Dynaudio P4-C80, 160W į lubas montuojamas garsiakalbis

INFORMACIJA

P4-C80 yra didesnės įmontuojamos lubinės kolonėlės, skirtos atkurti galingą garsą didelėse erdvėse. Jos priklauso „Dynaudio Custom Install“ serijai ir pasižymi patikima, aukštos kokybės konstrukcija

-Galia RMS 50W / MAX 160W
-Nominali varža 8 Ohm / Minimali 5 Ohm
-Jautrumas 89 dB
-Dažnių diapazonas: 42Hz – 20kHz

Kaina už 1vnt

APRAŠYMAS

Over and above. Slimline in-ceiling speaker with an 8in woofer.

For larger rooms, or for situations where you want a little more power from your overhead Dolby ATMOS or distributed audio system, the P4-C80 – with its 8in woofer – could be your saviour. Especially if you’re working in a tight space.

The speaker will fit in cavities right down to 87mm deep, meaning you can keep the system totally consistent between rooms or hallways, even if the ceiling space varies at times.

Fitting is a model of simplicity: put the frame in the hole, squeeze down the doglegs to secure it around the ceiling material, then just twist and lock the speaker into place. You don’t need tools, and you don’t even need two hands.

The P4-C80 uses the same materials and technologies that have made Dynaudio so legendary in the high-end audio business for decades. The woofer is made from MSP (Magnesium Silicate Polymer), a proprietary material we developed in the late 1970s and have used ever since. The tweeter is a soft-dome design – variations of which have appeared in some of our most awe-inspiring speakers. And it’s all been tuned and refined by the same people who made those speakers so great.

The final touches are just as easy as the installation itself. Paint the grille to match the room’s décor, then let it snap itself into perfect alignment with its built-in magnets.

Your audio is in good hands.

TECHNINIAI DUOMENYS

In-ceiling 8in
2-way in-ceiling
Tweeter 28mm / 1in
Woofer 200mm / 8in
Frequency response (+/- 3dB) 42Hz – 20kHz
Impedance (nominal/minimum) 8Ω / 5Ω
Continuous power 50W
Long-term power 160W
Sensitivity (dB SPL (2.83V/1m) 89
Tweeter level switch +3dB / 0dB / -3dB
Tweeter orientation Pivoting 360
Diameter/depth 280mm / 90mm
Cut-out dimensions Diameter 260mm
Grille Material Painted steel
Options Round (supplied) / square (optional)
Attachment Magnetic
Paintable Yes

DOKUMENTAI

Vartotojo vadovas (EN)