Grado Black3, kartridžas

129.00 €

Grado Black3, kartridžas yra užsakytas ir bus išsiųstas, kai tik bus sandėlyje.


Siuntimas ir pristatymas

Prekes visoje Lietuvoje (išskyrus Kuršių Neriją) pristato skubių siuntų tarnyba "Venipak" per 1-2 darbo dienas, tiesiai į namus ar darbovietę. Pristatymas yra nemokamas, jeigu prekių suma viršija 100€, kitu atveju taikomas 4,99€ pristatymo mokestis. Kurjeris pieš atveždamas prekes su Jumis susisieks Jūsų nurodytu telefono numeriu ir suderins pristatymo laiką.

Prestige serijos, prabanga, išskirtine surinkimo kokybe (surinkta rankomis) pasižymintis kartridžas iš Grado. 

  • Kartridže naudojamos tik prabangiausios medžiagos.
  • Dažnių juosta: : 10-55,000 Hz
  • Dvigubo magneto sistema.
  • Flux-Bridge™ technologija.
  • Kontileveris: Deimantinis galiukas.

 

Color me awesome

Image

Hand-Built in Brooklyn

Image

Diamond Tipped

Image

Twin Magnet System

Image

Patented Flux-Bridge™

Image

Ultra High Purity Copper Coil

Image

Four Coil Unison

Image

De-Stressed Chasis

Image

Swiss Screw Machined

Both the Black3 and Green3 use a three piece OTL cantilever that has a Grado specific diamond mounted on a brass bushing. The Green3 are hand selected from Black3 production runs which meet higher test specifications. Approximately 15% of the run usually exhibits these specs and become a Green3.

Grado’s OTL, or optimized transmission line, technology provides an ideal transfer of signal from the surface of the LP to the generator of the system. This technology rejects unwanted resonances and lowers distortion preserving the fundamental and harmonic frequencies of the music. This also helps keep noise generated by the motor system in the cartridge to a minimum.

Grado’s OTL stylus/cantilever design makes records sound quieter, improves the height, width, and depth of the soundstage, and present more detail than previously obtainable.

The Black3 & Green3 are all hand assembled by our team in Brooklyn, with some builders having over 25 years of experience. With the recent development of the highly received Lineage Series of cartridges, we were able to have a trickle down of technology and bring a new technique to the Black3 & Green3. This updated series of cartridges offers excellent tonal balance, dynamics, and realism, for a most rewarding reproduction of vocals and instruments. Our coil winding techniques, using ultra high purity copper wire which were honed during the development of the Lineage Series, have let the electrical circuits achieve unison between the four coils in each phono cartridge. This allows for a precise balance between channels and accurate stereo imaging.

As in all Grado phono cartridges the Black3 & Green3 are powered by a twin magnet system that optimizes the balance between stereo channels. All internal magnetic circuit parts are held to extremely high tolerances creating the desired stereo imaging. Grado’s patented Flux-Bridger design allows the Black3 & Green3 to have one of the lowest effective moving mass generating systems while creating an excellent balance throughout the full frequency range.

The development of the Epoch in the Lineage Series gave us an in-depth experience with using an outer housing as a damping device. This led to the creation of a process which de-stresses the chassis and dissipates unwanted energy & resonant frequencies, allowing the desired signal to travel freely.

the Grado Prestige Green is a cartridge most people will find thoroughly enjoyable for nearly all kinds of music, especially if their system is very slightly laid back. At it's price, it simply can't be beaten! If you have a moderately-priced turntable lurking in your closet, pull it out, get a Grado prestige Green

Thom Moon / $ensible Sound magazine

 

SPECIFIKACIJOS

  • Frequency Response: 10-55,000 Hz
  • Principal: MI
  • Channel Separation at 1KHz: 30
  • Input Load: 47K
  • Output at 1KHz 5CM/sec.: 5mV
  • Recommended Tracking Force: 1.5
  • Stylus Type: E
  • Inductance: 45mH
  • Resistance: 475
  • Compliance CUs: 20
  • Stylus Replacement: U
  • Mounting: S/P
  • Weight: 5.5

                        Grado Black3, kartridžas
                        Grado

                        Grado Black3, kartridžas

                        129.00 €

                        Prestige serijos, prabanga, išskirtine surinkimo kokybe (surinkta rankomis) pasižymintis kartridžas iš Grado. 

                         

                        APRAŠYMAS

                        Color me awesome

                        Both the Black3 and Green3 use a three piece OTL cantilever that has a Grado specific diamond mounted on a brass bushing. The Green3 are hand selected from Black3 production runs which meet higher test specifications. Approximately 15% of the run usually exhibits these specs and become a Green3.

                        Grado’s OTL, or optimized transmission line, technology provides an ideal transfer of signal from the surface of the LP to the generator of the system. This technology rejects unwanted resonances and lowers distortion preserving the fundamental and harmonic frequencies of the music. This also helps keep noise generated by the motor system in the cartridge to a minimum.

                        Grado’s OTL stylus/cantilever design makes records sound quieter, improves the height, width, and depth of the soundstage, and present more detail than previously obtainable.

                        The Black3 & Green3 are all hand assembled by our team in Brooklyn, with some builders having over 25 years of experience. With the recent development of the highly received Lineage Series of cartridges, we were able to have a trickle down of technology and bring a new technique to the Black3 & Green3. This updated series of cartridges offers excellent tonal balance, dynamics, and realism, for a most rewarding reproduction of vocals and instruments. Our coil winding techniques, using ultra high purity copper wire which were honed during the development of the Lineage Series, have let the electrical circuits achieve unison between the four coils in each phono cartridge. This allows for a precise balance between channels and accurate stereo imaging.

