Monitor Audio Gold 200, grindinės garso kolonėlės (įvairių spalvų)

€4,620.00 EUR


Neišsirenkate garso kolonėlių namams? Turime Jums sprendimą!
Kviečiame atvykti garso aparatūros perklausai.

Pristatymas į namus nuo 4.99 €

Venipak kurjeriu per 1-2 darbo dienas.

Atsiimkite parduotuvėje 0 €

Armatūrininkų g. 1, Kaunas
Darbo laikas: I-V 9:00-18:00

Monitor Audio Gold serijos grindinės garso kolonėlės, kurios nepaliks abejingų tiek savo išvaizda, tiek garso kokybę.

  • Galia iki 200 W.
  • Dažnių juosta: 35 Hz — 50 kHz.
  • Jautrumas: 88 dB.
  • Maksimalus SPL: 114 dBA (Pora). 


 

A more compact floorstander, the Gold 200 nevertheless delivers full-scale performance. Its three-way design features two 6½" (165 mm) RDT II bass drivers beneath a 2½" (64 mm) C-CAM mid-range driver with a MPD high-frequency transducer module, backed up by dual rear-firing HiVe II ports.

All but the largest rooms will benefit from Gold 200’s remarkably tight and textured bass response, deftly informative mid-range and smooth high-frequency attack. Regardless of volume or your listening position, Gold 200’s powers of communication will move you.

 


This product is now available to use with home theatre design software, The CEDIA Designer. Read more.


Key Features

  • MPD high-frequency transducer – articulate, extended high frequencies, yet supremely smooth
  • Dual 61/2" bespoke bass drivers, featuring:
    • – RDT II Cone technology – specially developed Sandwich cone technology using thin C-CAM, Nomex honeycomb core and woven carbon fibre back skin to return incredible stiffness, yet light and well damped
    • – DCF (Dynamic Coupling Filter) – optimised to reduce high frequency cone break-up and further reduce distortion
  • Dual HiVe II ports – improved transient response and tighter bass, due to smoother air-flow
  • Pureflow silver-plated OFC copper internal cabling – highest quality transfer through the signal chain
  • Soft touch top trim – giving a luxurious, premium quality furniture grade touch and appearance
  • Single-bolt-through driver technology – providing increased bracing strength, rigidity and driver/baffle de-coupling
  • Bespoke magnetic grilles – clean visual styling, virtually acoustically transparent
  • Sturdy cast metal out-rigger feet with spike or rubber foot for carpet or hard flooring – provides more attractive appearance and takes up less floor space

SPECIFIKACIJOS

System Format

3-way

Frequency Response (-6 dB)

35 Hz – 50 kHz

Sensitivity (1W@1M)

88 dB

Nominal Impedance

4 Ohms

Minimum Impedance

3.4 Ohms @ 1 kHz

Maximum SPL

114 dBA (Pair)

Power Handling (RMS)

200 W

Recommended Amplifier Requirements

80 – 200 W

Bass Alignment

Bass Reflex
Dual HiVe II port system

Crossover Frequency

L.F/ M.F: 650 Hz
M.F/ H.F: 3.5 kHz

Drive Unit Complement

2 x 61/2RDT II long-throw bass driver
1 x 21/2C-CAM mid-range driver
1 x MPD high-frequency transducer

External Dimensions (Including Grille and Terminals (H x W x D))

950 x 195 x 330.6 mm (373/8 x 711/16 x 13")

External Dimensions (including Outrigger Feet and Spikes (H x W x D))

997 x 282.8 x 387.8 mm (391/4 x 111/8 x 151/4")

Weight (each)

21.86 kg (48 lb 2 oz)

Sold As

Pair

 


Monitor Audio Gold 200, grindinės garso kolonėlės - Piano Gloss Juoda
NEBEGAMINAMA

Monitor Audio Gold 200, grindinės garso kolonėlės (įvairių spalvų)

€4,620.00 EUR

Monitor Audio Gold serijos grindinės garso kolonėlės, kurios nepaliks abejingų tiek savo išvaizda, tiek garso kokybę.


VIDEO

 

APRAŠYMAS

A more compact floorstander, the Gold 200 nevertheless delivers full-scale performance. Its three-way design features two 6½" (165 mm) RDT II bass drivers beneath a 2½" (64 mm) C-CAM mid-range driver with a MPD high-frequency transducer module, backed up by dual rear-firing HiVe II ports.

All but the largest rooms will benefit from Gold 200’s remarkably tight and textured bass response, deftly informative mid-range and smooth high-frequency attack. Regardless of volume or your listening position, Gold 200’s powers of communication will move you.

 


This product is now available to use with home theatre design software, The CEDIA Designer. Read more.


