Audison APBX 8 DS, automobilinė žemų dažnių garso kolonėlė

287.00 €

Audison APBX 8 DS, automobilinė žemų dažnių garso kolonėlė yra užsakytas ir bus išsiųstas, kai tik bus sandėlyje.


Siuntimas ir pristatymas

Prekes visoje Lietuvoje (išskyrus Kuršių Neriją) pristato skubių siuntų tarnyba "Venipak" per 1-2 darbo dienas, tiesiai į namus ar darbovietę. Pristatymas yra nemokamas, jeigu prekių suma viršija 100€, kitu atveju taikomas 4,99€ pristatymo mokestis. Kurjeris pieš atveždamas prekes su Jumis susisieks Jūsų nurodytu telefono numeriu ir suderins pristatymo laiką.

Automobilinė žemų dažnių garso kolonėlė, kuri perkels Jūsų žemų dažnių patirtį į kitą lygį. 

  • Rekomend. stiprintuvo galia: 500W.
  • SSP (Sub Smart Plug) terminalų blokas.
  • 2S² (2 pusės / 2 garsai) dizainas.

 

The APBX 8 DS loaded enclosure provides the highest performance/ size ratio. For this purpose an 8.5 lt. sealed enclosure with a 4+4 ohm dual voice-coil configuration was adopted to exploit the full power of an AP5.9 bit (paralleling voice coils for a 2 ohm load) or with two pairs of AP8.9 bit bridged channels (one bridged pair of channels to each voice coil). The speakers high excursion capability allows the use of the proprietary BASS BOOST of AP bit amplifiers to make use of all the available power for rich and dynamic bass.

  • Ultra-low profile (5.16 in. / 131 mm) box with sealed design perfectly
    tuned to fully exploit the APS 8 D driver.
  • 2S² (2 Sides/2 Sounds) design provides the ability to choose between
    Down-Firing mounting to increase the low-frequency extension and
    Up-Firing install to obtain more punch and definition.
  • Leveling feet with velcro inserts included for a secure grip with the
    carpet while maintaining easy removal.
  • SSP (Sub Smart Plug) features both traditional push contacts and a
    Plug-&-Play terminal block to easily configure the impedance as required
    and provides a quick release.
  • Rounded corners allow easy positioning in the trunk and act as
    reinforcement to reduce enclosure resonance.
  • Special designed cone-dustcap-basket geometry which guarantees a
    long linear excursion capability (9 mm, one-way).
  • Massive driver motor assembly, optimized with FEM (Finite Element
    Modeling) for perfect control under high excursion conditions.
  • Water-repellent pressed paper 8 in. cone, featuring a profile developed
    with FEM simulation and optimized with the Klippel Scan Vibrometer. Specifically developed to be combined with either AP1 D mono or AP4.9
    bit/AP4 D (2 CH bridged) amplifiers taking advantage of the bass boost
    feature and integrated parametric equalizer of the built-in DSP.
  • Sturdy metal grid included for a total protection of the subwoofer driver.

 

    SPECIFIKACIJOS

    TECHNICAL SPECS

    Size 200 mm
    Power Handling - Peak 500 W
    Power Handling - Continuous 250 W
    Magnet Material HIGH DENSITY FLUX FERRITE
    Cone Material WATER REPELLENT PRESSED PAPER

    DIMENSIONS

    Dimension A 374 mm
    Dimension B 334 mm
    Dimension C 109 mm


    INSTRUKCIJOS

    User Manual (EN).

    Audison APBX 8 DS, automobilinė žemų dažnių garso kolonėlė
    Audison

    Audison APBX 8 DS, automobilinė žemų dažnių garso kolonėlė

    287.00 €

    Automobilinė žemų dažnių garso kolonėlė, kuri perkels Jūsų žemų dažnių patirtį į kitą lygį. 

     

    APRAŠYMAS

    The APBX 8 DS loaded enclosure provides the highest performance/ size ratio. For this purpose an 8.5 lt. sealed enclosure with a 4+4 ohm dual voice-coil configuration was adopted to exploit the full power of an AP5.9 bit (paralleling voice coils for a 2 ohm load) or with two pairs of AP8.9 bit bridged channels (one bridged pair of channels to each voice coil). The speakers high excursion capability allows the use of the proprietary BASS BOOST of AP bit amplifiers to make use of all the available power for rich and dynamic bass.

     

      TECHNINIAI DUOMENYS

      SPECIFIKACIJOS

      TECHNICAL SPECS

      Size 200 mm
      Power Handling - Peak 500 W
      Power Handling - Continuous 250 W
      Magnet Material HIGH DENSITY FLUX FERRITE
      Cone Material WATER REPELLENT PRESSED PAPER

      DIMENSIONS

      Dimension A 374 mm
      Dimension B 334 mm
      Dimension C 109 mm


      DOKUMENTAI

      INSTRUKCIJOS

      User Manual (EN).

      Žiūrėti produktą

      Automobilinė žemų dažnių garso kolonėlė, kuri perkels Jūsų žemų dažnių patirtį į kitą lygį. 

      • Rekomend. stiprintuvo galia: 500W.
      • SSP (Sub Smart Plug) terminalų blokas.
      • 2S² (2 pusės / 2 garsai) dizainas.

       

      The APBX 8 DS loaded enclosure provides the highest performance/ size ratio. For this purpose an 8.5 lt. sealed enclosure with a 4+4 ohm dual voice-coil configuration was adopted to exploit the full power of an AP5.9 bit (paralleling voice coils for a 2 ohm load) or with two pairs of AP8.9 bit bridged channels (one bridged pair of channels to each voice coil). The speakers high excursion capability allows the use of the proprietary BASS BOOST of AP bit amplifiers to make use of all the available power for rich and dynamic bass.

      • Ultra-low profile (5.16 in. / 131 mm) box with sealed design perfectly
        tuned to fully exploit the APS 8 D driver.
      • 2S² (2 Sides/2 Sounds) design provides the ability to choose between
        Down-Firing mounting to increase the low-frequency extension and
        Up-Firing install to obtain more punch and definition.
      • Leveling feet with velcro inserts included for a secure grip with the
        carpet while maintaining easy removal.
      • SSP (Sub Smart Plug) features both traditional push contacts and a
        Plug-&-Play terminal block to easily configure the impedance as required
        and provides a quick release.
      • Rounded corners allow easy positioning in the trunk and act as
        reinforcement to reduce enclosure resonance.
      • Special designed cone-dustcap-basket geometry which guarantees a
        long linear excursion capability (9 mm, one-way).
      • Massive driver motor assembly, optimized with FEM (Finite Element
        Modeling) for perfect control under high excursion conditions.
      • Water-repellent pressed paper 8 in. cone, featuring a profile developed
        with FEM simulation and optimized with the Klippel Scan Vibrometer. Specifically developed to be combined with either AP1 D mono or AP4.9
        bit/AP4 D (2 CH bridged) amplifiers taking advantage of the bass boost
        feature and integrated parametric equalizer of the built-in DSP.
      • Sturdy metal grid included for a total protection of the subwoofer driver.

       

        SPECIFIKACIJOS

        TECHNICAL SPECS

        Size 200 mm
        Power Handling - Peak 500 W
        Power Handling - Continuous 250 W
        Magnet Material HIGH DENSITY FLUX FERRITE
        Cone Material WATER REPELLENT PRESSED PAPER

        DIMENSIONS

        Dimension A 374 mm
        Dimension B 334 mm
        Dimension C 109 mm


        INSTRUKCIJOS

        User Manual (EN).