                        As in all Grado phono cartridges the Black3 & Green3 are powered by a twin magnet system that optimizes the balance between stereo channels. All internal magnetic circuit parts are held to extremely high tolerances creating the desired stereo imaging. Grado’s patented Flux-Bridger design allows the Black3 & Green3 to have one of the lowest effective moving mass generating systems while creating an excellent balance throughout the full frequency range.

                        The development of the Epoch in the Lineage Series gave us an in-depth experience with using an outer housing as a damping device. This led to the creation of a process which de-stresses the chassis and dissipates unwanted energy & resonant frequencies, allowing the desired signal to travel freely.

                        the Grado Prestige Green is a cartridge most people will find thoroughly enjoyable for nearly all kinds of music, especially if their system is very slightly laid back. At it's price, it simply can't be beaten! If you have a moderately-priced turntable lurking in your closet, pull it out, get a Grado prestige Green

                        Thom Moon / $ensible Sound magazine

                         

                        TECHNINIAI DUOMENYS

                        SPECIFIKACIJOS

                        • Frequency Response: 10-55,000 Hz
                        • Principal: MI
                        • Channel Separation at 1KHz: 30
                        • Input Load: 47K
                        • Output at 1KHz 5CM/sec.: 5mV
                        • Recommended Tracking Force: 1.5
                        • Stylus Type: E
                        • Inductance: 45mH
                        • Resistance: 475
                        • Compliance CUs: 20
                        • Stylus Replacement: U
                        • Mounting: S/P
                        • Weight: 5.5

                                              Žiūrėti produktą

                                              Prestige serijos, prabanga, išskirtine surinkimo kokybe (surinkta rankomis) pasižymintis kartridžas iš Grado. 

                                              • Kartridže naudojamos tik prabangiausios medžiagos.
                                              • Dažnių juosta: : 10-55,000 Hz
                                              • Dvigubo magneto sistema.
                                              • Flux-Bridge™ technologija.
                                              • Kontileveris: Deimantinis galiukas.

                                               

                                              Color me awesome

                                              Image

                                              Hand-Built in Brooklyn

                                              Image

                                              Diamond Tipped

                                              Image

                                              Twin Magnet System

                                              Image

                                              Patented Flux-Bridge™

                                              Image

                                              Ultra High Purity Copper Coil

                                              Image

                                              Four Coil Unison

                                              Image

                                              De-Stressed Chasis

                                              Image

                                              Swiss Screw Machined

                                              Both the Black3 and Green3 use a three piece OTL cantilever that has a Grado specific diamond mounted on a brass bushing. The Green3 are hand selected from Black3 production runs which meet higher test specifications. Approximately 15% of the run usually exhibits these specs and become a Green3.

                                              Grado’s OTL, or optimized transmission line, technology provides an ideal transfer of signal from the surface of the LP to the generator of the system. This technology rejects unwanted resonances and lowers distortion preserving the fundamental and harmonic frequencies of the music. This also helps keep noise generated by the motor system in the cartridge to a minimum.

                                              Grado’s OTL stylus/cantilever design makes records sound quieter, improves the height, width, and depth of the soundstage, and present more detail than previously obtainable.

                                              The Black3 & Green3 are all hand assembled by our team in Brooklyn, with some builders having over 25 years of experience. With the recent development of the highly received Lineage Series of cartridges, we were able to have a trickle down of technology and bring a new technique to the Black3 & Green3. This updated series of cartridges offers excellent tonal balance, dynamics, and realism, for a most rewarding reproduction of vocals and instruments. Our coil winding techniques, using ultra high purity copper wire which were honed during the development of the Lineage Series, have let the electrical circuits achieve unison between the four coils in each phono cartridge. This allows for a precise balance between channels and accurate stereo imaging.

                                              As in all Grado phono cartridges the Black3 & Green3 are powered by a twin magnet system that optimizes the balance between stereo channels. All internal magnetic circuit parts are held to extremely high tolerances creating the desired stereo imaging. Grado’s patented Flux-Bridger design allows the Black3 & Green3 to have one of the lowest effective moving mass generating systems while creating an excellent balance throughout the full frequency range.

                                              The development of the Epoch in the Lineage Series gave us an in-depth experience with using an outer housing as a damping device. This led to the creation of a process which de-stresses the chassis and dissipates unwanted energy & resonant frequencies, allowing the desired signal to travel freely.

                                              the Grado Prestige Green is a cartridge most people will find thoroughly enjoyable for nearly all kinds of music, especially if their system is very slightly laid back. At it's price, it simply can't be beaten! If you have a moderately-priced turntable lurking in your closet, pull it out, get a Grado prestige Green

                                              Thom Moon / $ensible Sound magazine

                                               

                                              SPECIFIKACIJOS

                                              • Frequency Response: 10-55,000 Hz
                                              • Principal: MI
                                              • Channel Separation at 1KHz: 30
                                              • Input Load: 47K
                                              • Output at 1KHz 5CM/sec.: 5mV
                                              • Recommended Tracking Force: 1.5
                                              • Stylus Type: E
                                              • Inductance: 45mH
                                              • Resistance: 475
                                              • Compliance CUs: 20
                                              • Stylus Replacement: U
                                              • Mounting: S/P
                                              • Weight: 5.5