1 3
Alpine

Alpine PDP-E800DSP Skaitmeninis DSP Stiprintuvas

€650.00 EUR

Alpine PDP-E800DSP Skaitmeninis DSP Stiprintuvas - prieš pirkdami pasiteiraukite ar šią prekę turime sandėlyje, jei neturime ji gali būti užsakyta ir atvykti per 2-21 dieną.

Pristatymas į namus nuo 4.99 €

Venipak kurjeriu per 1-2 darbo dienas.

Atsiimkite parduotuvėje 0 €

Armatūrininkų g. 1, Kaunas
Darbo laikas: I-V 9:00-18:00

„Alpine“ pristato naują PDP-E800DSP skaitmeninį DSP stiprintuvą. Šis nuostabus "viskas viename" sprendimas leidžia atnaujinti beveik bet kokios transporto priemonės garso sistemos kokybę!

  • 8 kanalų skaitmeninė korekcija.
  • Parametrinis EQ ir X-Over.
  • D-klasės stiprintuvas.
  • USB jungtys.


 

Alpine introduces the all-new PDP-E800DSP Digital DSP amplifier. This amazing all-in-one solution allows sound upgrading for virtually any vehicle with its incredible versatility and connectivity options.

Featuring 6 input channels (both pre-amp and speaker level), as well as up to 8 fully configurable output channels allow for a very wide range of system applications and flexibility. Tune your sound with a professional 240-band Parametric EQ, 8 channel digital time correction, as well as a 8 channel digital crossover.

For system setup, use the Alpine PC software to connect wirelessly or via USB to the PDP-E800DSP. The very intuitive and easy-to-use software allows for full control over all settings and displays all data in a very nice graphical user interface.

The free-of-charge Alpine Remote Control for PDP-E800DSP app (available for both Android and iPhone) lets you control your DSP amp on the go and includes the most important functions, such as master-volume, subwoofer level, source selection, pre-set recall and more.

The PDP-E800DSP is the perfect solution especially for OEM upgrades, where the factory radio can’t be replaced by an after-market solution to get better sound. The Alpine DSP amp simply adds-on to the existing OEM system, allowing you to build any sound system around your factory system.

Alpine“ pristato naują PDP-E800DSP skaitmeninį DSP stiprintuvą. Šis nuostabus "viskas viename" sprendimas leidžia atnaujinti beveik bet kokios transporto priemonės garso sistemos kokybę!

 

240-band Parametric EQ and X-Over

The Parametric EQ is very easy to use: 30 bands per channel can be simply adjusted with sliders in real-time. The display gives you visual feedback of your adjustments. You can also set the digital X-Over for all 8 channels separately (HP, LP, BP 6/12/18/24dB/30dB, type of filter Butterworth, Bessel, Chebyshev selectable). There is also a Phase Inversion (0,180) possible.

8-Channel Digital Time Correction

Use the graphical user interface to adjust the time delay for each speaker / channel separately. You can adjust the delay by cm, inches or ms. You can also delay whole groups of channels.

Analog routing

With this tool you can setup which input channel is routed to which output channel (in percent). This allows you for example, to create a center channel out of 2 front channels.

Source gain adjustment

You can adjust the gain of each analogue input from -15dB to 0dB to achieve the perfect input sensitivity of your source.

SPECIFIKACIJOS

PAGRINDINIAI DUOMENYS

  • 6 high-level inputs for OEM system integration
  • 6 analog Pre-Amp inputs (RCA) for aftermarket head unit connectivity
  • 1 digital TOSLINK/SPDIF input
  • Up to 8 speaker outputs with high power rating
  • 110dB signal-to-noise ratio (digital input)
  • Channel separation > 75dB
  • USB Device input for DSP setup by PC
  • Wireless connection with separate module (amp setup) for PC only, or wireless audio streaming (smart phone or PC))
  • Class-D amplifier with fully digital audio path
  • ADCs by Burr Brown
  • Remote app for iOS and Android with basic control functions (Master level, Sub level, Preset recall, source selection)
  • Pre-amp output (copy from channel 8, for external sub woofer amp)

