Grado

Grado BLUE3 (MI), kartridžas

169.00 € 199.00 €

Grado BLUE3 (MI), kartridžas yra užsakytas ir bus išsiųstas, kai tik bus sandėlyje.

Siuntimas ir pristatymas

Prekes visoje Lietuvoje (išskyrus Kuršių Neriją) pristato skubių siuntų tarnyba "Venipak" per 1-2 darbo dienas, tiesiai į namus ar darbovietę. Pristatymas yra nemokamas, jeigu prekių suma viršija 100€, kitu atveju taikomas 4,99€ pristatymo mokestis. Kurjeris pieš atveždamas prekes su Jumis susisieks Jūsų nurodytu telefono numeriu ir suderins pristatymo laiką.

"Blue3" naudojama keturių dalių OTL konsolė su "Grado" specifiniu deimantu, sumontuotu ant žalvario įvorės.

  • Tipas: Moving Iron (MI).
  • Atkuriamų dažnių juosta: 10 - 55.000 Hz.
  • Išėjimo lygis: 5.5 mV.
  • Kanalų atskiriamumas (ties 1 Khz): 30 dB.
  • Rekomenduojamas prispaudimo svoris: 1.5 g.
  • Galvutės svoris: 5.5 g.


    TWhat's the difference between Blue3 and Red3?
    Approximately 15% of the Blue3 production run meet higher specifications. These are hand selected from the batch and designated as Red3.

     Grado’s OTL, or optimized transmission line, technology provides an ideal transfer of signal from the surface of the LP to the generator of the system. This technology rejects unwanted resonances and lowers distortion preserving the fundamental and harmonic frequencies of the music. This also helps keep noise generated by the motor system in the cartridge to a minimum.

    Grado’s OTL stylus/cantilever design makes records sound quieter, improves the height, width, and depth of the soundstage, and present more detail than previously obtainable.

    The Red3 is hand assembled by Grado's team in Brooklyn, with some builders having over 25 years of experience. This updated series of cartridges offers excellent tonal balance, dynamics, and realism, for a most rewarding reproduction of vocals and instruments. The coil winding techniques using ultra high purity copper wire, which were honed during the development of the Lineage Series, have let the electrical circuits achieve unison between the four coils in each phono cartridge. This allows for a precise balance between channels and accurate stereo imaging.

    As in all Grado phono cartridges the Red3 is powered by a twin magnet system that optimizes the balance between stereo channels. All internal magnetic circuit parts are held to extremely high tolerances creating the desired stereo imaging. Grado’s patented Flux-Bridger design allows the Red2 to have one of the lowest effective moving mass generating systems while creating an excellent balance throughout the full frequency range.

    SPECIFIKACIJOS

    • Frequency Response: 10-55,000 Hz
    • Principal: MI
    • Channel Separation at 1KHz: 30
    • Input Load: 47K
    • Output at 1KHz 5CM/sec.: 5mV
    • Recommended Tracking Force: 1.5
    • Stylus Type: E
    • Inductance: 45mH
    • Resistance: 475
    • Compliance CUs: 20
    • User replaceable stylus
    • Mounting: S/P
    • Weight: 5.5

            Kategorijos

            Grado BLUE3 (MI), kartridžas
            Grado

            Grado BLUE3 (MI), kartridžas

            169.00 € 199.00 €

            "Blue3" naudojama keturių dalių OTL konsolė su "Grado" specifiniu deimantu, sumontuotu ant žalvario įvorės.


            APRAŠYMAS

            TWhat's the difference between Blue3 and Red3?
            Approximately 15% of the Blue3 production run meet higher specifications. These are hand selected from the batch and designated as Red3.
            Grado’s OTL, or optimized transmission line, technology provides an ideal transfer of signal from the surface of the LP to the generator of the system. This technology rejects unwanted resonances and lowers distortion preserving the fundamental and harmonic frequencies of the music. This also helps keep noise generated by the motor system in the cartridge to a minimum.

            Grado’s OTL stylus/cantilever design makes records sound quieter, improves the height, width, and depth of the soundstage, and present more detail than previously obtainable.

            The Red3 is hand assembled by Grado's team in Brooklyn, with some builders having over 25 years of experience. This updated series of cartridges offers excellent tonal balance, dynamics, and realism, for a most rewarding reproduction of vocals and instruments. The coil winding techniques using ultra high purity copper wire, which were honed during the development of the Lineage Series, have let the electrical circuits achieve unison between the four coils in each phono cartridge. This allows for a precise balance between channels and accurate stereo imaging.

            As in all Grado phono cartridges the Red3 is powered by a twin magnet system that optimizes the balance between stereo channels. All internal magnetic circuit parts are held to extremely high tolerances creating the desired stereo imaging. Grado’s patented Flux-Bridger design allows the Red2 to have one of the lowest effective moving mass generating systems while creating an excellent balance throughout the full frequency range.

            TECHNINIAI DUOMENYS

            SPECIFIKACIJOS

            Žiūrėti produktą

            • Gyvas pokalbis

              Ekspertų nuomonė ir patarimai

            • Pristatymas

              Lietuvoje per 1-2 d.d.

            • Darbo valandos

              Darbo dienomis 9.00 - 18.00

            • Atsiskaitymas

              Patogiausi būdai internetu
            Atgal į viršų

            "Blue3" naudojama keturių dalių OTL konsolė su "Grado" specifiniu deimantu, sumontuotu ant žalvario įvorės.

            • Tipas: Moving Iron (MI).
            • Atkuriamų dažnių juosta: 10 - 55.000 Hz.
            • Išėjimo lygis: 5.5 mV.
            • Kanalų atskiriamumas (ties 1 Khz): 30 dB.
            • Rekomenduojamas prispaudimo svoris: 1.5 g.
            • Galvutės svoris: 5.5 g.


              TWhat's the difference between Blue3 and Red3?
              Approximately 15% of the Blue3 production run meet higher specifications. These are hand selected from the batch and designated as Red3.

               Grado’s OTL, or optimized transmission line, technology provides an ideal transfer of signal from the surface of the LP to the generator of the system. This technology rejects unwanted resonances and lowers distortion preserving the fundamental and harmonic frequencies of the music. This also helps keep noise generated by the motor system in the cartridge to a minimum.

              Grado’s OTL stylus/cantilever design makes records sound quieter, improves the height, width, and depth of the soundstage, and present more detail than previously obtainable.

              The Red3 is hand assembled by Grado's team in Brooklyn, with some builders having over 25 years of experience. This updated series of cartridges offers excellent tonal balance, dynamics, and realism, for a most rewarding reproduction of vocals and instruments. The coil winding techniques using ultra high purity copper wire, which were honed during the development of the Lineage Series, have let the electrical circuits achieve unison between the four coils in each phono cartridge. This allows for a precise balance between channels and accurate stereo imaging.

              As in all Grado phono cartridges the Red3 is powered by a twin magnet system that optimizes the balance between stereo channels. All internal magnetic circuit parts are held to extremely high tolerances creating the desired stereo imaging. Grado’s patented Flux-Bridger design allows the Red2 to have one of the lowest effective moving mass generating systems while creating an excellent balance throughout the full frequency range.

              SPECIFIKACIJOS

              • Frequency Response: 10-55,000 Hz
              • Principal: MI
              • Channel Separation at 1KHz: 30
              • Input Load: 47K
              • Output at 1KHz 5CM/sec.: 5mV
              • Recommended Tracking Force: 1.5
              • Stylus Type: E
              • Inductance: 45mH
              • Resistance: 475
              • Compliance CUs: 20
              • User replaceable stylus
              • Mounting: S/P
              • Weight: 5.5