance category used should match the transmission speed required at the installation site.
  The minimum conductor gauge allowed to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm 2 ) for patch cords; 24 AWG (0.21 mm 2 ) for horizontal or riser cable.
  CAN/ULC-60839-11-1 Grade Grade assignment: I
  Certifications CE, FCC, IC, UL 294, CAN/ULC-60839-11-1
  Document number, and issue date and/or revision level UA-G2-Pro/UA-G2-Pro-Black, V02
  Software
  Management application UniFi Access: Version 1.5.9 and later