AMP

  • BurrBrown A/D conversion
  • Full digital audio path
  • High output power capability
  • Total power 700 Watt RMS at 4 Ω
  • 100 Watt per channel at 4 Ω
  • 120 Watt per channel at 2 Ω
  • 200 Watt at 2 Ω (2 channels in parallel mode)
  • Advanced diagnostics for each output channels (shortcut, overheat, clipping)
  • Start-Stop Engine compatible
  • Load Capability: 4 – 2 Ω
  • Parallelized output supported

DSP

  • Latest Analog Device chip (ADAU1452)
  • Up to 8 speaker outputs with independent adjustable output level
  • Independent or linkable setups for all output channels
  • Delay on each channel up to 14,57ms, 0.01msec steps
  • 30-band Graphic Equalizer per channel with configurable frequency, Q (from 1 up to 15) and Gain (-10dB /+10 dB)
  • Digital X-Over for each channel (HP, LP, BP) 6/12/18/24dB/30dB, type of filter (Butterworth, Bessel, Chebyshev) selectable
  • Phase Inversion (0,180)
  • Master Volume (0 – 42dB)
  • Sub control (0 - 15 dB)
  • Possibility to save/load up to 6 presets on DSP
  • Settings can be secured by certificates
  • Free adjustable analog routing (example: channel mixing for center channel or 3-way input signal)
  • EQ ON/OFF possible (for each channel)
  • Delay grouping for easier TCR adjustment (up to 4 groups possible)
  • TCR ON/OFF for each channel possible
  • TCR help calculation for beginners
  • Overview page for all settings
  • Live monitor (for battery voltage and amp temperature)
  • Turn ON by signal or wire
  • Alpine RUX-KNOB2 ready (master volume or sub level)
  • Additional gain on analog input (+6; +9db ). For sources with lower pre-amp level than 2 Volts

Dimesions

  • Dimensions Width 220mm Height 50mm Depth 150mm
  • Weight 1.6kg

 

Naudotojo instrukcija / User manual.

Kategorijos

Alpine PDP-E800DSP Skaitmeninis DSP Stiprintuvas
Alpine

Alpine PDP-E800DSP Skaitmeninis DSP Stiprintuvas

€650.00 EUR

„Alpine“ pristato naują PDP-E800DSP skaitmeninį DSP stiprintuvą. Šis nuostabus "viskas viename" sprendimas leidžia atnaujinti beveik bet kokios transporto priemonės garso sistemos kokybę!


VIDEO


APRAŠYMAS

Alpine introduces the all-new PDP-E800DSP Digital DSP amplifier. This amazing all-in-one solution allows sound upgrading for virtually any vehicle with its incredible versatility and connectivity options.

Featuring 6 input channels (both pre-amp and speaker level), as well as up to 8 fully configurable output channels allow for a very wide range of system applications and flexibility. Tune your sound with a professional 240-band Parametric EQ, 8 channel digital time correction, as well as a 8 channel digital crossover.

For system setup, use the Alpine PC software to connect wirelessly or via USB to the PDP-E800DSP. The very intuitive and easy-to-use software allows for full control over all settings and displays all data in a very nice graphical user interface.

The free-of-charge Alpine Remote Control for PDP-E800DSP app (available for both Android and iPhone) lets you control your DSP amp on the go and includes the most important functions, such as master-volume, subwoofer level, source selection, pre-set recall and more.

The PDP-E800DSP is the perfect solution especially for OEM upgrades, where the factory radio can’t be replaced by an after-market solution to get better sound. The Alpine DSP amp simply adds-on to the existing OEM system, allowing you to build any sound system around your factory system.

Alpine“ pristato naują PDP-E800DSP skaitmeninį DSP stiprintuvą. Šis nuostabus "viskas viename" sprendimas leidžia atnaujinti beveik bet kokios transporto priemonės garso sistemos kokybę!

 

240-band Parametric EQ and X-Over

The Parametric EQ is very easy to use: 30 bands per channel can be simply adjusted with sliders in real-time. The display gives you visual feedback of your adjustments. You can also set the digital X-Over for all 8 channels separately (HP, LP, BP 6/12/18/24dB/30dB, type of filter Butterworth, Bessel, Chebyshev selectable). There is also a Phase Inversion (0,180) possible.

8-Channel Digital Time Correction

Use the graphical user interface to adjust the time delay for each speaker / channel separately. You can adjust the delay by cm, inches or ms. You can also delay whole groups of channels.

