Cambridge Audio Alva Solo, Phono pradinis garso stiprintuvas patefonui

€229.00 EUR

Pristatymas į namus nuo 4.99 €

Lietuvoje Venipak kurjeriu pristatymas per 1-2 darbo dienas.
Pristatymas už Lietuvos ribų per 4-10 darbo dienų.

Atsiimkite parduotuvėje už 0 €

Armatūrininkų g. 1, Kaunas
Darbo laikas: I-V 9:00-18:00

Alva Solo, tai Phono pradinis garso stiprintuvas skirtas patefonui. Šis stiprintuvas sukurtas taip, kad išspaustumėt maksimaliai gerą skambesį iš savo vinilo įrašų kolekcijos!

  • Palaikomas kartridžo tipas: judančio magneto.
  • Įėjimo varža: 47k Omų.
  • Nominalus jautrumas išėjimui: 3.35mV.
  • THD+N 1KHZ (20-20KHZ BW): <0.0025%..

 

Alva Solo Moving Magnet Phono Preamplifier detail

Vinyl as it's Supposed to Sound

Whether you’re dusting off your record collection or embracing analogue through the vinyl revival, there’s a unique experience to be had from the moment you drop the needle on your favourite album. To preserve the unique warmth of the vinyl sound, the Solo phono preamplifier has been carefully designed with a state-of-the-art switch mode power supply and a new surface mounted circuit board layout to reduce unwanted noise.

Alva Solo Moving Magnet Phono Preamplifier rear detail

Why Choose a Dedicated Phono Stage?

Due to the low-level signals created by a turntable, not all hi-fi amplifiers will let you connect directly to a record player. The phono preamplifier boosts this signal to something a power amplifier can work with. The challenge at this stage though is that noise can easily be added.

This is why we’ve designed the Solo around exceptional components that deliver the warm and detailed sound that’s synonymous with vinyl, all without distorting the signal from your moving magnet cartridge. The switch mode power supply improves performance by switching outside of audible frequency to drastically reduce hum and new circuit board layout uses surface-mount components to reduce noise.

Alva Solo Moving Magnet Phono Preamplifier detail

Attention to Detail

If some records in your collection are a little worse for wear, the subsonic filter will help to eliminate low frequency rumbles that can be caused by imperfections within your vinyl. Combine this with the balance control for handling potential cartridge imbalances in your record player (that can cause a difference between the left and right channels) and the result is a detailed experience with accurate soundstage.

Alva Solo Inside Detail

Eco Friendly

The Solo phono preamplifier is green at heart with less than half a watt standby power consumption and auto power down feature if the unit isn’t used after a 20 minute period. This in turn gives the unit the same worldwide voltage for compatibility wherever you are in the world.

 

      SPECIFIKACIJOS

      MAX POWER CONSUMPTION

      10W

      GAIN @ 1KHZ

      39dB

      NOMINAL OUTPUT

      300mV

      SENSITIVITY FOR NOMINAL OUTPUT

      3.35mV

      EQUIVALENT INPUT NOISE (A-WEIGHTED)

      ~0.09uV

      RIAA CURVE ACCURACY

      +/- 0.65dB 30Hz-20kHz

      SIGNAL TO NOISE RATIO GROUNDED INPUTS REF. 1V OUTPUT (20HZ-20KHZ BW)

      >90dB

      THD+N 1KHZ (20-20KHZ BW)

      <0.0025%

      INPUT IMPEDANCE

      47k Ohm

      INPUT CAPACITANCE

      100pF

      OVERLOAD MARGIN

      >30dB

      CROSSTALK @10KHZ

      >85dB

      DIMENSIONS (H X W X D)

      48x176x132 (1.9x6.9x5.2”)

      WEIGHT

      0.68kg/1.5lbs

      WHATS IN THE BOX

      Alva Solo Moving Magnet Phono Preamplifier, User Manual, Safety Guide, Mains lead




      INSTRUKCIJOS

      User Manual (EN).

      Cambridge Audio Alva Solo, Phono pradinis garso stiprintuvas patefonui
      Cambridge Audio

      Cambridge Audio Alva Solo, Phono pradinis garso stiprintuvas patefonui

      €229.00 EUR

      Alva Solo, tai Phono pradinis garso stiprintuvas skirtas patefonui. Šis stiprintuvas sukurtas taip, kad išspaustumėt maksimaliai gerą skambesį iš savo vinilo įrašų kolekcijos!

       

      APRAŠYMAS

      Alva Solo Moving Magnet Phono Preamplifier detail

      Vinyl as it's Supposed to Sound

      Whether you’re dusting off your record collection or embracing analogue through the vinyl revival, there’s a unique experience to be had from the moment you drop the needle on your favourite album. To preserve the unique warmth of the vinyl sound, the Solo phono preamplifier has been carefully designed with a state-of-the-art switch mode power supply and a new surface mounted circuit board layout to reduce unwanted noise.

      Alva Solo Moving Magnet Phono Preamplifier rear detail

      Why Choose a Dedicated Phono Stage?

      Due to the low-level signals created by a turntable, not all hi-fi amplifiers will let you connect directly to a record player. The phono preamplifier boosts this signal to something a power amplifier can work with. The challenge at this stage though is that noise can easily be added.

      This is why we’ve designed the Solo around exceptional components that deliver the warm and detailed sound that’s synonymous with vinyl, all without distorting the signal from your moving magnet cartridge. The switch mode power supply improves performance by switching outside of audible frequency to drastically reduce hum and new circuit board layout uses surface-mount components to reduce noise.

