Neoline saugiklio kabelis skirtas G-TECH X77 vaizdo registratoriui

Saugiklio laidas skirtas Neoline G-TECH X77  vaizdo registratoriui. Laidas naudojamas sujungti DVR tiesiai į automobilio srovės tinklą.

check_circle_outline highlight_off
Yra prekyboje Išparduota
Translation missing: lt.product.general.sku_html
Nuolaida: 19.00 €
Kaina: 19.00 €

Greitas užsakymas

Įveskite savo duomenis ir pateikite užsakymą. Mūsų vadybininkas susisieks su Jumis ir suderins visas pristatymo ir apmokėjimo detales.

Neoline saugiklio kabelis skirtas G-TECH X77 vaizdo registratoriui

Saugiklio laidas skirtas Neoline G-TECH X77  vaizdo registratoriui. Laidas naudojamas sujungti DVR tiesiai į automobilio srovės tinklą.

  • Kabelio iligis: 3 m.
  • Išėjimo srovė: 5V / 1.5A.
  • Savaiminis išsijungimas krenant srovei tinkle (≤ 11.3V).

 

NEOLINE FUSE CORD For G-TECH X77 is designed to connect the DVR directly to the vehicle’s on-board network. When the device is connected with the FUSE CORD, “Parking” mode is able to work. “Parking” mode – when the engine is off, the GPS and the radar module will be disabled, while the DVR continues to work and is connected to the vehicle’s electrical network. After the set time, the hybrid will enter Parking mode. When the G-sensor is triggered, video will be recorded to the “Parking” folder. In order to enter the “Parking” mode for X Series, hold the hot key button for a few seconds. Only G-TECH X77 will go into “Parking” mode automatically.  When the engine is started, the hybrid will switch to the standard mode automatically.

Does not occupy the cigarette lighter’s socket.
Has a built-in fuse.
Length 3m.

SPECIFIKACIJOS

  • Cable length: 3m
  • Output voltage: 5V / 1.5A
  • Shutdown in case of voltage drop on-board network: ≤ 11.3V

JŪSŲ ŽIŪRĖTOS PREKĖS

Išvalyti jūsų žiūrėtas prekes