Analog routing

With this tool you can setup which input channel is routed to which output channel (in percent). This allows you for example, to create a center channel out of 2 front channels.

Source gain adjustment

You can adjust the gain of each analogue input from -15dB to 0dB to achieve the perfect input sensitivity of your source.

TECHNINIAI DUOMENYS

SPECIFIKACIJOS

PAGRINDINIAI DUOMENYS

  • 6 high-level inputs for OEM system integration
  • 6 analog Pre-Amp inputs (RCA) for aftermarket head unit connectivity
  • 1 digital TOSLINK/SPDIF input
  • Up to 8 speaker outputs with high power rating
  • 110dB signal-to-noise ratio (digital input)
  • Channel separation > 75dB
  • USB Device input for DSP setup by PC
  • Wireless connection with separate module (amp setup) for PC only, or wireless audio streaming (smart phone or PC))
  • Class-D amplifier with fully digital audio path
  • ADCs by Burr Brown
  • Remote app for iOS and Android with basic control functions (Master level, Sub level, Preset recall, source selection)
  • Pre-amp output (copy from channel 8, for external sub woofer amp)

AMP

  • BurrBrown A/D conversion
  • Full digital audio path
  • High output power capability
  • Total power 700 Watt RMS at 4 Ω
  • 100 Watt per channel at 4 Ω
  • 120 Watt per channel at 2 Ω
  • 200 Watt at 2 Ω (2 channels in parallel mode)
  • Advanced diagnostics for each output channels (shortcut, overheat, clipping)
  • Start-Stop Engine compatible
  • Load Capability: 4 – 2 Ω
  • Parallelized output supported

DSP

  • Latest Analog Device chip (ADAU1452)
  • Up to 8 speaker outputs with independent adjustable output level
  • Independent or linkable setups for all output channels
  • Delay on each channel up to 14,57ms, 0.01msec steps
  • 30-band Graphic Equalizer per channel with configurable frequency, Q (from 1 up to 15) and Gain (-10dB /+10 dB)
  • Digital X-Over for each channel (HP, LP, BP) 6/12/18/24dB/30dB, type of filter (Butterworth, Bessel, Chebyshev) selectable
  • Phase Inversion (0,180)
  • Master Volume (0 – 42dB)
  • Sub control (0 - 15 dB)
  • Possibility to save/load up to 6 presets on DSP
  • Settings can be secured by certificates
  • Free adjustable analog routing (example: channel mixing for center channel or 3-way input signal)
  • EQ ON/OFF possible (for each channel)
  • Delay grouping for easier TCR adjustment (up to 4 groups possible)
  • TCR ON/OFF for each channel possible
  • TCR help calculation for beginners
  • Overview page for all settings
  • Live monitor (for battery voltage and amp temperature)
  • Turn ON by signal or wire
  • Alpine RUX-KNOB2 ready (master volume or sub level)
  • Additional gain on analog input (+6; +9db ). For sources with lower pre-amp level than 2 Volts

Dimesions

  • Dimensions Width 220mm Height 50mm Depth 150mm
  • Weight 1.6kg

 

Naudotojo instrukcija / User manual.

Žiūrėti produktą
Atgal į viršų

„Alpine“ pristato naują PDP-E800DSP skaitmeninį DSP stiprintuvą. Šis nuostabus "viskas viename" sprendimas leidžia atnaujinti beveik bet kokios transporto priemonės garso sistemos kokybę!

  • 8 kanalų skaitmeninė korekcija.
  • Parametrinis EQ ir X-Over.
  • D-klasės stiprintuvas.
  • USB jungtys.


 

Alpine introduces the all-new PDP-E800DSP Digital DSP amplifier. This amazing all-in-one solution allows sound upgrading for virtually any vehicle with its incredible versatility and connectivity options.

Featuring 6 input channels (both pre-amp and speaker level), as well as up to 8 fully configurable output channels allow for a very wide range of system applications and flexibility. Tune your sound with a professional 240-band Parametric EQ, 8 channel digital time correction, as well as a 8 channel digital crossover.

For system setup, use the Alpine PC software to connect wirelessly or via USB to the PDP-E800DSP. The very intuitive and easy-to-use software allows for full control over all settings and displays all data in a very nice graphical user interface.