Key Features

  • MPD high-frequency transducer – articulate, extended high frequencies, yet supremely smooth
  • Dual 61/2" bespoke bass drivers, featuring:
    • – RDT II Cone technology – specially developed Sandwich cone technology using thin C-CAM, Nomex honeycomb core and woven carbon fibre back skin to return incredible stiffness, yet light and well damped
    • – DCF (Dynamic Coupling Filter) – optimised to reduce high frequency cone break-up and further reduce distortion
  • Dual HiVe II ports – improved transient response and tighter bass, due to smoother air-flow
  • Pureflow silver-plated OFC copper internal cabling – highest quality transfer through the signal chain
  • Soft touch top trim – giving a luxurious, premium quality furniture grade touch and appearance
  • Single-bolt-through driver technology – providing increased bracing strength, rigidity and driver/baffle de-coupling
  • Bespoke magnetic grilles – clean visual styling, virtually acoustically transparent
  • Sturdy cast metal out-rigger feet with spike or rubber foot for carpet or hard flooring – provides more attractive appearance and takes up less floor space

TECHNINIAI DUOMENYS

SPECIFIKACIJOS

System Format

3-way

Frequency Response (-6 dB)

35 Hz – 50 kHz

Sensitivity (1W@1M)

88 dB

Nominal Impedance

4 Ohms

Minimum Impedance

3.4 Ohms @ 1 kHz

Maximum SPL

114 dBA (Pair)

Power Handling (RMS)

200 W

Recommended Amplifier Requirements

80 – 200 W

Bass Alignment

Bass Reflex
Dual HiVe II port system

Crossover Frequency

L.F/ M.F: 650 Hz
M.F/ H.F: 3.5 kHz

Drive Unit Complement

2 x 61/2RDT II long-throw bass driver
1 x 21/2C-CAM mid-range driver
1 x MPD high-frequency transducer

External Dimensions (Including Grille and Terminals (H x W x D))

950 x 195 x 330.6 mm (373/8 x 711/16 x 13")

External Dimensions (including Outrigger Feet and Spikes (H x W x D))

997 x 282.8 x 387.8 mm (391/4 x 111/8 x 151/4")

Weight (each)

21.86 kg (48 lb 2 oz)

Sold As

Pair

 


Žiūrėti produktą

Monitor Audio Gold serijos grindinės garso kolonėlės, kurios nepaliks abejingų tiek savo išvaizda, tiek garso kokybę.

  • Galia iki 200 W.
  • Dažnių juosta: 35 Hz — 50 kHz.
  • Jautrumas: 88 dB.
  • Maksimalus SPL: 114 dBA (Pora). 


 

A more compact floorstander, the Gold 200 nevertheless delivers full-scale performance. Its three-way design features two 6½" (165 mm) RDT II bass drivers beneath a 2½" (64 mm) C-CAM mid-range driver with a MPD high-frequency transducer module, backed up by dual rear-firing HiVe II ports.

All but the largest rooms will benefit from Gold 200’s remarkably tight and textured bass response, deftly informative mid-range and smooth high-frequency attack. Regardless of volume or your listening position, Gold 200’s powers of communication will move you.

 


This product is now available to use with home theatre design software, The CEDIA Designer. Read more.


Key Features

  • MPD high-frequency transducer – articulate, extended high frequencies, yet supremely smooth
  • Dual 61/2" bespoke bass drivers, featuring:
    • – RDT II Cone technology – specially developed Sandwich cone technology using thin C-CAM, Nomex honeycomb core and woven carbon fibre back skin to return incredible stiffness, yet light and well damped
    • – DCF (Dynamic Coupling Filter) – optimised to reduce high frequency cone break-up and further reduce distortion
  • Dual HiVe II ports – improved transient response and tighter bass, due to smoother air-flow
  • Pureflow silver-plated OFC copper internal cabling – highest quality transfer through the signal chain
  • Soft touch top trim – giving a luxurious, premium quality furniture grade touch and appearance
  • Single-bolt-through driver technology – providing increased bracing strength, rigidity and driver/baffle de-coupling
  • Bespoke magnetic grilles – clean visual styling, virtually acoustically transparent
  • Sturdy cast metal out-rigger feet with spike or rubber foot for carpet or hard flooring – provides more attractive appearance and takes up less floor space

SPECIFIKACIJOS

System Format

3-way

Frequency Response (-6 dB)

35 Hz – 50 kHz

Sensitivity (1W@1M)

88 dB

Nominal Impedance

4 Ohms

Minimum Impedance

3.4 Ohms @ 1 kHz

Maximum SPL

114 dBA (Pair)

Power Handling (RMS)

200 W

Recommended Amplifier Requirements

80 – 200 W

Bass Alignment

Bass Reflex
Dual HiVe II port system

Crossover Frequency

L.F/ M.F: 650 Hz
M.F/ H.F: 3.5 kHz

Drive Unit Complement

2 x 61/2RDT II long-throw bass driver
1 x 21/2C-CAM mid-range driver
1 x MPD high-frequency transducer

External Dimensions (Including Grille and Terminals (H x W x D))

950 x 195 x 330.6 mm (373/8 x 711/16 x 13")

External Dimensions (including Outrigger Feet and Spikes (H x W x D))

997 x 282.8 x 387.8 mm (391/4 x 111/8 x 151/4")

Weight (each)

21.86 kg (48 lb 2 oz)

Sold As

Pair