      Alva Solo Moving Magnet Phono Preamplifier detail

      Attention to Detail

      If some records in your collection are a little worse for wear, the subsonic filter will help to eliminate low frequency rumbles that can be caused by imperfections within your vinyl. Combine this with the balance control for handling potential cartridge imbalances in your record player (that can cause a difference between the left and right channels) and the result is a detailed experience with accurate soundstage.

      Alva Solo Inside Detail

      Eco Friendly

      The Solo phono preamplifier is green at heart with less than half a watt standby power consumption and auto power down feature if the unit isn’t used after a 20 minute period. This in turn gives the unit the same worldwide voltage for compatibility wherever you are in the world.

       

      TECHNINIAI DUOMENYS

      SPECIFIKACIJOS

      MAX POWER CONSUMPTION

      10W

      GAIN @ 1KHZ

      39dB

      NOMINAL OUTPUT

      300mV

      SENSITIVITY FOR NOMINAL OUTPUT

      3.35mV

      EQUIVALENT INPUT NOISE (A-WEIGHTED)

      ~0.09uV

      RIAA CURVE ACCURACY

      +/- 0.65dB 30Hz-20kHz

      SIGNAL TO NOISE RATIO GROUNDED INPUTS REF. 1V OUTPUT (20HZ-20KHZ BW)

      >90dB

      THD+N 1KHZ (20-20KHZ BW)

      <0.0025%

      INPUT IMPEDANCE

      47k Ohm

      INPUT CAPACITANCE

      100pF

      OVERLOAD MARGIN

      >30dB

      CROSSTALK @10KHZ

      >85dB

      DIMENSIONS (H X W X D)

      48x176x132 (1.9x6.9x5.2”)

      WEIGHT

      0.68kg/1.5lbs

      WHATS IN THE BOX

      Alva Solo Moving Magnet Phono Preamplifier, User Manual, Safety Guide, Mains lead




      DOKUMENTAI

      INSTRUKCIJOS

      User Manual (EN).

      Žiūrėti produktą

      Alva Solo, tai Phono pradinis garso stiprintuvas skirtas patefonui. Šis stiprintuvas sukurtas taip, kad išspaustumėt maksimaliai gerą skambesį iš savo vinilo įrašų kolekcijos!

      • Palaikomas kartridžo tipas: judančio magneto.
      • Įėjimo varža: 47k Omų.
      • Nominalus jautrumas išėjimui: 3.35mV.
      • THD+N 1KHZ (20-20KHZ BW): <0.0025%..

       

      Alva Solo Moving Magnet Phono Preamplifier detail

      Vinyl as it's Supposed to Sound

      Whether you’re dusting off your record collection or embracing analogue through the vinyl revival, there’s a unique experience to be had from the moment you drop the needle on your favourite album. To preserve the unique warmth of the vinyl sound, the Solo phono preamplifier has been carefully designed with a state-of-the-art switch mode power supply and a new surface mounted circuit board layout to reduce unwanted noise.

      Alva Solo Moving Magnet Phono Preamplifier rear detail

      Why Choose a Dedicated Phono Stage?

      Due to the low-level signals created by a turntable, not all hi-fi amplifiers will let you connect directly to a record player. The phono preamplifier boosts this signal to something a power amplifier can work with. The challenge at this stage though is that noise can easily be added.

      This is why we’ve designed the Solo around exceptional components that deliver the warm and detailed sound that’s synonymous with vinyl, all without distorting the signal from your moving magnet cartridge. The switch mode power supply improves performance by switching outside of audible frequency to drastically reduce hum and new circuit board layout uses surface-mount components to reduce noise.

      Alva Solo Moving Magnet Phono Preamplifier detail

      Attention to Detail

      If some records in your collection are a little worse for wear, the subsonic filter will help to eliminate low frequency rumbles that can be caused by imperfections within your vinyl. Combine this with the balance control for handling potential cartridge imbalances in your record player (that can cause a difference between the left and right channels) and the result is a detailed experience with accurate soundstage.

      Alva Solo Inside Detail

      Eco Friendly

      The Solo phono preamplifier is green at heart with less than half a watt standby power consumption and auto power down feature if the unit isn’t used after a 20 minute period. This in turn gives the unit the same worldwide voltage for compatibility wherever you are in the world.

       

          SPECIFIKACIJOS

          MAX POWER CONSUMPTION

          10W

          GAIN @ 1KHZ

          39dB

          NOMINAL OUTPUT

          300mV

          SENSITIVITY FOR NOMINAL OUTPUT

          3.35mV

          EQUIVALENT INPUT NOISE (A-WEIGHTED)

          ~0.09uV

          RIAA CURVE ACCURACY

          +/- 0.65dB 30Hz-20kHz

          SIGNAL TO NOISE RATIO GROUNDED INPUTS REF. 1V OUTPUT (20HZ-20KHZ BW)

          >90dB

          THD+N 1KHZ (20-20KHZ BW)

          <0.0025%

          INPUT IMPEDANCE

          47k Ohm

          INPUT CAPACITANCE

          100pF

          OVERLOAD MARGIN

          >30dB

          CROSSTALK @10KHZ

          >85dB

          DIMENSIONS (H X W X D)

          48x176x132 (1.9x6.9x5.2”)

          WEIGHT

          0.68kg/1.5lbs

          WHATS IN THE BOX

          Alva Solo Moving Magnet Phono Preamplifier, User Manual, Safety Guide, Mains lead




          INSTRUKCIJOS

          User Manual (EN).