The free-of-charge Alpine Remote Control for PDP-E800DSP app (available for both Android and iPhone) lets you control your DSP amp on the go and includes the most important functions, such as master-volume, subwoofer level, source selection, pre-set recall and more.

The PDP-E800DSP is the perfect solution especially for OEM upgrades, where the factory radio can’t be replaced by an after-market solution to get better sound. The Alpine DSP amp simply adds-on to the existing OEM system, allowing you to build any sound system around your factory system.

Alpine“ pristato naują PDP-E800DSP skaitmeninį DSP stiprintuvą. Šis nuostabus "viskas viename" sprendimas leidžia atnaujinti beveik bet kokios transporto priemonės garso sistemos kokybę!

 

240-band Parametric EQ and X-Over

The Parametric EQ is very easy to use: 30 bands per channel can be simply adjusted with sliders in real-time. The display gives you visual feedback of your adjustments. You can also set the digital X-Over for all 8 channels separately (HP, LP, BP 6/12/18/24dB/30dB, type of filter Butterworth, Bessel, Chebyshev selectable). There is also a Phase Inversion (0,180) possible.

8-Channel Digital Time Correction

Use the graphical user interface to adjust the time delay for each speaker / channel separately. You can adjust the delay by cm, inches or ms. You can also delay whole groups of channels.

Analog routing

With this tool you can setup which input channel is routed to which output channel (in percent). This allows you for example, to create a center channel out of 2 front channels.

Source gain adjustment

You can adjust the gain of each analogue input from -15dB to 0dB to achieve the perfect input sensitivity of your source.

SPECIFIKACIJOS

PAGRINDINIAI DUOMENYS

  • 6 high-level inputs for OEM system integration
  • 6 analog Pre-Amp inputs (RCA) for aftermarket head unit connectivity
  • 1 digital TOSLINK/SPDIF input
  • Up to 8 speaker outputs with high power rating
  • 110dB signal-to-noise ratio (digital input)
  • Channel separation > 75dB
  • USB Device input for DSP setup by PC
  • Wireless connection with separate module (amp setup) for PC only, or wireless audio streaming (smart phone or PC))
  • Class-D amplifier with fully digital audio path
  • ADCs by Burr Brown
  • Remote app for iOS and Android with basic control functions (Master level, Sub level, Preset recall, source selection)
  • Pre-amp output (copy from channel 8, for external sub woofer amp)

AMP

  • BurrBrown A/D conversion
  • Full digital audio path
  • High output power capability
  • Total power 700 Watt RMS at 4 Ω
  • 100 Watt per channel at 4 Ω
  • 120 Watt per channel at 2 Ω
  • 200 Watt at 2 Ω (2 channels in parallel mode)
  • Advanced diagnostics for each output channels (shortcut, overheat, clipping)
  • Start-Stop Engine compatible
  • Load Capability: 4 – 2 Ω
  • Parallelized output supported

DSP

  • Latest Analog Device chip (ADAU1452)
  • Up to 8 speaker outputs with independent adjustable output level
  • Independent or linkable setups for all output channels
  • Delay on each channel up to 14,57ms, 0.01msec steps
  • 30-band Graphic Equalizer per channel with configurable frequency, Q (from 1 up to 15) and Gain (-10dB /+10 dB)
  • Digital X-Over for each channel (HP, LP, BP) 6/12/18/24dB/30dB, type of filter (Butterworth, Bessel, Chebyshev) selectable
  • Phase Inversion (0,180)
  • Master Volume (0 – 42dB)
  • Sub control (0 - 15 dB)
  • Possibility to save/load up to 6 presets on DSP
  • Settings can be secured by certificates
  • Free adjustable analog routing (example: channel mixing for center channel or 3-way input signal)
  • EQ ON/OFF possible (for each channel)
  • Delay grouping for easier TCR adjustment (up to 4 groups possible)
  • TCR ON/OFF for each channel possible
  • TCR help calculation for beginners
  • Overview page for all settings
  • Live monitor (for battery voltage and amp temperature)
  • Turn ON by signal or wire
  • Alpine RUX-KNOB2 ready (master volume or sub level)
  • Additional gain on analog input (+6; +9db ). For sources with lower pre-amp level than 2 Volts

Dimesions

  • Dimensions Width 220mm Height 50mm Depth 150mm
  • Weight 1.6kg

 

Naudotojo instrukcija / User manual.