Ortofon MC Cadenza Red patefono galvutė

1,499.00 €

Ortofon MC Cadenza Red patefono galvutė yra užsakytas ir bus išsiųstas, kai tik bus sandėlyje.


Siuntimas ir pristatymas

Prekes visoje Lietuvoje (išskyrus Kuršių Neriją) pristato skubių siuntų tarnyba "Venipak" per 1-2 darbo dienas, tiesiai į namus ar darbovietę. Pristatymas yra nemokamas, jeigu prekių suma viršija 100€, kitu atveju taikomas 4,99€ pristatymo mokestis. Kurjeris pieš atveždamas prekes su Jumis susisieks Jūsų nurodytu telefono numeriu ir suderins pristatymo laiką.

"Cadenza Red" modelyje naudojamas "Nude Fine Line" stylus su cilindriniu aliuminio kontiveleriu. Jutiklinio antgalio spindulys yra r/R 8/40 µm.

  • Stylus tipas: Nude Fine Line on Alu cantilever.
  • Dažnių juosta: - 20 Hz - 20 kHz - +3/-1.
  • Spaudimo galia: 2.2-2.7 g (22-27 mN).

The Cadenza Mono model is made with a Nude Fine Line stylus and a cylindrical aluminium cantilever. The stylus radius is r/R 8/40 µm.
The coils are made from 6NX (99.9999 %) pure silver wire. An improved winding process on the armature allows a better channel balance.
For easy use the pins are connected so you get the same signal from both pairs of connecting pins.
Sharing internal build with the Cadenza Red and with optimized adjustments for mono playback the sound is relaxed, homogeneous and moderate.


SPECIFIKACIJOS

  • Output voltage at 1 kHz 5 cm/sec - 0.45 mV
  • Frequency response 20 Hz - 20 kHz - +3/-1
  • Tracking ability at 315 Hz at recommended tracking force *) - 70 μm
  • Compliance, dynamic, lateral - 12 μm/mN
  • Stylus type - Nude Fine Line on Alu cantilever
  • Stylus tip radius - r/R 8/40 μm
  • Tracking force range - 2.2-2.7 g (22-27 mN)
  • Tracking force recommended - 2.5 g (25 mN)
  • Tracking angle - 20º
  • Internal impedance, DC resistance - 5 Ohm
  • Recommended load impedance - 50-500 Ohm
  • Cartridge body material - Stainless steel Aluminium
  • Cartridge colour - Natural/Black
  • Cartridge weight - 10.7 g

 

INSTRUKCIJOS

User Manual (EN).

Ortofon MC Cadenza Red patefono galvutė
Ortofon

Ortofon MC Cadenza Red patefono galvutė

1,499.00 €

"Cadenza Red" modelyje naudojamas "Nude Fine Line" stylus su cilindriniu aliuminio kontiveleriu. Jutiklinio antgalio spindulys yra r/R 8/40 µm.

APRAŠYMAS

The Cadenza Mono model is made with a Nude Fine Line stylus and a cylindrical aluminium cantilever. The stylus radius is r/R 8/40 µm.
The coils are made from 6NX (99.9999 %) pure silver wire. An improved winding process on the armature allows a better channel balance.
For easy use the pins are connected so you get the same signal from both pairs of connecting pins.
Sharing internal build with the Cadenza Red and with optimized adjustments for mono playback the sound is relaxed, homogeneous and moderate.


TECHNINIAI DUOMENYS

SPECIFIKACIJOS

 

DOKUMENTAI

INSTRUKCIJOS

User Manual (EN).

Žiūrėti produktą

"Cadenza Red" modelyje naudojamas "Nude Fine Line" stylus su cilindriniu aliuminio kontiveleriu. Jutiklinio antgalio spindulys yra r/R 8/40 µm.

  • Stylus tipas: Nude Fine Line on Alu cantilever.
  • Dažnių juosta: - 20 Hz - 20 kHz - +3/-1.
  • Spaudimo galia: 2.2-2.7 g (22-27 mN).

The Cadenza Mono model is made with a Nude Fine Line stylus and a cylindrical aluminium cantilever. The stylus radius is r/R 8/40 µm.
The coils are made from 6NX (99.9999 %) pure silver wire. An improved winding process on the armature allows a better channel balance.
For easy use the pins are connected so you get the same signal from both pairs of connecting pins.
Sharing internal build with the Cadenza Red and with optimized adjustments for mono playback the sound is relaxed, homogeneous and moderate.


SPECIFIKACIJOS

  • Output voltage at 1 kHz 5 cm/sec - 0.45 mV
  • Frequency response 20 Hz - 20 kHz - +3/-1
  • Tracking ability at 315 Hz at recommended tracking force *) - 70 μm
  • Compliance, dynamic, lateral - 12 μm/mN
  • Stylus type - Nude Fine Line on Alu cantilever
  • Stylus tip radius - r/R 8/40 μm
  • Tracking force range - 2.2-2.7 g (22-27 mN)
  • Tracking force recommended - 2.5 g (25 mN)
  • Tracking angle - 20º
  • Internal impedance, DC resistance - 5 Ohm
  • Recommended load impedance - 50-500 Ohm
  • Cartridge body material - Stainless steel Aluminium
  • Cartridge colour - Natural/Black
  • Cartridge weight - 10.7 g

 

INSTRUKCIJOS

User Manual (EN).